Is 2nd row sub seat same size as truck bench? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 02-18-2004, 10:30 PM

Can anyone tell me if a second row seat from a suburban would work as a front seat in a pickup? Just bought one on ebay and need to know if this will work in my truck.

Any info is appreciated.

Thanks.

**ScottH** · 02-18-2004, 11:15 PM

ttt

teeitup · 02-18-2004, 11:51 PM

I got one sitting out there Scott, I'm pretty sure its narrower.

**ScottH** · 02-19-2004, 12:06 AM

Randy, any chance you can measure it for me?

Thanks!

bagged91 · 02-19-2004, 12:10 AM

I would have to say no. If it is the full width 2nd row seat(models with no 3rd seat) then it should be the same width as the front seats but it doesn't fold and I'm not sure if the seat itself will accept the tracks from a p/u seat. I can go out & look at mine better tommorrow if you like and take some pics for you.

Joe

**ScottH** · 02-19-2004, 12:27 AM

Joe,

Thanks a bunch for any assist. The pic shows what looks like a full size bench, no arm rests, etc., but of course measurements would be the best way to tell. Of course the brackets are another issue......

Scott

bagged91 · 02-19-2004, 12:41 AM

Hey Scott,
Just went out and measured the seat...

Frame is approx. 58-59" wide and 18-19" deep. The Suburban mounts for the floor do unbolt and should easily accept the front tracks. The only thing you may not like is the holes in the upholstery from where the armrests mount.

Let me know if you need any other measurements, ect...

L8R - Joe

**ScottH** · 02-19-2004, 10:52 AM

Joe,

Thanks for the assist on the measurements. Any idea of how that compares to a truck bench (mine is under wraps presently)?
This seat did not have any arm rests, so no holes to worry about fortunately.

Thanks again.

Scott

Dan72cst · 02-19-2004, 10:58 AM

I bought my burb with only the front buckets in it, but purchased all three bench seats out of "71Submans" burb and the middle and third seat are 50 inches wide and the same as the blazer rear seats. Middle seat installs offset to center for passage to the third seat. ?????? I was assuming this was original?

**CPNE** · 02-19-2004, 11:06 AM

Quote:

Originally posted by Dan72cst
I bought my burb with only the front buckets in it, but purchased all three bench seats out of "71Submans" burb and the middle and third seat are 50 inches wide and the same as the blazer rear seats. Middle seat installs offset to center for passage to the third seat. ?????? I was assuming this was original?

There are 2 types of second row seats. Dan72cst, the ones you describe are correct when the optional 3rd row was included. The type bagged91 measured is the seat you got when the 3rd row seating wasn't included. It is wider becuase there is no need for access to 3rd row seat. Both types have armrests. Hope this clears things up for you.

bagged91 · 02-19-2004, 08:52 PM

Scott,
I believe that seat is the same width as the stock front bench(my front seat is out and over my dads so I can't check).

CPNE,
Exactly what I was gonna say!

L8R - Joe

**ScottH** · 02-19-2004, 09:52 PM

Thanks to everyone for their great help.

02-18-2004, 10:30 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Help - Is 2nd row sub seat same size as truck bench??? Can anyone tell me if a second row seat from a suburban would work as a front seat in a pickup? Just bought one on ebay and need to know if this will work in my truck. Any info is appreciated. Thanks. Last edited by ScottH; 02-18-2004 at 11:14 PM.

02-18-2004, 11:51 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got one sitting out there Scott, I'm pretty sure its narrower. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2004, 12:10 AM	#5
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I would have to say no. If it is the full width 2nd row seat(models with no 3rd seat) then it should be the same width as the front seats but it doesn't fold and I'm not sure if the seat itself will accept the tracks from a p/u seat. I can go out & look at mine better tommorrow if you like and take some pics for you. Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-19-2004, 12:41 AM	#7
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Hey Scott, Just went out and measured the seat... Frame is approx. 58-59" wide and 18-19" deep. The Suburban mounts for the floor do unbolt and should easily accept the front tracks. The only thing you may not like is the holes in the upholstery from where the armrests mount. Let me know if you need any other measurements, ect... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-19-2004, 10:58 AM	#9
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	I bought my burb with only the front buckets in it, but purchased all three bench seats out of "71Submans" burb and the middle and third seat are 50 inches wide and the same as the blazer rear seats. Middle seat installs offset to center for passage to the third seat. ?????? I was assuming this was original? __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

02-18-2004, 11:15 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	ttt

02-19-2004, 12:06 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Randy, any chance you can measure it for me? Thanks!

02-19-2004, 12:27 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Joe, Thanks a bunch for any assist. The pic shows what looks like a full size bench, no arm rests, etc., but of course measurements would be the best way to tell. Of course the brackets are another issue...... Scott

02-19-2004, 10:52 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Joe, Thanks for the assist on the measurements. Any idea of how that compares to a truck bench (mine is under wraps presently)? This seat did not have any arm rests, so no holes to worry about fortunately. Thanks again. Scott

02-19-2004, 08:52 PM	#11
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Scott, I believe that seat is the same width as the stock front bench(my front seat is out and over my dads so I can't check). CPNE, Exactly what I was gonna say! L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

02-19-2004, 09:52 PM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Thanks to everyone for their great help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.