NP205/Transmission Adapter Measurements Request

[Orange Crate]

Originally Posted by pjmoreland

I am also attaching a round pattern NP205 directly to an NV4500. I already modified the NV4500 tail housing to fit on the NP205, and I swapped out the long input shaft for a short one. The most recent measurement request was for locating the shifter in the correct spot for a custom bracket I'm working on that attaches to the transfer case studs.

OK, got it now. I attached my shifter pivot bracket to the hardware attaching the NV to the NP . Just forward of where you have yours. The bracket I made is ugly but doesn't flex too much. Happy shifting......