Braided Brake Lines - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Smitty** · 03-06-2004, 04:33 PM

Who has them and ? cost for '71?

Mudder · 03-06-2004, 08:48 PM

I have them on my 4x4 and thinking the rear was around 90 bucks. Can't remember what the front ones cost. Mine are longer than yours will have to be and this was about 8 years ago..... Lot of help arent I?

lost wages · 03-06-2004, 09:49 PM

i got them from inline tube, im as much help as randy cause i think they were around 150 for the set of three.

boraxman · 03-06-2004, 11:32 PM

If you decide to go rubber instead, I have a new pair of '71 c10 front hoses $30 shipped.

74KDD · 03-06-2004, 11:36 PM

Hello,

This is my FIRST time using this Board.
I've been reading you guys for several months.

Anyways ... back to the topic ...

I purchased stainless steel braided brake lines for my 1970 GMC, including everything from the master cylinder to each of the wheel cylinders (or to those little hydralic hoses that are real close in the front). Total cost - (kind of ashamed) but I paid $350 for all of them.

They do look real cool ... and I'm sure they'll never rust ... but sometimes I think $350 was a bit much.

boraxman · 03-06-2004, 11:43 PM

Quote:

Originally posted by 74KDD
Hello,

This is my FIRST time using this Board.
I've been reading you guys for several months.

Anyways ... back to the topic ...

I purchased stainless steel braided brake lines for my 1970 GMC, including everything from the master cylinder to each of the wheel cylinders (or to those little hydralic hoses that are real close in the front). Total cost - (kind of ashamed) but I paid $350 for all of them.

They do look real cool ... and I'm sure they'll never rust ... but sometimes I think $350 was a bit much.

Welcome to the board...if $350 included everything between the braided lines thats actually in line. I spent about that on mine.

**FRENCHBLUE72** · 03-07-2004, 12:11 PM

Summit racing has them in stock I bought a set for my blazer not too long ago... Look's like they run about 95 buck's it's not listed in there newest catalog but you could call them at 1-800-230-3030

gonebad2 · 03-07-2004, 04:02 PM

Got a set at Summit in Reno yesterday. They have them in stock.

dinnut · 03-07-2004, 08:25 PM

just make sure you dont get the "slotted" ones

71chevyfan · 03-13-2004, 02:16 AM

First time on this board, and I hope you find what you need.

**Smitty** · 03-13-2004, 07:11 PM

Thanks for the response. I ordereda set last weekend at Pamona from CPP Classic Performance Products for $45 a pair. Looked in their Catalog and they were listed at $65. Still waiting for delivery. Should be here Monday. (www.classicperfom.com) had some interesting stuff in their catalog. Thanks again.

Smitty

heldonss · 03-13-2004, 10:21 PM

Quote:

Originally posted by Smitty
Thanks for the response. I ordereda set last weekend at Pamona from CPP Classic Performance Products for $45 a pair. Looked in their Catalog and they were listed at $65. Still waiting for delivery. Should be here Monday. (www.classicperfom.com) had some interesting stuff in their catalog. Thanks again.

Smitty

That is were mine came from too....no problems.

heldonss · 03-13-2004, 10:24 PM

here

03-06-2004, 04:33 PM	#1
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,109	Braided Brake Lines Who has them and ? cost for '71? __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

03-06-2004, 11:32 PM	#4
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	If you decide to go rubber instead, I have a new pair of '71 c10 front hoses $30 shipped. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

03-06-2004, 11:36 PM	#5
74KDD Registered User Join Date: Mar 2004 Location: Clearwater, FL Posts: 13	Hello, This is my FIRST time using this Board. I've been reading you guys for several months. Anyways ... back to the topic ... I purchased stainless steel braided brake lines for my 1970 GMC, including everything from the master cylinder to each of the wheel cylinders (or to those little hydralic hoses that are real close in the front). Total cost - (kind of ashamed) but I paid $350 for all of them. They do look real cool ... and I'm sure they'll never rust ... but sometimes I think $350 was a bit much. __________________ KDD

03-07-2004, 12:11 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,600	Summit racing has them in stock I bought a set for my blazer not too long ago... Look's like they run about 95 buck's it's not listed in there newest catalog but you could call them at 1-800-230-3030 __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-07-2004, 04:02 PM	#8
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Got a set at Summit in Reno yesterday. They have them in stock. __________________ Your Bought And Sold....I Got Your Soul!

03-06-2004, 08:48 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I have them on my 4x4 and thinking the rear was around 90 bucks. Can't remember what the front ones cost. Mine are longer than yours will have to be and this was about 8 years ago..... Lot of help arent I?

03-06-2004, 09:49 PM	#3
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	i got them from inline tube, im as much help as randy cause i think they were around 150 for the set of three.

03-07-2004, 08:25 PM	#9
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	just make sure you dont get the "slotted" ones __________________ 70 longbed 496/th400/Ford 9"

03-13-2004, 02:16 AM	#10
71chevyfan Registered User Join Date: Mar 2004 Posts: 1	1st tiem on this board First time on this board, and I hope you find what you need.

03-13-2004, 07:11 PM	#11
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,109	Thanks for the response. I ordereda set last weekend at Pamona from CPP Classic Performance Products for $45 a pair. Looked in their Catalog and they were listed at $65. Still waiting for delivery. Should be here Monday. (www.classicperfom.com) had some interesting stuff in their catalog. Thanks again. Smitty __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

03-13-2004, 10:24 PM	#13
heldonss Registered User Join Date: Sep 2002 Location: SEMO Posts: 74	bigger shot here Attached Images __________________ Current rides: 2007 Silverado VortecMax 1500 2007 Silverado Classic 1500 2004 GTO, 6spd 2003 Silverado 3500, 8.1 w/ Allison 2002 Camaro SS, 35th Ann., 6spd 2002 Silverado 2500, 6.0 1999 Buick Regal GS, 3800 SC 1997 Camaro Z28, 30th Ann. convertible 1991 GMC Syclone, #170 of 2998 1990 454 SS, 26,000 miles 1987 GMC 3500 Box Van 1972 Chevy C-10 short bed 1970 GMC Sierra Grande..2 owner 1968 Camaro RS/SS, 396/375 HP 1967 Chevy II Nova 1967 Camaro Convertible 1957 Chevy Truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.