My parts truck(SAD SHAPE!!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 02-12-2004, 09:03 PM

I took some pics of the parts truck I am going to use for my sub... Don't laugh, it's the best I could find up here!!!!!

bagged91 · 02-12-2004, 09:05 PM

from the back.... Notice the hatchet chop in the 1/4 panel above the left taillight....

bagged91 · 02-12-2004, 09:08 PM

Complete 1972 402 with A/C intact(compressor is inside truck) and correct 72 mounts and accessories.....

Yes, it does run too

bagged91 · 02-12-2004, 09:10 PM

Complete A/C dash minus the AM/FM that someone stole along with the rear A/C unit...(controls are hanging)

71Rat · 02-12-2004, 09:11 PM

not bad now whats the truck the parts are going into look like?
Best of luck from a fellow jersey boy

Rat

71Rat · 02-12-2004, 09:12 PM

ohh yeah i also know of 2 burbans.... well one i think is a panel truck in north jersey.... they are in better shape then that..... just saying if u need anything i know were 2 are and one is in a junk yard... all hidden and he didn't even know he had it in the corner.

bagged91 · 02-12-2004, 09:18 PM

This 72' isn't too bad considering the parts I will be using off of it to convert my 71 over to a bigblock/auto with the A/C and tinted glass.

Anyone got a lot of ambition? Wanna restore it?

lol

bagged91 · 02-12-2004, 09:20 PM

Here's my 71'...

CPNEJR · 02-12-2004, 09:33 PM

Jese looks like something that you find up here in NH and deffidently what you'd find in Maine

Steven Sellers · 02-12-2004, 09:35 PM

Quote:

Originally posted by bagged91
Complete 1972 402 with A/C intact(compressor is inside truck) and correct 72 mounts and accessories..... Yes, it does run too

Well unless my eyes deceive me that is the fanciest radiator overflow bottle I have ever seen

bagged91 · 02-12-2004, 09:46 PM

Na, that's one of them there new hi tek fuelcells installed by the previous owner.

Gas tank rotted.

Steven Sellers · 02-12-2004, 09:48 PM

Ahhhhh, sorry my mistake but I definetly knew it was HIGH TECH

*rage'nrat638* · 02-12-2004, 09:53 PM

looks like a whole lot of good parts to me $$$$$$$$$$$$$

Blue Beard · 02-12-2004, 10:33 PM

Looks like a good grille.......

How long has it been sitting.......leaves look rather deep.......

dmurphy68 · 02-12-2004, 10:50 PM

Quote:

Originally posted by bagged91
This 72' isn't too bad considering the parts I will be using off of it to convert my 71 over to a bigblock/auto with the A/C and tinted glass.

Anyone got a lot of ambition? Wanna restore it? lol

you could bring it down to the my shop for a full restore. I am always ready for a new project. Give me a call 513-727-8003

bagged91 · 02-12-2004, 11:11 PM

Yeah, the grill is in decent shape. It has a few minor scrapes but would be good for a driver. I am swapping a 68' clip onto my 71' so I won't be using it. From what the p.o. says, the truck hasn't moved from that spot in 12 years. He said he used to start it every spring & fall and check antifreeze before winter.Has good oil pressure & runs cool but smokes a little bit... He was keeping it for the motor but never did anything with it.

I'm actually just using the mounts & accesories with brackets off it. I have a fresh 454/T400 that I am putting in my sub so the 402 will go in dads garage for storage...

It does have a lot of other parts that I am going to use on my 71 also. Worth every penny of the $500.00 too me...

spencra · 02-12-2004, 11:27 PM

quote:

" From what the p.o. says, the truck hasn't moved from that spot in 12 years. "

________________________________________________

I beg to differ. That thing has definately moved in the last 12 years. Yeah, i'd say about about 6 inches down. Give or take a couple.

lukecp · 02-12-2004, 11:31 PM

Lots of good mechanical parts there! I would pay $500 too...especially with a running BB....

71Rat · 02-13-2004, 12:39 AM

what are you doing to the body or is it way past repair?... just wondering

Longhorn Man · 02-13-2004, 01:17 AM

$500 with a running complete stock big block?
Yeah, good deal.
How gutsy are you? You gonna drive it home?

*botboy* · 02-13-2004, 01:34 AM

How are the inner/outer grills on that? Wanna sell em?

What about the front bumper?

bagged91 · 02-13-2004, 03:09 PM

71rat - The body is done. I am stripping it clean and then it goes bye-bye....

longhornman - I could see the line of bodymen following me now!!!

botboy - I am pairing the inner/outer grille with the clip from my 71 in hope's of finding someone to swap me a 67-8 clip for it. The bumpers are trash(bent & rusted).

*botboy* · 02-13-2004, 08:50 PM

Quote:

Originally posted by bagged91
botboy - I am pairing the inner/outer grille with the clip from my 71 in hope's of finding someone to swap me a 67-8 clip for it. The bumpers are trash(bent & rusted).

Sure you don't wanna do a '69 front clip swap? I have those parts available for trade lol...

vtblazer · 02-13-2004, 10:13 PM

Good find, in a yard or private?
Yep, the great north east takes it's toll

At least your saving what's left.
I had to donate my 71 blazer to the bone yard last year

bagged91 · 02-13-2004, 11:36 PM

vtblazer - It was a private seller. Found it while I was working(truck driver). Saw it from the interstate...

How much of the firewall are you looking for on your K5? I know where there is one at in a yard, it's rough but I can take a lookse to see if it's usable. I think the windshield was rotted tho... It may still have the vent windows on it if they are worth anything? No seats(already looked) or much of anything else left.

Ebfabman said that he was going to do a DVD on making a 2wd blazer out of a blazer tub and a pickup cab. Maybe something to look into?

L8R - Joe

02-12-2004, 09:03 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	My parts truck(SAD SHAPE!!) I took some pics of the parts truck I am going to use for my sub... Don't laugh, it's the best I could find up here!!!!! Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:05 PM	#2
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	from the back.... Notice the hatchet chop in the 1/4 panel above the left taillight.... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:08 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Complete 1972 402 with A/C intact(compressor is inside truck) and correct 72 mounts and accessories..... Yes, it does run too Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:10 PM	#4
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Complete A/C dash minus the AM/FM that someone stole along with the rear A/C unit...(controls are hanging) Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:11 PM	#5
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	not bad now whats the truck the parts are going into look like? Best of luck from a fellow jersey boy Rat __________________ Modify everything, leave nothing alone!~

02-12-2004, 09:12 PM	#6
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	ohh yeah i also know of 2 burbans.... well one i think is a panel truck in north jersey.... they are in better shape then that..... just saying if u need anything i know were 2 are and one is in a junk yard... all hidden and he didn't even know he had it in the corner. __________________ Modify everything, leave nothing alone!~

02-12-2004, 09:18 PM	#7
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	This 72' isn't too bad considering the parts I will be using off of it to convert my 71 over to a bigblock/auto with the A/C and tinted glass. Anyone got a lot of ambition? Wanna restore it? lol __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:20 PM	#8
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Here's my 71'... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:33 PM	#9
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Jese looks like something that you find up here in NH and deffidently what you'd find in Maine __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

02-12-2004, 09:46 PM	#11
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Na, that's one of them there new hi tek fuelcells installed by the previous owner. Gas tank rotted. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 09:48 PM	#12
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Ahhhhh, sorry my mistake but I definetly knew it was HIGH TECH __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

02-12-2004, 09:53 PM	#13
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	looks like a whole lot of good parts to me $$$$$$$$$$$$$

02-12-2004, 10:33 PM	#14
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Looks like a good grille....... How long has it been sitting.......leaves look rather deep....... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-12-2004, 11:11 PM	#16
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Yeah, the grill is in decent shape. It has a few minor scrapes but would be good for a driver. I am swapping a 68' clip onto my 71' so I won't be using it. From what the p.o. says, the truck hasn't moved from that spot in 12 years. He said he used to start it every spring & fall and check antifreeze before winter.Has good oil pressure & runs cool but smokes a little bit... He was keeping it for the motor but never did anything with it. I'm actually just using the mounts & accesories with brackets off it. I have a fresh 454/T400 that I am putting in my sub so the 402 will go in dads garage for storage... It does have a lot of other parts that I am going to use on my 71 also. Worth every penny of the $500.00 too me... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-12-2004, 11:27 PM	#17
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	quote: " From what the p.o. says, the truck hasn't moved from that spot in 12 years. " ________________________________________________ I beg to differ. That thing has definately moved in the last 12 years. Yeah, i'd say about about 6 inches down. Give or take a couple. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)



Register or Log In To remove these advertisements.

02-12-2004, 11:31 PM	#18
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Lots of good mechanical parts there! I would pay $500 too...especially with a running BB.... __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

02-13-2004, 12:39 AM	#19
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	what are you doing to the body or is it way past repair?... just wondering __________________ Modify everything, leave nothing alone!~

02-13-2004, 01:17 AM	#20
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	$500 with a running complete stock big block? Yeah, good deal. How gutsy are you? You gonna drive it home?

02-13-2004, 01:34 AM	#21
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	How are the inner/outer grills on that? Wanna sell em? What about the front bumper?

02-13-2004, 03:09 PM	#22
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	71rat - The body is done. I am stripping it clean and then it goes bye-bye.... longhornman - I could see the line of bodymen following me now!!! botboy - I am pairing the inner/outer grille with the clip from my 71 in hope's of finding someone to swap me a 67-8 clip for it. The bumpers are trash(bent & rusted). __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-13-2004, 10:13 PM	#24
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Parts Burb Good find, in a yard or private? Yep, the great north east takes it's toll At least your saving what's left. I had to donate my 71 blazer to the bone yard last year

02-13-2004, 11:36 PM	#25
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	vtblazer - It was a private seller. Found it while I was working(truck driver). Saw it from the interstate... How much of the firewall are you looking for on your K5? I know where there is one at in a yard, it's rough but I can take a lookse to see if it's usable. I think the windshield was rotted tho... It may still have the vent windows on it if they are worth anything? No seats(already looked) or much of anything else left. Ebfabman said that he was going to do a DVD on making a 2wd blazer out of a blazer tub and a pickup cab. Maybe something to look into? L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

Register or Log In To remove these advertisements.