Two is easier then one 1965 GMC S/W/BB build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robert Haas · 10-08-2017, 12:32 PM

welding in the No Limit Engineering raised rail kit.

I installed a 1" I.D> tube inside the frame rail welded in place. I will be running the back half electrical inside this. Had to install it before I boxed the frame.

That done I spent the day boxing in the frame with 3/16 steel plate I cut out with the Plasma cutter. Not only will this look fantastic when done, it triples the strength of the back half. With over 575 HP in this truck. It will be important to not let it twist this frame like a pretzel.

Name: 20171007_184044.jpg
Views: 1259
Size: 45.0 KB

Name: 20171007_184044.jpg
Views: 1259
Size: 45.0 KB

Name: 20171007_184126.jpg
Views: 1284
Size: 46.7 KB

Name: 20171007_170850.jpg
Views: 1252
Size: 67.8 KB

Name: 20171007_170932.jpg
Views: 1256
Size: 88.4 KB

Name: IMG_4359.jpg
Views: 1251
Size: 68.9 KB

10-08-2017, 12:32 PM	#11
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Re: Two is easier then one 1965 GMC S/W/BB build welding in the No Limit Engineering raised rail kit. I installed a 1" I.D> tube inside the frame rail welded in place. I will be running the back half electrical inside this. Had to install it before I boxed the frame. That done I spent the day boxing in the frame with 3/16 steel plate I cut out with the Plasma cutter. Not only will this look fantastic when done, it triples the strength of the back half. With over 575 HP in this truck. It will be important to not let it twist this frame like a pretzel.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.