|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-07-2020, 12:51 AM
|
#1 |
|
Registered User
Join Date: Dec 2018
Location: Salem
Posts: 27
|
86 Scottsdale steering wheel.
I have an aftermarket steering wheel on my truck with a Grant Steering Wheel Installation Kit 3163. I was kinds wanting to revert to stock but have no ides what parts I would even need. Anyone provide any info on this?
|
|
|
|
06-07-2020, 05:39 AM
|
#2 |
|
Registered User
Join Date: Oct 2018
Location: Ontario Peterborough
Posts: 804
|
Re: 86 Scottsdale steering wheel.
This may help you
|
|
|
|
|
06-07-2020, 09:26 AM
|
#3 | |
|
Registered User
Join Date: Dec 2018
Location: Salem
Posts: 27
|
Re: 86 Scottsdale steering wheel.
Quote:
|
|
|
|
|
|
06-07-2020, 09:52 AM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,611
|
Re: 86 Scottsdale steering wheel.
You need to have all of the horn button bits and those vary from wheel to wheel. Most pre airbag GM wheels will fit mechanically if not style wise. There is a spring backed contact that rides in the little cylinder on #7 that provides the horn circuit to the wheel.
IIRC - #1 is the nut that holds the wheel in place. #5 is a PITA lock ring that holds #6 in place. If you are lucky the new wheel with match with the positioning of #7 and #6 and you can just pull the old wheel and install the new one. Sometimes you aren't lucky and have to remove #5 to adjust things. This assume the Grant kit didn't replace some of the stock parts. You might be able to tell by pulling off the horn button on your current wheel. |
|
|
|
|
06-10-2020, 09:45 AM
|
#5 |
|
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
|
Re: 86 Scottsdale steering wheel.
LMC on line. Would have a better pic on the horn parts you may need 3 screws bolts .
https://www.lmctruck.com/1973-87-che...ing-components This should work {but this what it looks like}https://www.summitracing.com/int/parts/dck-882
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bedWas a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
|
|
|
|
06-10-2020, 11:28 AM
|
#6 |
|
Registered User
Join Date: Jun 2014
Location: CO
Posts: 749
|
Re: 86 Scottsdale steering wheel.
Here is the grant install instructions
http://www.grantproducts.com/files/i...7508-00-01.pdf
__________________
79 Chevy 2wd BIG10 350 TH400 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
