what holes do i fill in on my firewall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

isaacf · 10-29-2010, 09:54 AM

what holes do i fill in on my firewall?

fishingjred73 · 10-29-2010, 10:05 AM

What are your plans are you going back with stock wiring harness, standard transmission, or emergency brake?

KEL · 10-29-2010, 10:07 AM

the ones you aren't going to use !!!!!

tonypaul · 10-29-2010, 10:19 AM

I filled in everything except, brake booster and steering column. I did a engine/trans swap so I knew my gas petal cable was going to be in a different location. Im also rewiring the whole truck with a new harness. I mounted the fuse box up high on the drivers side kick panel and ran the wires down through the vent in the kic panel. I wanted a real clean look with very little wires showing so its takening a little longer to get it done.

isaacf · 10-29-2010, 10:19 AM

Quote:

Originally Posted by KEL

the ones you aren't going to use !!!!!

thank you this is really healpful!

big_al_71 · 10-29-2010, 10:51 AM

Here is a pict of mine when it was being done. You need to know what are you going to run thru the firewall before you start which is what we did.

isaacf · 10-29-2010, 10:18 AM

Quote:

Originally Posted by fishingjred73

What are your plans are you going back with stock wiring harness, standard transmission, or emergency brake?

its going in a 1971 so im replacing the drivers side of the firewall to deal with the relocating of the wiring harness and the e brake it is an auto. but all factory

10-29-2010, 09:54 AM	#1
isaacf Registered User Join Date: Sep 2010 Location: portland oregon Posts: 108	what holes do i fill in on my firewall what holes do i fill in on my firewall? __________________ 1969 chevelle 350 numbers matching 1971 chevy lifted 4x4 (the break up build) http://67-72chevytrucks.com/vboard/s...d.php?t=423605 1993 subaru impreza 1969 blazer cst 8" lift

10-29-2010, 10:05 AM	#2
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: what holes do i fill in on my firewall What are your plans are you going back with stock wiring harness, standard transmission, or emergency brake? __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

10-29-2010, 10:07 AM	#3
KEL 72 GMC Join Date: Feb 2008 Location: Wells, Maine Posts: 534	Re: what holes do i fill in on my firewall the ones you aren't going to use !!!!! Attached Images

10-29-2010, 10:19 AM	#4
tonypaul Registered User Join Date: Nov 2009 Location: Austin Tx Posts: 639	Re: what holes do i fill in on my firewall I filled in everything except, brake booster and steering column. I did a engine/trans swap so I knew my gas petal cable was going to be in a different location. Im also rewiring the whole truck with a new harness. I mounted the fuse box up high on the drivers side kick panel and ran the wires down through the vent in the kic panel. I wanted a real clean look with very little wires showing so its takening a little longer to get it done.

10-29-2010, 10:51 AM	#6
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: what holes do i fill in on my firewall Here is a pict of mine when it was being done. You need to know what are you going to run thru the firewall before you start which is what we did. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.