They listened lets use it!

[matt92man]

Originally Posted by Jim_PA

I'm using the ECE engine mounts, and a CPP tubular trans crossmember.

No issues with the mounts, just need to drill 4 holes in the stock front crossmember.

It didn't come with bolts that go into the block, but it's otherwise complete.

Ya, it looks pretty complete. I have already drilled the holes and am waiting until I get done POR15ing the frame and cross members before I bolt them in. I just used the stock mount bolts on the block plates. The heads were a little large, but I think they will work. I used the stock hole location on the frame and drilled the holes in the crossmember accordingly. Will that put it in a good position? Will I need to think about moving it forward or back any? Also thinking about using the stock trans crossmember for now, although that will be determined once I set everything in there.

Thanks for the feedback.