PARTS..PARTS...PARTS...tires, wheels, lift kits, etc

[90blzr]

Cleaning up again and need to move some of this stuff. I dont wanna move it to the new storage. All prices are plus shipping. Pics available upon request.

Also have many parts for a 1999-2002 Chevy 1/2. drivetrain, bed, front clip (might be an 03 clip, but if intersted I can find out), interior, axles, etc.


***TIRES/WHEELS***


** (3) 38.5x16x15 Swamper SXs good for spares, have little tread, $30 each

** (4) 38x15.50x15 Ground Hawg II Radials. 95% plus tread. GREAT shape. set of four $1000.

** (1) 35x12.50x15 Swamper Radial SSR. Used for spare, little tread, mounted on 6 lug steel wheel. $50

** (1)36x12.50x16 Swamper Radial, spare, little tread, $40

** (4) Stock blazer wheels with center caps and beauty rings set of four $100

** (4) 33x13.50x16 Swamper LTBs with about 75%+ tread $300

** (4) 33x14.50x15 Mickey Thompson Baja Belted about 15% $50 takes them all.


** (2) 35x12.50x16 BFG All Terrain KO's with about 90% tread $200 for the pair!



***MISC***


** HURST SHIFTER - handle and boot, great shape $25

** SUBURBAN INTERIOR TRIM - trim pieces (blue) from an 88 suburban $50

** Borla Stainless Muffler 19"x9.5" $50

** Running boards off of a K5 blazer. Diamond plate, good shape. $50/pair

** Nerf bars for 2000-ish Ford F-150 ext. cab shortbed. Chrome, good shape with scratch on bottom. $150/pair.


** Roll pan 88-99 brand new, with licens plate box. $150 shipped.

** Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $80 shipped

** F150 stock upper and lower control arms, complete $100/set

** 1999 chevy S-10 bench seat, gray cloth, like brand new. $100

** 1999 chevy S-10 stock lenses (in grill/parking light or turn signal, cant remember ) $25/pair

** 1984 chevy S-10 rear end. 3.42 gears, good shape, complete drum to drum $150



***DRIVETRAIN***


** Vortec engine, 5.3, 4L60E, NP246 includes ALL WIRING, ALL COMPUTERS, everything you will need is there. All still hooked up and not butchered at all. Everything has under 40K on it. Still like new! Out off 2001 chevy

** 14bff, shafts, carrier, 3.73 gears, housing, hubs, drumbs,
etc.

** Rear disc brake axle from newer chevy. Great shape, like new, complete from caliper to caliper. 3.73's. open. $600

** Dana 60 front 4.56 ring, pinion, and 4.56 and up carrier. All BRAND NEW, never used, still in the original boxes. $250

** Th350 automatic, 4wd, ran great when pulled. long shaft.
$100

** 700R4/241 combo out of 1990 K5. Tranny shifts/run fine, NP241 fine, just need to replace seal on t-case. R4 shift hard in first at times. Make reasonable offer.

* REAR sway bar from a 14bff $75



***SUSPENSION***


** 4" Trailmaste lift kit for a 88-98 Chevy 1/2T truck. GREAT shape. complete with shocks, etc. Also have aluminum skid plate. $1000 obo.

** 6" Superlift kit, 3" body lift, 36" TLS Radials on Weld Super Single II's. Fits 1999-2003 chevy 4x4. COMPLETE and in greats shape. Dual shocks, etc. EVERYTHING is there. $2300

** 3" drop kit came from 2000 F-150, belltech. coils and hangers. good shape. $100

[BladeX]

I know itd be madness but how bout some little pics?

[90blzr]

madness....how do you think I feel going through and having to move all of this crap around

Let me know what you are intersted in and I'll send you some pics.
Thanks!

[BladeX]

** Running boards off of a K5 blazer. Diamond plate, good shape. $50/pair

[90blzr]

you have an email

[79Chevypickup]

Id be interested in the

Borla exaust (size? of inlet/outlet)
AND
Fog lights

How much shipped to 77502?
Pics please

moandcat@yahoo.com

[90blzr]

Emailed you pics of the muffler, and I have a sale pending on the fog lights.
let me know.

[8t5Silverado]

Will the swaybar fit an 85 LWB?

Do you have all of the hardware to attach it?

If so, I am interested.

[90blzr]

I would think so....it came from a 3/4T burban.. the only thing you might have to change is the ubolts.
Let me know. I can email you pics if you want.

[rich-white]

8t5silverado check your pm

[87Silvy]

I'd like to see pics of that Hurst shifter if ya don't mind.

[flip66]

do you have pictures of the trim peices I am intrested in door panels the trim around the widows email pic to a0001589@airmail.net

[NAPCO ken]

sent you a PM regarding the blazer wheels w/ trim rings and caps.

[90blzr]

need this stuff gone!

[CRRoy71]

Do you still have the axles out of the 90 model? If so, could you possilbly ship them? Do you know if they would fit on an '86 k5, and do they have the 6 x 5.5 bolt pattern?

Thanks

[90blzr]

I just shipped off the axles last night. I was suprised it took so long. Hek, the auburn alone was worth almost what I was asking, not to mention the newer gears and 30 spline axles.

I do have a buddy that has a set of 12 bolt rear and D44 front set up with 3.73's in it. They are from a 1976 K5. They are 6 lug and appear to be in good shape and are complete. I think he wanted $400 for the pair of those.
Let me know if you are interested either way. And yes, they will bolt up to your 86.

[CRRoy71]

Dang! that is my luck. I think my rear end just went out yesterday, and I remembered this post. Oh well a day late, and a dollar short I may be interested in your friends set up, are they both open, or do they have a posi unit in them?

[90blzr]

They are both open. they are under the vehicle right now and running with no problems.
He will have them out by the weekend. Where are you located?

You dont know anyone lookin for some 38" hawgs do you? Like new.

[CRRoy71]

I am in Dayton TX 77535. If you can, let me know how much he wants with shipping, and I will give you a definate answer.

Thanks

[90blzr]

I've sent you a pm.

[90blzr]

anyone else on any of these parts?

[hvychvy]

Could I see some pics of the 90 4" lift?

[dinnut]

do you still have the hurst shifter? interested in pics! dinnut@earthlink.net please!

[Codeman]

Any pics of the flowmaster and airraid intake for the 99-03? What flow muffler is it?

[90blzr]

Originally posted by hvychvy
Could I see some pics of the 90 4" lift?

Sorry, lift for the 90 K5 has just been sold
Thanks.