F/s '72 Air Cab!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

03glide · 02-11-2004, 05:16 PM

Uncut dash! Some poor patch work was done on rockers. Center of floors are solid. Brake pedal and parking brake, doors, and seat in pics are not included. Will be leaving sunvisors and gas tank. Good rear window. Firewall and cowl solid. $75.00. Dash should be worth more than half of that. I can email more pics with request.
Brian

03glide · 02-11-2004, 05:17 PM

2

03glide · 02-11-2004, 05:18 PM

previous pic showed small rust through and patch on driver's floor.

03glide · 02-11-2004, 05:18 PM

Sorry, no title.

vtblazer · 02-11-2004, 07:32 PM

How's the entire firewall? How about the bottom of the front door pillars's
I'm looking for a firewall for my blazer...would this work?
No rust please.
I need good metal down to the factory weld seam.
Inner kick panels?
If you still have it, could you send some pic's to my e-mail?
Thanks, address: triaddelec@trans-video.net

olblue60@aol.com · 02-11-2004, 07:35 PM

I'll Give you $75 for the dash.Dont need or want to pay for the cab to get to me. Also like the 68 grille you have.Make me a deal and ship the two together.

John

03glide · 02-11-2004, 07:37 PM

I'm not sure if it would fit your Blazer. Maybe someone else can answer that question. The firewall is solid. I will have to look at the lower door posts to be sure. I can take some pics but it will be tomorrow morning since it is already dark here.

vtblazer · 02-11-2004, 07:57 PM

From what I understand it will work. Just a little metal surgery to the top/roof.
If knowone else has said they'd take it...send me the pic's, please. I'm very interseted in it. Being it's solid and all.
Take a pic of where the frame rails wrap up on the firewall while your there, thanks. The seam line also please.

03glide · 02-12-2004, 01:11 PM

The cab sold yesterday.
vtblazer- I have another cab that may fit your needs. It is a '68. I will take some pics of it today at lunch. It has a solid firewall all the way to the windshield base. The roof is trashed, but if I am reading correctly the firewall is your interest.

olblue- I sold the grill; however I have another 68 grill which has no dents, perfect, including a hood latch, grill stiffener, and lower deflector(attaches to bottom of grill and core support). This grill does not have the trim where the parking lights attach. I am waiting for a response from a board member on this grill, but if he is not interested I'll take $100

olblue60@aol.com · 02-12-2004, 05:01 PM

Hi Brian
I want to thank you for getting back to me.As far as a grille is concerned. I'm not looking for a necessarly straight or rust free grille.The one on my truck alreadt is.What I need is just the upper opening tray. Someone cut the one in my grille and mounted a pair of fog lights over the turnsignals.Does that make any sence, anyway, the other parts that you offered with your grill arent necessary.I'm mainly after the tray. How about that a/c dash for in the 72 cab? I'll give $75, the price of the whole cab and you will still have the rest to make money with. Thanks Brian!

John

olblue60@aol.com · 02-12-2004, 05:04 PM

OOPS!
I hadnt read your reply that was posted above the one sent to me. Just noticed the cab is gone.Thanks anyway Brian

John

03glide · 02-12-2004, 05:10 PM

Cab is sold already. Sorry. I do have the upper tray from a dented grill. It is not perfect but should serve the purpose. WHAT is the purpose of the upper tray? I'll take $15 + shipping.

olblue60@aol.com · 02-12-2004, 05:23 PM

WOW!
You dont know how hard it has been for me to locate one of these without the grille. This is the part that is riveted to the back of the upper grille opening, usually black,right? You made my day! Heres my zip for shipping 20901 .Thanks Brian!

John

03glide · 02-12-2004, 06:15 PM

Glad I could help. Can you tell me the purpose of the top one. I know the bottom holds the parking lights. I'll PM you shipping and address.

olblue60@aol.com · 02-12-2004, 08:18 PM

Brian
I dont really know if there is a purpose other than looks. the one in my truck seems to have no purpose, it just adds some depth to the look of the grille.

John

olblue60@aol.com · 02-18-2004, 07:34 PM

Did you get my Paypal?

03glide · 02-19-2004, 12:22 PM

Yes. Sent pm.

02-11-2004, 05:16 PM	#1
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	F/s '72 Air Cab!! Uncut dash! Some poor patch work was done on rockers. Center of floors are solid. Brake pedal and parking brake, doors, and seat in pics are not included. Will be leaving sunvisors and gas tank. Good rear window. Firewall and cowl solid. $75.00. Dash should be worth more than half of that. I can email more pics with request. Brian Attached Images

02-11-2004, 05:17 PM	#2
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	2 Attached Images

02-11-2004, 05:18 PM	#3
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	previous pic showed small rust through and patch on driver's floor. Attached Images

02-11-2004, 07:32 PM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	72 cab How's the entire firewall? How about the bottom of the front door pillars's I'm looking for a firewall for my blazer...would this work? No rust please. I need good metal down to the factory weld seam. Inner kick panels? If you still have it, could you send some pic's to my e-mail? Thanks, address: triaddelec@trans-video.net Last edited by vtblazer; 02-11-2004 at 07:35 PM.

02-11-2004, 07:35 PM	#6
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	71 cab I'll Give you $75 for the dash.Dont need or want to pay for the cab to get to me. Also like the 68 grille you have.Make me a deal and ship the two together. John

02-11-2004, 07:37 PM	#7
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	I'm not sure if it would fit your Blazer. Maybe someone else can answer that question. The firewall is solid. I will have to look at the lower door posts to be sure. I can take some pics but it will be tomorrow morning since it is already dark here.

02-11-2004, 07:57 PM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	72 cab From what I understand it will work. Just a little metal surgery to the top/roof. If knowone else has said they'd take it...send me the pic's, please. I'm very interseted in it. Being it's solid and all. Take a pic of where the frame rails wrap up on the firewall while your there, thanks. The seam line also please.

02-12-2004, 01:11 PM	#9
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	The cab sold yesterday. vtblazer- I have another cab that may fit your needs. It is a '68. I will take some pics of it today at lunch. It has a solid firewall all the way to the windshield base. The roof is trashed, but if I am reading correctly the firewall is your interest. olblue- I sold the grill; however I have another 68 grill which has no dents, perfect, including a hood latch, grill stiffener, and lower deflector(attaches to bottom of grill and core support). This grill does not have the trim where the parking lights attach. I am waiting for a response from a board member on this grill, but if he is not interested I'll take $100

02-12-2004, 05:01 PM	#10
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	72 Cab $75 Hi Brian I want to thank you for getting back to me.As far as a grille is concerned. I'm not looking for a necessarly straight or rust free grille.The one on my truck alreadt is.What I need is just the upper opening tray. Someone cut the one in my grille and mounted a pair of fog lights over the turnsignals.Does that make any sence, anyway, the other parts that you offered with your grill arent necessary.I'm mainly after the tray. How about that a/c dash for in the 72 cab? I'll give $75, the price of the whole cab and you will still have the rest to make money with. Thanks Brian! John

02-12-2004, 05:04 PM	#11
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	72 cab OOPS! I hadnt read your reply that was posted above the one sent to me. Just noticed the cab is gone.Thanks anyway Brian John

02-12-2004, 05:10 PM	#12
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Cab is sold already. Sorry. I do have the upper tray from a dented grill. It is not perfect but should serve the purpose. WHAT is the purpose of the upper tray? I'll take $15 + shipping.

02-12-2004, 05:23 PM	#13
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	grille tray WOW! You dont know how hard it has been for me to locate one of these without the grille. This is the part that is riveted to the back of the upper grille opening, usually black,right? You made my day! Heres my zip for shipping 20901 .Thanks Brian! John

02-12-2004, 06:15 PM	#14
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Glad I could help. Can you tell me the purpose of the top one. I know the bottom holds the parking lights. I'll PM you shipping and address.

02-12-2004, 08:18 PM	#15
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	grille Brian I dont really know if there is a purpose other than looks. the one in my truck seems to have no purpose, it just adds some depth to the look of the grille. John

02-18-2004, 07:34 PM	#16
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Did you get my Paypal? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

02-19-2004, 12:22 PM	#17
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Yes. Sent pm.

Register or Log In To remove these advertisements.