parts for sale.. one more round - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DarkFox1 · 03-27-2004, 04:59 PM

Recently aquired a parts truck, running 68 SWB.

according to the vin on the engine its a 350 4 bolt out of a 1973. Has camel hump heads and a nice cam in it. Runs good but would need some carb work before its ready to go in. $500 OBO for the engine/radiator.

Also has a working TH350 under it, $100 for that or $550 if you buy the engine and tranny together.

has a 73-87 rearend under it, not sure ratio or anything yet, but $50 OBO for it at the moment.

DarkFox1 · 03-27-2004, 05:02 PM

heres the whole truck. Dads talked me into keeping this bed, but I do have a SWB fleet side steel floor bed that has been disassembled that I would be willing to let go for $400, but theres a lot to explain about that that I'd rather do in PM so if anyones interested there please PM me on it.

Front clip including hood inner fenders outer fenders headlights wire harness turn signals and harness radiator support and hood hinges $400

DarkFox1 · 03-27-2004, 05:04 PM

68 SWB frame/rolling chassis. Again someones mentioned they want this so it may already be spoken for, but I'm posting it here for anyone to look at.

$50

DarkFox1 · 03-27-2004, 05:06 PM

heres a pic of the SWB fleetside bed floor that I hafve for sale. I already took it apart, but this will give you the opportunity to see what condition its really in. The front cross peice and bedsides and inner buckets would come with it for $400

DarkFox1 · 03-27-2004, 05:08 PM

Misc. Items for sale include a whiper cowl, make offer, a pair of LWB fleetside bed sides (I call them "suburban patch panels" because the inside lip is rusted but the outside is perfect) $80 the front bumper off the 68 C10 in the pics, make offer

a pair of 71-72 "grandpa" mirrors.. big trailering mirrors 1 has a small crack in ther glass the others fine, appear to be stainless make offer

and anything else outside in the yard if you come to get something that you may inquire about.. chances are it might be for sale

*rage'nrat638* · 03-27-2004, 06:46 PM

i need a passenger fender

DarkFox1 · 03-28-2004, 08:29 PM

ttt

Chevyguy111786 · 03-28-2004, 08:57 PM

how much would the bedsides, front panel, and tubs for the short bed be? no floor i might be makin it out that way this summer

cojnit · 03-28-2004, 09:28 PM

any seat hardware? looking for a set of bucket brackets and sliders.

DarkFox1 · 03-28-2004, 10:26 PM

unfortuantley no, if I had a set of buckets they'd be in my "to go in my project" pile tho heh, sorry

chevyguy, well, I hadn't really thought about that, I'm not sure if it would be difficult to sell just a bed floor? lemme think about that one

DarkFox1 · 03-29-2004, 09:52 PM

bump

chevyguy, I hate to break up the bed, but I'd be willing to negotiate with ya about it, I want $400 for the whole bed, theres kind of alot to explain about it, if you could PM me about it I can explain better

chevy lover · 03-29-2004, 10:06 PM

has the frame been sold?

chevy lover · 03-29-2004, 10:09 PM

I would also be interested in the rod for the throttle. How much?

DarkFox1 · 03-29-2004, 10:58 PM

the engine bay throttle rod has been.... backwoods engineered

the frame, I'm not sure, I'm actually trying to contact the guy who was gonna buy it as we speak but I failed to get his forum contact name before leaving the chatroom DOH

but I'll let you know soon, if I can't get in touch with him its open market

DarkFox1 · 04-02-2004, 10:06 AM

ttt

DarkFox1 · 04-07-2004, 01:17 PM

ttt, still many parts left

DarkFox1 · 04-08-2004, 01:36 PM

btw prices are negotiable, still plenty of parts left

engine runs good, got the carb fixed up

DarkFox1 · 04-08-2004, 07:43 PM

added 2 new parts to the list here

FREE ITEM:
this red seat, come n get it! its in the way, dont need it cos I'm gonna do buckets or some other conversion in my truck later when I'm ready.

needs re-upholstering (obviously) but the stuffings all still there.

DarkFox1 · 04-08-2004, 07:45 PM

the other new item

LWB bedisdes off a 71 longbed fleet, great outside skin, the inside lip is rusted so it'd need to be repaired, $40 for the set, can't ship this or the seat (rather not ship anything)

ZOOMY · 04-09-2004, 08:24 AM

I'm interested in the bedsides. I'll be in the area next week. PM me your tele. #.......Thanks.........Zoomy

DarkFox1 · 04-13-2004, 09:56 AM

bump, engine and transmission is sold, so I guess we can X that off the list, brake booster and prop. valve is also sold.

03-27-2004, 04:59 PM	#1
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	parts for sale.. one more round Recently aquired a parts truck, running 68 SWB. according to the vin on the engine its a 350 4 bolt out of a 1973. Has camel hump heads and a nice cam in it. Runs good but would need some carb work before its ready to go in. $500 OBO for the engine/radiator. Also has a working TH350 under it, $100 for that or $550 if you buy the engine and tranny together. has a 73-87 rearend under it, not sure ratio or anything yet, but $50 OBO for it at the moment. Attached Images

03-27-2004, 05:02 PM	#2
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	heres the whole truck. Dads talked me into keeping this bed, but I do have a SWB fleet side steel floor bed that has been disassembled that I would be willing to let go for $400, but theres a lot to explain about that that I'd rather do in PM so if anyones interested there please PM me on it. Front clip including hood inner fenders outer fenders headlights wire harness turn signals and harness radiator support and hood hinges $400 Attached Images

03-27-2004, 05:04 PM	#3
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	68 SWB frame/rolling chassis. Again someones mentioned they want this so it may already be spoken for, but I'm posting it here for anyone to look at. $50 Attached Images

03-27-2004, 05:06 PM	#4
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	heres a pic of the SWB fleetside bed floor that I hafve for sale. I already took it apart, but this will give you the opportunity to see what condition its really in. The front cross peice and bedsides and inner buckets would come with it for $400 Attached Images

03-28-2004, 09:28 PM	#9
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	any seat hardware? looking for a set of bucket brackets and sliders. __________________ Got "the Midas Touch!"

03-27-2004, 05:08 PM	#5
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	Misc. Items for sale include a whiper cowl, make offer, a pair of LWB fleetside bed sides (I call them "suburban patch panels" because the inside lip is rusted but the outside is perfect) $80 the front bumper off the 68 C10 in the pics, make offer a pair of 71-72 "grandpa" mirrors.. big trailering mirrors 1 has a small crack in ther glass the others fine, appear to be stainless make offer and anything else outside in the yard if you come to get something that you may inquire about.. chances are it might be for sale

03-27-2004, 06:46 PM	#6
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	i need a passenger fender

03-28-2004, 08:29 PM	#7
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	ttt

03-28-2004, 08:57 PM	#8
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	how much would the bedsides, front panel, and tubs for the short bed be? no floor i might be makin it out that way this summer

03-28-2004, 10:26 PM	#10
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	unfortuantley no, if I had a set of buckets they'd be in my "to go in my project" pile tho heh, sorry chevyguy, well, I hadn't really thought about that, I'm not sure if it would be difficult to sell just a bed floor? lemme think about that one

03-29-2004, 09:52 PM	#11
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	bump chevyguy, I hate to break up the bed, but I'd be willing to negotiate with ya about it, I want $400 for the whole bed, theres kind of alot to explain about it, if you could PM me about it I can explain better

03-29-2004, 10:06 PM	#12
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	has the frame been sold? __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

03-29-2004, 10:09 PM	#13
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	I would also be interested in the rod for the throttle. How much? __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike Last edited by chevy lover; 03-29-2004 at 10:21 PM.

03-29-2004, 10:58 PM	#14
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	the engine bay throttle rod has been.... backwoods engineered the frame, I'm not sure, I'm actually trying to contact the guy who was gonna buy it as we speak but I failed to get his forum contact name before leaving the chatroom DOH but I'll let you know soon, if I can't get in touch with him its open market

04-02-2004, 10:06 AM	#15
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	ttt



Register or Log In To remove these advertisements.

04-07-2004, 01:17 PM	#16
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	ttt, still many parts left

04-08-2004, 01:36 PM	#17
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	btw prices are negotiable, still plenty of parts left engine runs good, got the carb fixed up

04-08-2004, 07:43 PM	#18
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	added 2 new parts to the list here FREE ITEM: this red seat, come n get it! its in the way, dont need it cos I'm gonna do buckets or some other conversion in my truck later when I'm ready. needs re-upholstering (obviously) but the stuffings all still there. Attached Images

04-08-2004, 07:45 PM	#19
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	the other new item LWB bedisdes off a 71 longbed fleet, great outside skin, the inside lip is rusted so it'd need to be repaired, $40 for the set, can't ship this or the seat (rather not ship anything) Attached Images

04-09-2004, 08:24 AM	#20
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bedsides I'm interested in the bedsides. I'll be in the area next week. PM me your tele. #.......Thanks.........Zoomy

04-13-2004, 09:56 AM	#21
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	bump, engine and transmission is sold, so I guess we can X that off the list, brake booster and prop. valve is also sold.

Register or Log In To remove these advertisements.