WTB These Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10stepside · 02-20-2004, 01:45 AM

I know i can buy this new, but why buy new when used will do right?

I need the ignition switch.. the part that the ignition cylinder goes in, I also need the spacer part that goes infront of it, part that hits the dash. --- not any more thanks JT/stelth2002

A/c defector balls in good shape + the housings also a good center vent that is in good shape. --- Jerry/Bamm 24 is checking his stock of stuff for me on these

Good condition black chevy horn button.

Maybe a good pass inner fender ~

Tell me what all of this you have and what you want. I have paypal

Thanks

stelth2002 · 02-20-2004, 03:39 AM

you have a pm

Bamm · 02-20-2004, 11:55 AM

Frank - pm sent..........Jerry

billsbowtie · 02-20-2004, 09:09 PM

have you found the air stuff yet if not let me no also ing.switch thanks bill

Big · 02-20-2004, 10:20 PM

Go to napa and buy the ignition switch thats where I got my replacement one for my 72 GMC when I lost the key.

Hutch · 02-20-2004, 10:39 PM

69c10stepside
There was a post a while back about someone that found that you could use metal balls from older cars in the air vents of your truck.
They were in 70's oldsmobiles or buicks or one of the big older sedans.
They stated that they were an exact fit and appeared to be the same design just made of metal, and they were chrome also.

69c10stepside · 02-21-2004, 03:07 AM

Quote:

Originally posted by billsbowtie
have you found the air stuff yet if not let me no also ing.switch thanks bill

Jt is going to be sending me all of the ignition parts I need, and Jerry is going to be checking on the a/c stuff for me sometime toda (saturday) i will be for sure to post on here if it went through or not.

Big, I needed the whole assembly, I lost everything I had for my truck

I have an ignition clyinder on order, but .. that is ok too

Hutch, thanks for the reply, I dont know of any cars to fit that around my parts.

junkyardjohn · 02-21-2004, 03:45 PM

HUTCH -- THAT WAS ME SHARING THE IDEA OF STEEL A/C BALLS. I'VE FOUND EM IN 62 -63 OLDS & BUICK 225s. G.M. SURE PUT SOME GOOD CHROME ON THEM, CAUSE THEY STILL LOOK GREAT AFTER 40 YEARS. SURE BEATS THE H@LL OUT OF THE EL-CHEAPO PLASTIC REPOP. BALLS THAT YOU CAN BUY NOW.

JOHN

02-20-2004, 01:45 AM	#1
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	WTB These Parts I know i can buy this new, but why buy new when used will do right? I need the ignition switch.. the part that the ignition cylinder goes in, I also need the spacer part that goes infront of it, part that hits the dash. --- not any more thanks JT/stelth2002 A/c defector balls in good shape + the housings also a good center vent that is in good shape. --- Jerry/Bamm 24 is checking his stock of stuff for me on these Good condition black chevy horn button. Maybe a good pass inner fender ~ Tell me what all of this you have and what you want. I have paypal Thanks __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold Last edited by 69c10stepside; 02-20-2004 at 03:21 PM.

02-20-2004, 03:39 AM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	you have a pm __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-20-2004, 11:55 AM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Frank - pm sent..........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

02-20-2004, 09:09 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	have you found the air stuff yet if not let me no also ing.switch thanks bill __________________ i have 67/72 chevy truck parts f/s.

02-20-2004, 10:39 PM	#6
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	69c10stepside There was a post a while back about someone that found that you could use metal balls from older cars in the air vents of your truck. They were in 70's oldsmobiles or buicks or one of the big older sedans. They stated that they were an exact fit and appeared to be the same design just made of metal, and they were chrome also. __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

02-20-2004, 10:20 PM	#5
Big Registered User Join Date: Feb 2004 Location: Lakehurst, NJ Posts: 42	Go to napa and buy the ignition switch thats where I got my replacement one for my 72 GMC when I lost the key.

02-21-2004, 03:45 PM	#8
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	HUTCH -- THAT WAS ME SHARING THE IDEA OF STEEL A/C BALLS. I'VE FOUND EM IN 62 -63 OLDS & BUICK 225s. G.M. SURE PUT SOME GOOD CHROME ON THEM, CAUSE THEY STILL LOOK GREAT AFTER 40 YEARS. SURE BEATS THE H@LL OUT OF THE EL-CHEAPO PLASTIC REPOP. BALLS THAT YOU CAN BUY NOW. JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.