drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72afr** · 02-27-2004, 12:54 AM

i was wondering if you guys(and gals) have a recommendation as to where i should get my drop spindles from

thanks for any help
72afr

71Rat · 02-27-2004, 01:11 AM

I have ECE drop spindles on my pickup. i like them a lot, when i was doing my suspension i asked around and everyone said that if you go more then 2 inches you should use drop spindles for the alingment problem. you can click on my web site bellow, my truck has a 2.5/4 drop to it. best of luck

Rat

Chevy Wrench · 02-27-2004, 01:20 AM

I have the Mike McGaughy's drop spindles for my 67'. Very good quality and they use stock components. I have always tried to support the "little guys". Plus, McGaughy's manufacture their own products, so you dont have any middle man to deal with.

**72afr** · 02-27-2004, 01:24 AM

thanks rat, i really like the look of the 2.5/4, i might have to copy that if you dont mind, and the gto looks sweet

thanks again
72afr

**72afr** · 02-27-2004, 01:36 AM

hey chevy wrench, does mike mcgauphy's have a web site?

02-27-2004, 12:54 AM	#1
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 281	drop spindles i was wondering if you guys(and gals) have a recommendation as to where i should get my drop spindles from thanks for any help 72afr __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

02-27-2004, 01:11 AM	#2
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	I have ECE drop spindles on my pickup. i like them a lot, when i was doing my suspension i asked around and everyone said that if you go more then 2 inches you should use drop spindles for the alingment problem. you can click on my web site bellow, my truck has a 2.5/4 drop to it. best of luck Rat __________________ Modify everything, leave nothing alone!~

02-27-2004, 01:20 AM	#3
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	I have the Mike McGaughy's drop spindles for my 67'. Very good quality and they use stock components. I have always tried to support the "little guys". Plus, McGaughy's manufacture their own products, so you dont have any middle man to deal with. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

02-27-2004, 01:24 AM	#4
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 281	thanks rat, i really like the look of the 2.5/4, i might have to copy that if you dont mind, and the gto looks sweet thanks again 72afr __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

02-27-2004, 01:36 AM	#5
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 281	hey chevy wrench, does mike mcgauphy's have a web site? __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.