>>>where do i drill hole for diy vented gas cap<<<

[1BAD65]

CARB IS FLOODING AFTER REPLACING ALL FUEL LINES AND MECHANICAL FUEL PUMP

TANK HAS 2 LINES OUT AND VENT

PUMP ONLY HAS 2 LINES IN (FROM TANK) AND OUT (TO CARB)

BROTHER TEXTED ME TODAY SAYING CARB FLOODED BADLY - GAS EVERYWHERE

TOLD HIM TO CRACK OPEN THE GAS CAP UNTIL I CAN GET OUT THERE TOMORROW MORNING

I SEARCHED ON HERE AND FOUND ALLOT OF GUYS JUST DRILL A PINHOLE IN THE GAS CAP TO TRULY MAKE IT A VENTED GAS CAP BECAUSE THE STORE BOUGHT "VENTED GAS CAPS" DO NOT TRULY VENT BUT HOLD 3psi !

DOES ANYONE HAVE A PIC OR DIAGRAM SHOWING WHERE I AM SUPPOSED TO DRILL THE PINHOLE?

THANKS GUYS

I WILL CHECK BACK TOMORROW MORNING