Parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mhorning · 03-28-2004, 09:14 PM

I have a bunch of stuff laying around that I need to get rid of. I am looking for a good dash pad if anyone has one around and would like to work out some sort of trade let me know.

Front seats and console from a suburban in really nice shape. I was going to put in my truck and changed my mind and decided to keep the bench. I even cut out the brackets that were welded to the floor. You get them too. The one seat needs some repair at the seam, but it should fix up fairly easily. You pick this one up $135.00.

Black seat belts in good shape. I have all four. The casing on the one on the drivers side has a crack in it with a piece missing- see pic. I was going to call Chevy and see if they had a replacement cover, but haven't yet. They work well. $95.00 + shipping

One drivers side fender. I dont' know if it is genuine GM. I have my doubts, but it is in excellent shape. $35.00- Could ship, but I prefer pickup

1987 fuel injected engine. Runs well. Not sure of mileage. The truck said 77K, I'd guess it was 177, but I don't know. It does have the tpi on it . 175.00

Quadrajet m4med carb. Bought for 75.00 from a guy on here a while back. Didn't use it and went with an edelbrock. I'll sell if for 50.00.

Dash Bezel no AC in good shape. I think it was early 80s. $15.00

I can send more pics if anyone is interested.

Mike

mhorning · 03-28-2004, 09:15 PM

pics

mhorning · 03-28-2004, 09:18 PM

seat

mhorning · 03-28-2004, 09:19 PM

bezel

mhorning · 03-28-2004, 09:19 PM

engine

mhorning · 03-28-2004, 09:20 PM

fender

mhorning · 03-28-2004, 09:21 PM

carb

greg0380 · 03-28-2004, 10:12 PM

what size engine is the 87 tbi? Are all the electrical components there like sensors, harness, computer?

**old Rusty C10** · 03-28-2004, 10:14 PM

could i be a PITA and ask you for the numbers on the carb i wanna see if it will fit my truck

mhorning · 03-28-2004, 10:18 PM

greg,

Its a 350. I want to say the 87s were 185hp with the larger heads. I know its also a 4 bolt main. I wound up with it as a package when I bought a tranny. I can get the computer, but I don't have a harness. As far as sensors go, I think most of them are there, but I can't be positive, I am not familiar enough with them to know for sure. I can take more pics if that would help.

mhorning · 03-28-2004, 10:19 PM

Rusty, this is a carb specific for 86s, if you don't have an 86, I don't think it will work. Do you still need the the numbers?

greg0380 · 03-28-2004, 10:42 PM

I wonder if the tbi would work on my 305? I just recently rebuilt the engine and wanted to go fuel injected. Would you be willing to break up the engine, since I just dumped my financing into the rebuild and really cant use the 350. I would need the intake, sensors, tbi and maybe the exhaust manifolds??

mhorning · 03-28-2004, 11:04 PM

greg, I think it would work, but check with a few guys here on the board to be sure. At this point, I'd like to keep it together. I'll let you know if there aren't any takers.

Mike

greg0380 · 03-28-2004, 11:15 PM

ok mike. BTW, where are you located? I'm from southern CT and am wondering how far you are from me...

*1FaastC10* · 03-28-2004, 11:27 PM

what size engine did the carb come off of?

mhorning · 03-28-2004, 11:58 PM

Jeremy, It came off of a 350. I think its 750cfm.

mhorning · 03-28-2004, 11:58 PM

Greg,

I'm in Corning, NY. It's an hour west of Binghamton and about 4 1/2 from NYC.

alf4444 · 03-29-2004, 07:39 PM

how much for the console shipped to 84116

mhorning · 03-29-2004, 11:05 PM

alf444,

I'd like to keep this as a set, but I think I may know where there is another one. Probably run you about 20 bucks for the console. I can check on it and get back to you next week if you're interested.

alf4444 · 03-30-2004, 11:12 AM

Quote:

Originally posted by mhorning
alf444,

I'd like to keep this as a set, but I think I may know where there is another one. Probably run you about 20 bucks for the console. I can check on it and get back to you next week if you're interested.

yeah let me know!

mhorning · 03-31-2004, 07:20 PM

btt

highboy_04 · 03-31-2004, 10:43 PM

what would you sell the motor for with out the fuel injection on it??

mhorning · 03-31-2004, 11:34 PM

Hmm,

Maybe you and Greg could work out a deal here. He wants the fuel injection stuff, not the engine. I could part it out if you guys could figure out a fair price. Maybe he'd go 75 for the intake and injection unit and you could go a 100 bucks. If you guys want to come up with a something creative, I could work with you guys.

highboy_04 · 04-01-2004, 12:18 AM

well just send me a pm and i'd be glad to work with him on some deal. i only have one problem im in Kansas.....

rogf4 · 04-04-2004, 10:42 PM

I have a friend needing a quadra jet he has an 86 chevy had a 305 he rebuilt an 93 350 tbi and tried to put the 305 quadra jet on not working. What kind of shape is the quadra jet in? Did you say it was off a 350? How much shipped to 37891?
Thanks
Roger

03-28-2004, 09:14 PM	#1
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	Parts for sale I have a bunch of stuff laying around that I need to get rid of. I am looking for a good dash pad if anyone has one around and would like to work out some sort of trade let me know. Front seats and console from a suburban in really nice shape. I was going to put in my truck and changed my mind and decided to keep the bench. I even cut out the brackets that were welded to the floor. You get them too. The one seat needs some repair at the seam, but it should fix up fairly easily. You pick this one up $135.00. Black seat belts in good shape. I have all four. The casing on the one on the drivers side has a crack in it with a piece missing- see pic. I was going to call Chevy and see if they had a replacement cover, but haven't yet. They work well. $95.00 + shipping One drivers side fender. I dont' know if it is genuine GM. I have my doubts, but it is in excellent shape. $35.00- Could ship, but I prefer pickup 1987 fuel injected engine. Runs well. Not sure of mileage. The truck said 77K, I'd guess it was 177, but I don't know. It does have the tpi on it . 175.00 Quadrajet m4med carb. Bought for 75.00 from a guy on here a while back. Didn't use it and went with an edelbrock. I'll sell if for 50.00. Dash Bezel no AC in good shape. I think it was early 80s. $15.00 I can send more pics if anyone is interested. Mike Attached Images __________________ 63 Chevy C10 86 Chevy K10 Last edited by mhorning; 03-28-2004 at 09:21 PM.

03-28-2004, 09:15 PM	#2
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	pics pics Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 09:18 PM	#3
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	seat seat Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 09:19 PM	#4
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	bezel bezel Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 09:19 PM	#5
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	engine engine Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 09:20 PM	#6
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	fender fender Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 09:21 PM	#7
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	carb carb Attached Images __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 10:12 PM	#8
greg0380 Registered User Join Date: Dec 2003 Location: CT Posts: 454	what size engine is the 87 tbi? Are all the electrical components there like sensors, harness, computer?

03-28-2004, 10:14 PM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,312	could i be a PITA and ask you for the numbers on the carb i wanna see if it will fit my truck __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-28-2004, 10:18 PM	#10
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	greg, Its a 350. I want to say the 87s were 185hp with the larger heads. I know its also a 4 bolt main. I wound up with it as a package when I bought a tranny. I can get the computer, but I don't have a harness. As far as sensors go, I think most of them are there, but I can't be positive, I am not familiar enough with them to know for sure. I can take more pics if that would help. __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 10:19 PM	#11
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	Rusty, this is a carb specific for 86s, if you don't have an 86, I don't think it will work. Do you still need the the numbers? __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 10:42 PM	#12
greg0380 Registered User Join Date: Dec 2003 Location: CT Posts: 454	I wonder if the tbi would work on my 305? I just recently rebuilt the engine and wanted to go fuel injected. Would you be willing to break up the engine, since I just dumped my financing into the rebuild and really cant use the 350. I would need the intake, sensors, tbi and maybe the exhaust manifolds??

03-28-2004, 11:04 PM	#13
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	greg, I think it would work, but check with a few guys here on the board to be sure. At this point, I'd like to keep it together. I'll let you know if there aren't any takers. Mike __________________ 63 Chevy C10 86 Chevy K10

03-28-2004, 11:15 PM	#14
greg0380 Registered User Join Date: Dec 2003 Location: CT Posts: 454	ok mike. BTW, where are you located? I'm from southern CT and am wondering how far you are from me...

03-28-2004, 11:27 PM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	what size engine did the carb come off of?



Register or Log In To remove these advertisements.

03-28-2004, 11:58 PM	#16
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	Jeremy, It came off of a 350. I think its 750cfm. __________________ 63 Chevy C10 86 Chevy K10

03-29-2004, 07:39 PM	#18
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	how much for the console shipped to 84116 __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

03-29-2004, 11:05 PM	#19
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	alf444, I'd like to keep this as a set, but I think I may know where there is another one. Probably run you about 20 bucks for the console. I can check on it and get back to you next week if you're interested. __________________ 63 Chevy C10 86 Chevy K10

03-31-2004, 07:20 PM	#21
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	btt __________________ 63 Chevy C10 86 Chevy K10

03-31-2004, 10:43 PM	#22
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what would you sell the motor for with out the fuel injection on it?? __________________ '67 c10 350/th350

03-31-2004, 11:34 PM	#23
mhorning Registered User Join Date: Jul 2003 Location: Corning, NY Posts: 158	Hmm, Maybe you and Greg could work out a deal here. He wants the fuel injection stuff, not the engine. I could part it out if you guys could figure out a fair price. Maybe he'd go 75 for the intake and injection unit and you could go a 100 bucks. If you guys want to come up with a something creative, I could work with you guys. __________________ 63 Chevy C10 86 Chevy K10

04-01-2004, 12:18 AM	#24
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	well just send me a pm and i'd be glad to work with him on some deal. i only have one problem im in Kansas..... __________________ '67 c10 350/th350

04-04-2004, 10:42 PM	#25
rogf4 Registered User Join Date: Nov 2003 Location: whitesburg,Tn Posts: 223	I have a friend needing a quadra jet he has an 86 chevy had a 305 he rebuilt an 93 350 tbi and tried to put the 305 quadra jet on not working. What kind of shape is the quadra jet in? Did you say it was off a 350? How much shipped to 37891? Thanks Roger Last edited by rogf4; 04-04-2004 at 10:44 PM.

Register or Log In To remove these advertisements.