|
03-10-2004, 09:44 PM
|
#1 |
|
City's Articulation Ramp
Join Date: Jan 2004
Location: St. Louis Missouri
Posts: 452
|
Rear Cab Panel?
I started stripping the rear cab wall on my 69 swb tonight and realized it was beat to hell. There was bondo nearly from the drivers side b pillar to passenger side b pillar. Some of it was 1/4 thick or more. Mostly around the top of the window to the roof, looks like it was caused by ladders or such. Now for my question, does anyone sell the complete panel; door jamb to door jamb, 6 inches above the rear window on the seam down to the cab corners? It would save me SO much headache to just replace it. It seems simple and realistic, drill out the spot welds on the door jambs, on roll the drip rail (shaving that anyway), drill out spot welds on the window inlay, and cut along the seam on the back roof. And it they don't reproduce this, does anyone have a cab they would shred for lil' ol' me?
Thanks guys, Joe 
|
|
|
|
03-10-2004, 10:01 PM
|
#2 |
|
FUEL CELL GURU
Join Date: Aug 2003
Location: Mineola, Texas
Posts: 993
|
Where....
are you located? I have a cab that has a good back panel. CHEAP!
|
|
|
|
|
03-10-2004, 10:01 PM
|
#3 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Where are you located?
Shipping would be a major consideration on a large part like you need. Jim |
|
|
|
|
03-10-2004, 10:40 PM
|
#4 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
hate to be a me too, but i have one i could let you have for $150, floor sucks but the back is good
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
