Universal Wiring Harness For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*dtlilly* · 02-08-2004, 12:24 AM

I bought this for the GMC a year ago and never got that far along in the project to use it.

It is a 14 fused panel and harness that will completely rewire any vehicle including fiberglass and plastic vehicles. It is made by Haywire, and you can go the their web site at haywireinc.com for detailed info about this.

Everything is still here, including instuction book. The reciept shows $362.14 purchase price. I will take $225 or best offer/trade. I need 71-72 inner and outer grille in excellent shape, passenger inner and outer fender for 68-72 chevy. I'm also looking for bucket seat brackets to install factory truck buckets in a 72 that had a bench seat.

ljbear · 02-08-2004, 12:49 AM

Don,

Was this for a keyed column or dash ignition? I was thinking Painless, only because I've never heard of this company. I got a set of 69/72 fenders that are in pretty decent shape, pm an email and I'll send a picture.

Larry

Blue Beard · 02-08-2004, 12:57 AM

Sounds like a good price, although I've never heard of that brand.....

*dtlilly* · 02-08-2004, 01:05 AM

Here's a close up of the fuse box, also the headlight switch, floor style dimmer switch, and dash style iglition switch.

The harness is complete from headlights to tail lights, and includes wiring for power windows/locks, A/C, seats, alarm, etc, etc, it does it all.

It is a universal, so the ends do not have specific connectors. It comes with a box of connectors, butt ends, shrink wrap style rubber protectors, etc. Everything is numbered, color coded and labled for ease of install. It suggests using your factory connectors for the hard to find ones.

03glide · 02-08-2004, 01:15 AM

"I need 71-72 inner and outer grille in excellent shape, passenger inner and outer fender for 68-72 chevy". Aren't you selling a fender on another thread?

*dtlilly* · 02-08-2004, 01:19 AM

Yep, the fender on the other thread is for a 68-72 GMC, I need perfect Chevy passenger side inner and outer fender.

03glide · 02-08-2004, 01:29 AM

A '68 Chevy and a "68 GMC fender are the same. Aren't they?

*dtlilly* · 02-08-2004, 01:32 AM

Yes, the will interchange.

03glide · 02-08-2004, 01:37 AM

O.K. Do you under stand my confusion. In 1 thread you are selling a 68-72 pass fender and in another you say you need one.
Brian

*dtlilly* · 02-08-2004, 02:10 AM

The fender I have for sale is a 68-72 GMC fender. It will work on a 68 Chevy, actually will work on 67 Chevy too if you fill in the side marker light. The 67-72 GMC fenders and the 67-68 fenders are different shaped at the front

I am restoring a 72 Chevy (the C-30 with a 9 foot step side bed in my signiture). I can only use fenders for 69-72 Chevy. The fender I'm selling was purchased for the 71 GMC I sold here last week.

Your restoring a 68 Chevy, and this fender will interchange and work perfect for you.

*dtlilly* · 02-08-2004, 02:14 AM

Here is a recent link that may shed more light on this subject.
http://67-72chevytrucks.com/vboard/s...threadid=89160

03glide · 02-08-2004, 04:21 PM

How about giving me shipping to 28357. Thanks, Brian

*dtlilly* · 02-08-2004, 04:38 PM

I'll get it for you Monday.

Anybody have any interest in the complete universal wiring harness and 14 fused block?

03glide · 02-08-2004, 05:23 PM

Thank you.

*dtlilly* · 02-09-2004, 10:11 PM

ttt, still need to sell/trade this wiring harness.

race2c · 02-10-2004, 12:40 AM

I may have some fenders/ inner fenders for sale. I am not sure of the years but I will check on them for you.

Cam

*dtlilly* · 02-10-2004, 01:20 PM

Thanks Cam. Let me know whwt you have and condition, Thanks, Don.

race2c · 02-15-2004, 09:00 PM

dtlilly-- I will try to get pics on Monday, the 15th.

Cam

Hotrodhenryj · 02-15-2004, 11:00 PM

Don, I PM'ed you about the harness but got no responce. I have parts you need and also some you may not. Let me know if your interested in a trade. Thanks, Chuck

02-08-2004, 12:24 AM	#1
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Universal Wiring Harness For Sale I bought this for the GMC a year ago and never got that far along in the project to use it. It is a 14 fused panel and harness that will completely rewire any vehicle including fiberglass and plastic vehicles. It is made by Haywire, and you can go the their web site at haywireinc.com for detailed info about this. Everything is still here, including instuction book. The reciept shows $362.14 purchase price. I will take $225 or best offer/trade. I need 71-72 inner and outer grille in excellent shape, passenger inner and outer fender for 68-72 chevy. I'm also looking for bucket seat brackets to install factory truck buckets in a 72 that had a bench seat.

02-08-2004, 12:49 AM	#2
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Don, Was this for a keyed column or dash ignition? I was thinking Painless, only because I've never heard of this company. I got a set of 69/72 fenders that are in pretty decent shape, pm an email and I'll send a picture. Larry __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-08-2004, 12:57 AM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Sounds like a good price, although I've never heard of that brand..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-08-2004, 01:05 AM	#4
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Here's a close up of the fuse box, also the headlight switch, floor style dimmer switch, and dash style iglition switch. The harness is complete from headlights to tail lights, and includes wiring for power windows/locks, A/C, seats, alarm, etc, etc, it does it all. It is a universal, so the ends do not have specific connectors. It comes with a box of connectors, butt ends, shrink wrap style rubber protectors, etc. Everything is numbered, color coded and labled for ease of install. It suggests using your factory connectors for the hard to find ones. Last edited by dtlilly; 02-08-2004 at 01:10 AM.

02-08-2004, 01:15 AM	#5
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	"I need 71-72 inner and outer grille in excellent shape, passenger inner and outer fender for 68-72 chevy". Aren't you selling a fender on another thread? Last edited by 03glide; 02-08-2004 at 01:26 AM.

02-08-2004, 01:19 AM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Yep, the fender on the other thread is for a 68-72 GMC, I need perfect Chevy passenger side inner and outer fender.

02-08-2004, 01:29 AM	#7
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	A '68 Chevy and a "68 GMC fender are the same. Aren't they?

02-08-2004, 01:32 AM	#8
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Yes, the will interchange.

02-08-2004, 01:37 AM	#9
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	O.K. Do you under stand my confusion. In 1 thread you are selling a 68-72 pass fender and in another you say you need one. Brian

02-08-2004, 02:10 AM	#10
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	The fender I have for sale is a 68-72 GMC fender. It will work on a 68 Chevy, actually will work on 67 Chevy too if you fill in the side marker light. The 67-72 GMC fenders and the 67-68 fenders are different shaped at the front I am restoring a 72 Chevy (the C-30 with a 9 foot step side bed in my signiture). I can only use fenders for 69-72 Chevy. The fender I'm selling was purchased for the 71 GMC I sold here last week. Your restoring a 68 Chevy, and this fender will interchange and work perfect for you.

02-08-2004, 02:14 AM	#11
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Here is a recent link that may shed more light on this subject. http://67-72chevytrucks.com/vboard/s...threadid=89160

02-08-2004, 04:21 PM	#12
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	How about giving me shipping to 28357. Thanks, Brian

02-08-2004, 04:38 PM	#13
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I'll get it for you Monday. Anybody have any interest in the complete universal wiring harness and 14 fused block?

02-08-2004, 05:23 PM	#14
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Thank you.

02-09-2004, 10:11 PM	#15
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	ttt, still need to sell/trade this wiring harness.



Register or Log In To remove these advertisements.

02-10-2004, 12:40 AM	#16
race2c <--Thanks 86 Red Bowtie Join Date: Aug 2003 Location: Mt. Zion IL (Home) Stillwater, OK (School) Posts: 140	I may have some fenders/ inner fenders for sale. I am not sure of the years but I will check on them for you. Cam __________________ race2c@aol.com 1941 Willys Coupe--Currently being put together. Willy Works fiberglass car. 1969 Chevy K10 SWB--SOLD!!! 1989 Chevy Silverado Z71 RCSB--SOLD!!! 1993 Pontiac Grand Prix--College Commuter

02-10-2004, 01:20 PM	#17
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Thanks Cam. Let me know whwt you have and condition, Thanks, Don.

02-15-2004, 09:00 PM	#18
race2c <--Thanks 86 Red Bowtie Join Date: Aug 2003 Location: Mt. Zion IL (Home) Stillwater, OK (School) Posts: 140	dtlilly-- I will try to get pics on Monday, the 15th. Cam __________________ race2c@aol.com 1941 Willys Coupe--Currently being put together. Willy Works fiberglass car. 1969 Chevy K10 SWB--SOLD!!! 1989 Chevy Silverado Z71 RCSB--SOLD!!! 1993 Pontiac Grand Prix--College Commuter

02-15-2004, 11:00 PM	#19
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Don, I PM'ed you about the harness but got no responce. I have parts you need and also some you may not. Let me know if your interested in a trade. Thanks, Chuck __________________ Arizona rust free sheetmetal

Register or Log In To remove these advertisements.