Need a board member in the Haver or Great Falls area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MeannGrumpy · 02-24-2004, 08:54 PM

Hi folks;In my search to find new Axles for my truck Crazy Cooter put me on to Randy's Ring & Pinion. These folks have what I need BUT They do not ship international due to parts numbers and billing things that governments like. Even UPS and the like have to have that stuff that Randy's does not provide. Would like to know if there are any board members around Haver Montan or Great Falls even I could use as a shipping drop and come down to pick up my parts and have a visit.

stelth2002 · 02-24-2004, 09:08 PM

Im in moscow id. Id be happy to help

MeannGrumpy · 02-25-2004, 02:32 AM

Hi Stealth; Moscow is a little too far, probably 6 hours one way. Sure appreciate the offer though. Hope Another board member closer to the Alberta Border will get in touch with me, we'll see.

breeh · 02-25-2004, 02:57 AM

I have a set of axles (axles plus stub shafts) that would probably work for you. They are from a 69 3/4 ton open knuckle drum brake truck (D44) although I think that the disc brake trucks use the same axles. We could probably ship these through the postal service and save you some hastle. I would take $100.00 USD plus shipping if interested.

Mechanic · 02-25-2004, 02:58 AM

I wish it were summer time. I'd just load up and bring it over and go camping. Randy's does my Dana 70 work. Would they put it on will call and let me pick it up and send it to you UPS? Is there some kind of a problem shipping axles from USA to Canada??? Let me know if you need some assistance....Tom

Russell · 02-25-2004, 03:15 AM

Unfortunately I'm a bit too far north, lol

I'm sure there are a couple of guys down in Montana that can help you out

Mechanic · 02-25-2004, 03:46 AM

Another thought is to pay your local Haver or Great Falls NAPA dealer have these thing brought over from Randy's or the Everett, WA, NAPA store...

fast67chevy2002 · 02-25-2004, 01:00 PM

There is a junkyard right outside of Cutbank that has several of our year of truck, or even Shelby, they are south of Milk River, I have gotten several parts from there in the past. (just a thought)

MeannGrumpy · 02-25-2004, 08:48 PM

Cutbank would be perfect, however I would prefer to use the new axles and I do not know anyone there either that might let me use their address as a shipping drop.
Thanks Rick

MeannGrumpy · 02-25-2004, 10:24 PM

Greetings Mechanic; That is a gerat suggestion, Tomorrow I will find a Haver phone book and see if I can do something through them. From the sounds of it I am getting the impression that they may be a dealer for Randy,s . That would be perfect. Only a hour and half drive down and might not even have to declare parts coming back, this could work.

MeannGrumpy · 02-26-2004, 08:50 PM

Thanks to all who got involved in my axle delema. I got Randy,s Ring and Pinion to ship to the Napa Dealer in Haver ( Bob ) who graciously ofered to let me use his store as a shipping drop so next Friday I should be able to slip down and pick up my axles. The guys at Randy,s are really helpful and know their stuff so I will recamend them to you all and if any of you feel the need to come this way please drop in
MeannGrumpy

Maximum Overdrive · 02-26-2004, 09:01 PM

Guess I'm late on this as I just now seen your post so it wont be much help now but I'm in the Great Falls area.

Anyway it looks like you got it solved.

02-24-2004, 08:54 PM	#1
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Need a board member in the Haver or Great Falls area Hi folks;In my search to find new Axles for my truck Crazy Cooter put me on to Randy's Ring & Pinion. These folks have what I need BUT They do not ship international due to parts numbers and billing things that governments like. Even UPS and the like have to have that stuff that Randy's does not provide. Would like to know if there are any board members around Haver Montan or Great Falls even I could use as a shipping drop and come down to pick up my parts and have a visit. __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-24-2004, 09:08 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Im in moscow id. Id be happy to help __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-25-2004, 02:32 AM	#3
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Boarder friends Hi Stealth; Moscow is a little too far, probably 6 hours one way. Sure appreciate the offer though. Hope Another board member closer to the Alberta Border will get in touch with me, we'll see. __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-25-2004, 02:57 AM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I have a set of axles (axles plus stub shafts) that would probably work for you. They are from a 69 3/4 ton open knuckle drum brake truck (D44) although I think that the disc brake trucks use the same axles. We could probably ship these through the postal service and save you some hastle. I would take $100.00 USD plus shipping if interested. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

02-25-2004, 02:58 AM	#5
Mechanic Registered User Join Date: Jun 2003 Location: Seattle Posts: 77	I wish it were summer time. I'd just load up and bring it over and go camping. Randy's does my Dana 70 work. Would they put it on will call and let me pick it up and send it to you UPS? Is there some kind of a problem shipping axles from USA to Canada??? Let me know if you need some assistance....Tom __________________ Shop Labor $75, if you watch $100, if you help $125, Wisecracks-$25, Boxjobs-don't even think about it. Yes,Cash.

02-25-2004, 03:15 AM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Unfortunately I'm a bit too far north, lol I'm sure there are a couple of guys down in Montana that can help you out __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-25-2004, 03:46 AM	#7
Mechanic Registered User Join Date: Jun 2003 Location: Seattle Posts: 77	Another thought is to pay your local Haver or Great Falls NAPA dealer have these thing brought over from Randy's or the Everett, WA, NAPA store... __________________ Shop Labor $75, if you watch $100, if you help $125, Wisecracks-$25, Boxjobs-don't even think about it. Yes,Cash.

02-25-2004, 01:00 PM	#8
fast67chevy2002 Dad's little helper Join Date: Apr 2003 Location: Helena, MT Posts: 194	Is Cutbank to far? There is a junkyard right outside of Cutbank that has several of our year of truck, or even Shelby, they are south of Milk River, I have gotten several parts from there in the past. (just a thought) __________________ too many projects: 61 biscane 67 swb(shaved) 73 Fiat spider 124 Sport 84 Pontiac Grand Prix 86 olds cut. sup.

02-25-2004, 08:48 PM	#9
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Cutbank Cutbank would be perfect, however I would prefer to use the new axles and I do not know anyone there either that might let me use their address as a shipping drop. Thanks Rick __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-25-2004, 10:24 PM	#10
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Axles, Haver NAPA dealer Greetings Mechanic; That is a gerat suggestion, Tomorrow I will find a Haver phone book and see if I can do something through them. From the sounds of it I am getting the impression that they may be a dealer for Randy,s . That would be perfect. Only a hour and half drive down and might not even have to declare parts coming back, this could work. __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-26-2004, 08:50 PM	#11
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	Axle problem solved Thanks to all who got involved in my axle delema. I got Randy,s Ring and Pinion to ship to the Napa Dealer in Haver ( Bob ) who graciously ofered to let me use his store as a shipping drop so next Friday I should be able to slip down and pick up my axles. The guys at Randy,s are really helpful and know their stuff so I will recamend them to you all and if any of you feel the need to come this way please drop in MeannGrumpy __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

02-26-2004, 09:01 PM	#12
Maximum Overdrive December 21, 2012 Join Date: Apr 2000 Location: Black Eagle, Montana Posts: 1,633	Guess I'm late on this as I just now seen your post so it wont be much help now but I'm in the Great Falls area. Anyway it looks like you got it solved. __________________ *"!Ama Sua, Ama Kjella, Ama Lllulla!"*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.