I need a set of these valve covers!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 02-18-2004, 05:13 PM

I need a set of these valve covers that have the hole in them for oil. Any shape as long as they are not cracked or warped, I can bead blast them and repaint. Thanks, .....Jerry

Bamm · 02-18-2004, 05:13 PM

Maybe it would help if I attached the picture???? Doh!!!!

Burnsman · 02-18-2004, 05:28 PM

Are you selling the ones in the picture? If so, let me know. Thanks! Brian

Bamm · 02-18-2004, 06:24 PM

No, I got this picture off of ebay. Just do a search for cal custom and these should come up. Still looking for a pair with the oil holes.

HuggerCST · 02-18-2004, 06:28 PM

I have a set like the ones pictured that I would sell. One fin has a chipped place though. I don't know what they are worth, I guess make me an offer if you are interested.

Bamm · 02-18-2004, 06:34 PM

Hugger - pm sent.......

Blue Beard · 02-19-2004, 12:03 AM

In the process of moving, but somewhere in the shop is a set of those.....

superchevy · 02-19-2004, 01:42 AM

Those didn't come with oil filler holes. Those are late 50's early 60's staggered bolt valvecovers. The oilfill/breather on those smallblocks was in the oil fill tube at the front of the motor. That's why you see so many of those Cal-Custom covers with side-mounted "elbow" breathers from Eelco, Moon, or Offy. I have a set of these being powdercoated right now, and will mount some Moon elbow breathers to them.
SC

Tx Firefighter · 02-19-2004, 10:11 AM

I have a set of Cal Custom valve covers with the oil fill holes, but the fins are somewhat thinner than the ones in that picture.

50 bucks. I can supply pictures if you're interested.

Bamm · 02-19-2004, 10:24 AM

I appreciate it Tx Firefighter, but thats a little steep for me right now. To be honest, I priced new ones at the Super Chevy Show last fall for $60. I plan on going to the Autofair in Charlotte in April. I hope to find a decent, cheap set there, if someone doesn't come up with a set here. Superchevy You're right those are offset covers. I just want a set that is finned just like that, with the oil hole for a small block chevy. Thanks guys for your help........Jerry

da-burb · 02-19-2004, 10:35 AM

The only valve covers I have seen with breathers or oil fill holes in like those have been home altered jobs.

superchevy · 02-19-2004, 11:16 AM

It's hard to find a good pair of the early style Cal Customs, with the late straight across bolt pattern, that have not had the fins ground down for alternator clearance. Or not pitted or cracked. You'll see them sell on eBay for good money.
I've found it hard to get a good deal on swapmeet stuff anymore as everyone seems to be internet hooked-up, and they know what they can get on eBay for their stuff. Get there early and find someone who doesn't know what they have.
SC

Bamm · 02-19-2004, 11:31 AM

Yeah, you're right SuperChevy. You can find some stuff at swap meets, but it's getting harder to find really good deals. While a lot of people are dealing internet-wise now, I still think that being able to work with someone face-to-face and being able to put cash in their hand right then still has it's advantages. How many times have you "sold" a part online and then after waiting for the cash for a week or so, the buyer backs out. Just my thoughts on it. If need be, I will just buy a new set. There is a company out there now that is reproducing them in a polished aluminum for around $60-65. I saw them at the Super Chevy Show in Va last year, just didn't have the cash to throw at them right then. I'm hoping to come across somene on here that has an old set in their garage, and they don't mind giving me a deal on. Thanks, guys.......Jerry

Bamm · 02-19-2004, 03:22 PM

ttt

trinic · 02-19-2004, 03:42 PM

$60-$65??
Sounds pretty cheap too me.

HuggerCST · 02-19-2004, 05:15 PM

Here are the pics of mine. Both covers have a chipped place. The bolt holes are not offset.

HuggerCST · 02-19-2004, 05:20 PM

2

*72longbed* · 02-19-2004, 05:22 PM

I had an original pair of Offenhouser's with an oil fill on the top of one. They were powder coated bright silver, sold them at one of my yard sales for $100.00. The buyer was happy to get them at that price.

72longbed

71swb4x4 · 02-19-2004, 05:30 PM

I may have a set, I will check when I get home.

Shawn

mainman22 · 02-21-2004, 04:20 AM

i have a set of offset ones for 60 plus shipping ill get pics if ayone is intersted

dinnut · 02-23-2004, 10:40 PM

im interested in pics of the ones mainman22 has. these will fit the 350s like in our trucks right? they have the oil fill hole?

Bamm · 02-24-2004, 12:00 AM

I think the offset ones are for 55-57 heads, can anyone else verify the years that the "offset" ones will fit?

dinnut · 02-24-2004, 12:07 AM

oh then nevermind

Solver · 02-24-2004, 02:07 AM

These are not for sale but wanted to put up picture if this is what you are looking for.Not even sure of the brand on these but they are the finned aluminum with the oil holes

bpmcgee · 02-24-2004, 02:16 AM

Two thoughts:

First, '70s corvettes (I know at least 75 L82s) had finned polished aluminum valve covers with the correct number of holes.

Second, Edelbrock sells polished cast aluminum covers with 2 holes as well. They are SWEET -- I just bought a pair for my Vortec heads.

Brian

02-18-2004, 05:13 PM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I need a set of these valve covers!!! I need a set of these valve covers that have the hole in them for oil. Any shape as long as they are not cracked or warped, I can bead blast them and repaint. Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 05:13 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Maybe it would help if I attached the picture???? Doh!!!! Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 05:28 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	valve covers Are you selling the ones in the picture? If so, let me know. Thanks! Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

02-18-2004, 06:24 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	No, I got this picture off of ebay. Just do a search for cal custom and these should come up. Still looking for a pair with the oil holes. __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-18-2004, 06:28 PM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I have a set like the ones pictured that I would sell. One fin has a chipped place though. I don't know what they are worth, I guess make me an offer if you are interested. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-18-2004, 06:34 PM	#6
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Hugger - pm sent....... __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 12:03 AM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	In the process of moving, but somewhere in the shop is a set of those..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-19-2004, 01:42 AM	#8
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Those didn't come with oil filler holes. Those are late 50's early 60's staggered bolt valvecovers. The oilfill/breather on those smallblocks was in the oil fill tube at the front of the motor. That's why you see so many of those Cal-Custom covers with side-mounted "elbow" breathers from Eelco, Moon, or Offy. I have a set of these being powdercoated right now, and will mount some Moon elbow breathers to them. SC

02-19-2004, 10:11 AM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I have a set of Cal Custom valve covers with the oil fill holes, but the fins are somewhat thinner than the ones in that picture. 50 bucks. I can supply pictures if you're interested. __________________ I'm on the Instagram- @Gearhead_Kevin

02-19-2004, 10:24 AM	#10
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I appreciate it Tx Firefighter, but thats a little steep for me right now. To be honest, I priced new ones at the Super Chevy Show last fall for $60. I plan on going to the Autofair in Charlotte in April. I hope to find a decent, cheap set there, if someone doesn't come up with a set here. Superchevy You're right those are offset covers. I just want a set that is finned just like that, with the oil hole for a small block chevy. Thanks guys for your help........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 10:35 AM	#11
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	The only valve covers I have seen with breathers or oil fill holes in like those have been home altered jobs. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

02-19-2004, 11:16 AM	#12
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	It's hard to find a good pair of the early style Cal Customs, with the late straight across bolt pattern, that have not had the fins ground down for alternator clearance. Or not pitted or cracked. You'll see them sell on eBay for good money. I've found it hard to get a good deal on swapmeet stuff anymore as everyone seems to be internet hooked-up, and they know what they can get on eBay for their stuff. Get there early and find someone who doesn't know what they have. SC

02-19-2004, 11:31 AM	#13
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Yeah, you're right SuperChevy. You can find some stuff at swap meets, but it's getting harder to find really good deals. While a lot of people are dealing internet-wise now, I still think that being able to work with someone face-to-face and being able to put cash in their hand right then still has it's advantages. How many times have you "sold" a part online and then after waiting for the cash for a week or so, the buyer backs out. Just my thoughts on it. If need be, I will just buy a new set. There is a company out there now that is reproducing them in a polished aluminum for around $60-65. I saw them at the Super Chevy Show in Va last year, just didn't have the cash to throw at them right then. I'm hoping to come across somene on here that has an old set in their garage, and they don't mind giving me a deal on. Thanks, guys.......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 03:22 PM	#14
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	ttt __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-19-2004, 03:42 PM	#15
trinic Registered User Join Date: Aug 2002 Location: Wide awake Wylie (North Texas) Posts: 322	.. $60-$65?? Sounds pretty cheap too me.



Register or Log In To remove these advertisements.

02-19-2004, 05:15 PM	#16
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Here are the pics of mine. Both covers have a chipped place. The bolt holes are not offset. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-19-2004, 05:20 PM	#17
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	2 Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-19-2004, 05:22 PM	#18
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	I had an original pair of Offenhouser's with an oil fill on the top of one. They were powder coated bright silver, sold them at one of my yard sales for $100.00. The buyer was happy to get them at that price. 72longbed

02-19-2004, 05:30 PM	#19
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I may have a set, I will check when I get home. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-21-2004, 04:20 AM	#20
mainman22 Registered User Join Date: Feb 2001 Location: bend,oregon USA Posts: 90	i have a set of the offset ones i have a set of offset ones for 60 plus shipping ill get pics if ayone is intersted

02-23-2004, 10:40 PM	#21
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	im interested in pics of the ones mainman22 has. these will fit the 350s like in our trucks right? they have the oil fill hole? __________________ 70 longbed 496/th400/Ford 9"

02-24-2004, 12:00 AM	#22
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I think the offset ones are for 55-57 heads, can anyone else verify the years that the "offset" ones will fit? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-24-2004, 12:07 AM	#23
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	oh then nevermind __________________ 70 longbed 496/th400/Ford 9"

02-24-2004, 02:07 AM	#24
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	These are not for sale but wanted to put up picture if this is what you are looking for.Not even sure of the brand on these but they are the finned aluminum with the oil holes Attached Images __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

02-24-2004, 02:16 AM	#25
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Two thoughts: First, '70s corvettes (I know at least 75 L82s) had finned polished aluminum valve covers with the correct number of holes. Second, Edelbrock sells polished cast aluminum covers with 2 holes as well. They are SWEET -- I just bought a pair for my Vortec heads. Brian

Register or Log In To remove these advertisements.