23+ 67-72 pu's parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*tnchev* · 03-15-2004, 04:09 PM

Hey neighbors, I guess my first thread didn' get anyone up. As the subject says. also i have two large sheds full of parts. Parts run from bare short frames to complete trucks. What I don' have at the minute (but will soon) is tach clusters, am/fm or bucket interiors. Any real interest out there? I will of course be in charlotte, green field LG+MG 51+52. Come back! tnchev (east tn)

1972ChevyGuy · 03-15-2004, 04:35 PM

How much do you want for a 67-72 swb rolling frame?

Pilgrim · 03-15-2004, 05:21 PM

Got any 67 or 68 short stepsides complete?

Davy · 03-15-2004, 05:25 PM

Any Blazers?

cojnit · 03-15-2004, 05:32 PM

looking for a set of Hardware for bucket seats. need everything that attaches the seats to the floor.

thanks

meathead95 · 03-15-2004, 05:53 PM

i need a set of 72 truck bucket seat brackets, an auto tilt column, and a real good single wall blazer top. i am south of nashville and can pick up the top if you have it and if not shipping on the other items to 37180

*dtlilly* · 03-15-2004, 05:58 PM

I also am looking for a set a truck bucket seat brackets. I'm moving to Atlanta soon, and may be able to pick-up.

Castiron9 · 03-15-2004, 06:00 PM

SET OF REASONABLY PRICED TOW HOOKS............

1-PU70 · 03-15-2004, 06:53 PM

How about a heat stove and the pipe to the air cleaner for a 402?

jugernot · 03-15-2004, 07:04 PM

I need a super clean original 68 passenger fender, no alum trim.

hotrodtroy · 03-15-2004, 07:09 PM

How 'bout front and rear sways for a '72LWB fleet

mikeoj · 03-15-2004, 07:30 PM

Where you located????

724x4a/cchevy · 03-15-2004, 07:51 PM

I need a set of 69-72 front tow hooks. I can trade you a set of 67-68 hooks for them. PM me. Thanks

sakohntr · 03-15-2004, 08:33 PM

How about any tool compartment doors and parts?

*Tanker350* · 03-15-2004, 08:52 PM

I'll second the tool door compart's and parts. AM/FM Radios

**BOSS** · 03-15-2004, 09:09 PM

would you happen to have a front wiring harness from the fuse box forward for a 72 super cheyenne with air? could you figure shipping to 65717?

cojnit · 03-15-2004, 09:59 PM

you guys think he is coming back or did we scare him away??

*Tanker350* · 03-15-2004, 10:34 PM

I need auto linkage.

UP GRADE · 03-16-2004, 12:44 PM

I NEED FRONT AND REAR CHROME BUMPERS WITH BRACKETS. (67)

bpmcgee · 03-16-2004, 01:36 PM

I need the screw and grommet from the top of '72 doors -- both sides.

I also need the mounting hardware for 4wd steering dampers.

PM me if you can help.

Brian

PR454SS · 03-16-2004, 02:07 PM

I also responded to the first thread but heard nothing, I sent a PM maybe we can get him up to speed on the responses

*tnchev* · 03-16-2004, 10:41 PM

hey neighbors, as I am new to the board I'm still learning. PM's have been sent to all requests that I have parts for. my digital camera should arrive tomorrow, I will post pics as fast as I can. thanks tnchev

spencra · 03-16-2004, 11:11 PM

Do you have a price on a good pair of 67 stepside fenders?

Thanks, Larry

drink2mny · 03-16-2004, 11:12 PM

Still looking for a chrome "c" for my tailgate band

plus a lock setup for my bed toolbox door..

jays421 · 03-16-2004, 11:57 PM

Hello,
I am looking for a 3/4 ton coil spring posi rear axle. Any chance you would have one of them? If so how much.
Jason
jays421@msn.com

03-15-2004, 04:09 PM	#1
tnchev NON PAYING ADVERTISER Join Date: Mar 2004 Location: Knoxville, TN Posts: 176	23+ 67-72 pu's parting out Hey neighbors, I guess my first thread didn' get anyone up. As the subject says. also i have two large sheds full of parts. Parts run from bare short frames to complete trucks. What I don' have at the minute (but will soon) is tach clusters, am/fm or bucket interiors. Any real interest out there? I will of course be in charlotte, green field LG+MG 51+52. Come back! tnchev (east tn)

03-15-2004, 04:35 PM	#2
1972ChevyGuy Registered User Join Date: Nov 2002 Location: Kannapolis, NC Posts: 552	How much do you want for a 67-72 swb rolling frame? Last edited by 1972ChevyGuy; 03-15-2004 at 10:19 PM.

03-15-2004, 05:21 PM	#3
Pilgrim Registered User Join Date: Mar 2003 Location: Crescent City, FL Posts: 492	Got any 67 or 68 short stepsides complete? __________________ Bob 68 C20 Camper Special

03-15-2004, 05:25 PM	#4
Davy Registered User Join Date: Apr 2003 Location: Rice, Minnesota Posts: 370	Any Blazers? __________________ 1970 Blazer CST Looking for NOS items for my CST restoration.

03-15-2004, 05:32 PM	#5
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	looking for a set of Hardware for bucket seats. need everything that attaches the seats to the floor. thanks __________________ Got "the Midas Touch!"

03-15-2004, 05:53 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i need a set of 72 truck bucket seat brackets, an auto tilt column, and a real good single wall blazer top. i am south of nashville and can pick up the top if you have it and if not shipping on the other items to 37180 __________________ 72 2wd blazer 72 swb 4x4

03-15-2004, 05:58 PM	#7
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I also am looking for a set a truck bucket seat brackets. I'm moving to Atlanta soon, and may be able to pick-up.

03-15-2004, 06:00 PM	#8
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	SET OF REASONABLY PRICED TOW HOOKS............ __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

03-15-2004, 06:53 PM	#9
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	How about a heat stove and the pipe to the air cleaner for a 402? __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

03-15-2004, 07:04 PM	#10
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	I need a super clean original 68 passenger fender, no alum trim.

03-15-2004, 07:09 PM	#11
hotrodtroy Registered User Join Date: Feb 2004 Location: Colorado Springs, CO Posts: 138	sways How 'bout front and rear sways for a '72LWB fleet __________________ '72 C-10 w/ '68 Large Journal 327cu.in. "It's o.k. to dream about what you want to do, until you start doing what you are meant to do." Line from "The Rookie"

03-15-2004, 07:30 PM	#12
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Where you located???? __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

03-15-2004, 07:51 PM	#13
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	I need a set of 69-72 front tow hooks. I can trade you a set of 67-68 hooks for them. PM me. Thanks __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

03-15-2004, 08:33 PM	#14
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	gotta How about any tool compartment doors and parts? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

03-15-2004, 08:52 PM	#15
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	I'll second the tool door compart's and parts. AM/FM Radios



Register or Log In To remove these advertisements.

03-15-2004, 09:09 PM	#16
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	would you happen to have a front wiring harness from the fuse box forward for a 72 super cheyenne with air? could you figure shipping to 65717? __________________ Support our site Norwood Survivor

03-15-2004, 09:59 PM	#17
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	you guys think he is coming back or did we scare him away?? __________________ Got "the Midas Touch!"

03-15-2004, 10:34 PM	#18
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	I need auto linkage.

03-16-2004, 12:44 PM	#19
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	bumpers I NEED FRONT AND REAR CHROME BUMPERS WITH BRACKETS. (67)

03-16-2004, 01:36 PM	#20
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	I need the screw and grommet from the top of '72 doors -- both sides. I also need the mounting hardware for 4wd steering dampers. PM me if you can help. Brian

03-16-2004, 02:07 PM	#21
PR454SS Registered User Join Date: Aug 2003 Location: Louisville, TN Posts: 338	I also responded to the first thread but heard nothing, I sent a PM maybe we can get him up to speed on the responses __________________ PR Too many projects, not enough time! 72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold! 69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam. 78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's 77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs

03-16-2004, 10:41 PM	#22
tnchev NON PAYING ADVERTISER Join Date: Mar 2004 Location: Knoxville, TN Posts: 176	hey neighbors, as I am new to the board I'm still learning. PM's have been sent to all requests that I have parts for. my digital camera should arrive tomorrow, I will post pics as fast as I can. thanks tnchev

03-16-2004, 11:11 PM	#23
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Do you have a price on a good pair of 67 stepside fenders? Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

03-16-2004, 11:12 PM	#24
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Still looking for a chrome "c" for my tailgate band plus a lock setup for my bed toolbox door.. __________________ Support The Board

03-16-2004, 11:57 PM	#25
jays421 Registered User Join Date: Apr 2003 Posts: 9	Hello, I am looking for a 3/4 ton coil spring posi rear axle. Any chance you would have one of them? If so how much. Jason jays421@msn.com

Register or Log In To remove these advertisements.