![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: May 2010
Location: Shoals, AL
Posts: 299
|
Swapping to factory tach cluster help needed
I took my original cluster out and put in a original tach and small gas gauge into a new tach housing I got off of ebay. I am waiting on my new lens cover befor I can put the new cluster in, my original had the clock so the lens had the hole with a gromet. Anyways, I need help with repinning my cluster connector. I am using the printed circuit board that came with the tach donor and my original cluster was just the standard cluster with a clock. Can anyone help me with what wires will have to be moved and where they need to move to and what is the best way to release the wires from the connector. I have included some pics to best describe what I have done. I have also used LED's in the new cluster and painted the back of the bezel gloss white. Any help would be appreciated! BTW, I have a '86 Sierra Classic Short Stepper.
Last edited by BamaDave; 12-27-2010 at 04:58 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2010
Location: Shoals, AL
Posts: 299
|
Re: Swapping to factory tach cluster help needed
anyone?
|
![]() |
![]() |
![]() |
#3 |
NOT REALLY BANNED!
![]() Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Re: Swapping to factory tach cluster help needed
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2000
Location: Ft. Mill, SC USA
Posts: 931
|
Re: Swapping to factory tach cluster help needed
this is a plug in and go type of swap. Your truck had guages and a clock before right? Since you bought the right era of tach, it just plugs in.
![]()
__________________
PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: Swapping to factory tach cluster help needed
Here is a thread with the link to some diagrams: http://67-72chevytrucks.com/vboard/s...d.php?t=437373
I bought a tool from the Mac tools truck to repin harnesses with, but you can use a paper clip to release the wires in the connector. Make sure you raise the tab back up so they will stay where you want them to. Repin your harness to fit the cluster. If you got teh connector with your donor, it's pretty easy. The General didn't change the colors too much from '73-87.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|