Engine Hoist Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stepsides 4Ever · 02-10-2004, 05:36 PM

I'm not trying to advertise for this outfit, but Manny, Moe & Jack (the Pep Boys) has a Torin 2-Ton engine hoist on sale until Feb. 13 for $119.95, if anyone is in need of one.

This is my first post, so I hope I did this right...

03glide · 02-10-2004, 05:38 PM

Thanks, I've been looking for one. Welcome to the board from NC.

**'70_402** · 02-10-2004, 05:46 PM

thanks for the info... welcome to the board from the great state of Texas

Chevyguy111786 · 02-10-2004, 08:28 PM

WELCOME!! and Harbor Freight has Engine stand for like 40 bucks...any one use these? They any good?

bestchevyfan · 02-10-2004, 08:33 PM

HI, FROM OLD ALABAMA.

krue · 02-10-2004, 08:45 PM

Welcome from South Mississippi!

ChevyDude · 02-10-2004, 09:01 PM

Very Cool!!! Going to get one tomorrow!

Thanks!

**FRENCHBLUE72** · 02-10-2004, 10:16 PM

Welcome to the board from southern oregon.... Thank's for the info..

Blue Beard · 02-10-2004, 11:53 PM

Welcome from SW Washington State..........

**Bernie** · 02-10-2004, 11:57 PM

Welcome from Illinois.

Huck · 02-11-2004, 10:32 AM

PERFECT TIMING---I CAN BUY THIS, PUT A BIG RIBBON ON IT AND GIVE IT TO THE MISS'ES FOR VALENTINES DAY.

NOW IF'IN ANYONE HERE'S BOUT A GUY FOUND HUNG BY A RIBBON FROM A MOTOR HOIST DOWN IN KENTUCKY--IT MIGHT JUST BE ME!!!!!!!!!!!!!!!!!!

huck!!!!!!!!!!!!

MOTHERTRUCKERS · 02-11-2004, 10:56 AM

We bought 6 of the 4 legged engine stands from Harbor Freight 2 years ago and have had big block complete motors on them with no problems. Drove 7 miles to pick them up at the Sarasota store.

danho · 02-11-2004, 11:00 AM

I have one of the stands also and it works good. Just make sure you grease the hub on the stand or turning the motor is a real pain, at least it was with mine.
Dan.

MOTHERTRUCKERS · 02-11-2004, 11:12 AM

Harbor Freight 2 ton 79.99 3 ton 99.99

stllookn · 02-11-2004, 12:44 PM

Welcome from Seattle, WA. Post some pics of your truck! Or just tell us about it.

**COBALT** · 02-11-2004, 01:19 PM

Howdy from Seattle.

My opinion of Harbor Freight (Fright) isn't very good. I got one of their $40 engine stands, and it will do the job, but it's a cast-iron beast. I'm hesitant to use the ears that connect the block to the holding plate because they're cast and don't look very strong. The plate itself uses a kneck to slide into the stand, and the welding looks like it won't hold up. Another thing was that 1/2 of the bolts were missing when it showed up. There was a giant hole in the box all of the hardware dissapeared through while in transit. Piss-poor shipping.

Right now it's decorating my dad's shop and hasn't been used yet.

If you're going to invest in stuff like this I'd recomend getting a good used one you know works well...or buy a new one from a good distributor.

Stepsides 4Ever · 02-11-2004, 02:26 PM

WOW! Thanks for the warm reception and greetings to all from sunny (and lately, very windy!) So. California!

My experience with Harbor Freight Tools, probably like most of you, has been hit-or-miss; some of their stuff is junk, some of it is a real bargain. I probably would have bought the engine hoist from them for $79.99 over the one I bought for $120 (assuming they were of equivalent quality), but they don't show that price in their online catalog, so (to me) that means it's probably a where-is, as-is kind of deal...YMMV. Anyway, I don't get a commission from either Manny, Moe, or Jack, so the less you spend on tools the more have to spend on truck parts!

I would love to buy a good, used one and save the $$$ as well as having a known working item, but it always seems that nobody is selling when I'm buying! The shipping on a heavy item like that will eat you alive...although you could prolly ship it by truck for a lot less if you knew how...

Stepsides 4Ever · 02-11-2004, 02:48 PM

After casually looking for the past few years, we found a '70 Chevy SWB Stepside in very good condition for $2k...the down side is that it hasn't been registered or non-op'ed since 2000, so the back registration fees and penalties in CA amount to about $400...the truck has a tired and smoky 6 cyl., and is located about 55 miles from where we live, so I upgraded my AAA membership in order to get it towed to its new home.

The truck is out of the desert and is relatively rust-free...the bed and tailgate are in excellent shape, but there are a few holes on the bed rails that need to be filled. The wood is missing in areas of the bed floor, but all the metal strips are there and in excellent shape. The cab is very good, fenders are all very good with the exception of the front passenger side which has a ding in the forward wheel housing area. The grille is "modified", the front bumper is not an original, rear bumper is the diamond plate step type. The dash is uncut, although someone has added a couple of aftermarket gauges to the bezel. The 3-speed manual tranny has been converted to a floor shift. The PO doesn't know if the bench seat is original or not...it's been re-uphostered, and it has a hump in the middle, but it sure fits nice and is comfortable to sit on. The seat mount looks original, so I'll take some pics when I get it home and let you guys tell me if it's original.

It starts right up and runs real smooth, although it is a bit smoky at idle...definitely will attract the Highway Patrol if I tried to drive it home.

The plan is to upgrade it to a SBC/auto/PDB/PS/AC, but I don't want to make it too nice to where we're afraid to drive it or haul anything in it...and I don't want to get too far away from stock because the truck is so nice to begin with...

ChevyDude · 02-11-2004, 03:41 PM

I have been looking for a hoist for sometime now and just didn't want to spend two hundo. Went to Pep Boys and bought the Torin. Folds up, looks sturdy , and will do what I need. Thanks for the sale tip off. $126 and change (after tax) and she's home!
I'm going to pull the engine on my 71' before she goes to paint next week.

Jace's68 · 02-11-2004, 04:49 PM

Welcome from Western Kentucky. Thanks for the info.

subfitter · 02-11-2004, 04:59 PM

another welcome from washington-just got back from pep boys and very happy with hoist and price-

**lock** · 02-11-2004, 06:51 PM

Checking it out on the way home. I need one for Friday. Perfect timing. thanks!

**lock** · 02-14-2004, 12:15 AM

Well perfectiming for this sale. Bought one last night and used it today to unload my new motor for the truck. Thanks for the tip!

*rage'nrat638* · 02-14-2004, 12:27 AM

yup....welcome......got to love'em

03glide · 02-14-2004, 02:33 AM

Picked mine up on the way home from work tonight. It is now assembled and folded in the corner of the garage. Going to pull the motor off the frame tomorrow and reomove a cab from another truck. Saw the load leveler in 1 pic. I didn't see that at Pep Boys. Did you get it somewhere else?

02-10-2004, 05:36 PM	#1
Stepsides 4Ever Stepsides Are Bedder Join Date: Feb 2004 Location: Norco, CA Posts: 238	Engine Hoist Sale I'm not trying to advertise for this outfit, but Manny, Moe & Jack (the Pep Boys) has a Torin 2-Ton engine hoist on sale until Feb. 13 for $119.95, if anyone is in need of one. This is my first post, so I hope I did this right...

02-10-2004, 05:46 PM	#3
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	thanks for the info... welcome to the board from the great state of Texas __________________ https://www.ebay.com/itm/295742064443

02-10-2004, 08:33 PM	#5
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Engine Hoist Sale HI, FROM OLD ALABAMA.

02-10-2004, 08:45 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Welcome from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-10-2004, 09:01 PM	#7
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Thanks Very Cool!!! Going to get one tomorrow! Thanks! __________________ Alex 1971 Lil' Red 350 SBC 700R4

02-10-2004, 05:38 PM	#2
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Thanks, I've been looking for one. Welcome to the board from NC.

02-10-2004, 08:28 PM	#4
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	WELCOME!! and Harbor Freight has Engine stand for like 40 bucks...any one use these? They any good?

02-10-2004, 10:16 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Welcome to the board from southern oregon.... Thank's for the info.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-10-2004, 11:53 PM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Welcome from SW Washington State.......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-10-2004, 11:57 PM	#10
Bernie Senior Member Join Date: Jan 2001 Location: Northern Illinois Posts: 516	Welcome from Illinois. __________________ Bernie

02-11-2004, 10:32 AM	#11
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	PERFECT TIMING---I CAN BUY THIS, PUT A BIG RIBBON ON IT AND GIVE IT TO THE MISS'ES FOR VALENTINES DAY. NOW IF'IN ANYONE HERE'S BOUT A GUY FOUND HUNG BY A RIBBON FROM A MOTOR HOIST DOWN IN KENTUCKY--IT MIGHT JUST BE ME!!!!!!!!!!!!!!!!!! huck!!!!!!!!!!!!

02-11-2004, 10:56 AM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We bought 6 of the 4 legged engine stands from Harbor Freight 2 years ago and have had big block complete motors on them with no problems. Drove 7 miles to pick them up at the Sarasota store. __________________ Rest in Peace Ed. Thanks for all the good times.

02-11-2004, 11:00 AM	#13
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	I have one of the stands also and it works good. Just make sure you grease the hub on the stand or turning the motor is a real pain, at least it was with mine. Dan.

02-11-2004, 11:12 AM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Harbor Freight 2 ton 79.99 3 ton 99.99 __________________ Rest in Peace Ed. Thanks for all the good times.

02-11-2004, 12:44 PM	#15
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Welcome from Seattle, WA. Post some pics of your truck! Or just tell us about it. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

02-11-2004, 01:19 PM	#16
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Howdy from Seattle. My opinion of Harbor Freight (Fright) isn't very good. I got one of their $40 engine stands, and it will do the job, but it's a cast-iron beast. I'm hesitant to use the ears that connect the block to the holding plate because they're cast and don't look very strong. The plate itself uses a kneck to slide into the stand, and the welding looks like it won't hold up. Another thing was that 1/2 of the bolts were missing when it showed up. There was a giant hole in the box all of the hardware dissapeared through while in transit. Piss-poor shipping. Right now it's decorating my dad's shop and hasn't been used yet. If you're going to invest in stuff like this I'd recomend getting a good used one you know works well...or buy a new one from a good distributor. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

02-11-2004, 02:26 PM	#17
Stepsides 4Ever Stepsides Are Bedder Join Date: Feb 2004 Location: Norco, CA Posts: 238	Engine Hoist Sale WOW! Thanks for the warm reception and greetings to all from sunny (and lately, very windy!) So. California! My experience with Harbor Freight Tools, probably like most of you, has been hit-or-miss; some of their stuff is junk, some of it is a real bargain. I probably would have bought the engine hoist from them for $79.99 over the one I bought for $120 (assuming they were of equivalent quality), but they don't show that price in their online catalog, so (to me) that means it's probably a where-is, as-is kind of deal...YMMV. Anyway, I don't get a commission from either Manny, Moe, or Jack, so the less you spend on tools the more have to spend on truck parts! I would love to buy a good, used one and save the $$$ as well as having a known working item, but it always seems that nobody is selling when I'm buying! The shipping on a heavy item like that will eat you alive...although you could prolly ship it by truck for a lot less if you knew how...

02-11-2004, 02:48 PM	#18
Stepsides 4Ever Stepsides Are Bedder Join Date: Feb 2004 Location: Norco, CA Posts: 238	As far as the truck goes... After casually looking for the past few years, we found a '70 Chevy SWB Stepside in very good condition for $2k...the down side is that it hasn't been registered or non-op'ed since 2000, so the back registration fees and penalties in CA amount to about $400...the truck has a tired and smoky 6 cyl., and is located about 55 miles from where we live, so I upgraded my AAA membership in order to get it towed to its new home. The truck is out of the desert and is relatively rust-free...the bed and tailgate are in excellent shape, but there are a few holes on the bed rails that need to be filled. The wood is missing in areas of the bed floor, but all the metal strips are there and in excellent shape. The cab is very good, fenders are all very good with the exception of the front passenger side which has a ding in the forward wheel housing area. The grille is "modified", the front bumper is not an original, rear bumper is the diamond plate step type. The dash is uncut, although someone has added a couple of aftermarket gauges to the bezel. The 3-speed manual tranny has been converted to a floor shift. The PO doesn't know if the bench seat is original or not...it's been re-uphostered, and it has a hump in the middle, but it sure fits nice and is comfortable to sit on. The seat mount looks original, so I'll take some pics when I get it home and let you guys tell me if it's original. It starts right up and runs real smooth, although it is a bit smoky at idle...definitely will attract the Highway Patrol if I tried to drive it home. The plan is to upgrade it to a SBC/auto/PDB/PS/AC, but I don't want to make it too nice to where we're afraid to drive it or haul anything in it...and I don't want to get too far away from stock because the truck is so nice to begin with...

02-11-2004, 03:41 PM	#19
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Hoist I have been looking for a hoist for sometime now and just didn't want to spend two hundo. Went to Pep Boys and bought the Torin. Folds up, looks sturdy , and will do what I need. Thanks for the sale tip off. $126 and change (after tax) and she's home! I'm going to pull the engine on my 71' before she goes to paint next week. __________________ Alex 1971 Lil' Red 350 SBC 700R4

02-11-2004, 04:49 PM	#20
Jace's68 Registered User Join Date: Sep 2002 Location: Kentucky Posts: 107	Welcome from Western Kentucky. Thanks for the info.

02-11-2004, 04:59 PM	#21
subfitter Registered User Join Date: Dec 2003 Location: gig harbor wa. Posts: 57	thanks another welcome from washington-just got back from pep boys and very happy with hoist and price-

02-11-2004, 06:51 PM	#22
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Checking it out on the way home. I need one for Friday. Perfect timing. thanks! __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

02-14-2004, 12:15 AM	#23
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Well perfectiming for this sale. Bought one last night and used it today to unload my new motor for the truck. Thanks for the tip! __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

02-14-2004, 12:27 AM	#24
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	yup....welcome......got to love'em Last edited by rage'nrat638; 07-12-2007 at 07:07 AM.

02-14-2004, 02:33 AM	#25
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Picked mine up on the way home from work tonight. It is now assembled and folded in the corner of the garage. Going to pull the motor off the frame tomorrow and reomove a cab from another truck. Saw the load leveler in 1 pic. I didn't see that at Pep Boys. Did you get it somewhere else?

Register or Log In To remove these advertisements.