CA WTB 5 lug axles - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 11-09-2012, 04:03 PM

No problem Tony but I think they are measured to the outside lip of the flange. What is the measurement to the outside of the flange? Can anyone clarify this?

shawno72 · 11-09-2012, 04:43 PM

Quote:

Originally Posted by ortegamotor

Dude I totally dropped the ball. I just ran out to the shop to measure those axls they look to be 30.5 I think thats what you're looking for . PM me for info and my #

Tony

I'll take them, thank you Tony.

ortegamotor · 11-09-2012, 07:38 PM

hey Shawn you got it. Tony

shawno72 · 11-09-2012, 07:43 PM

I'll see you in a couple of weeks

CC69Rat · 11-09-2012, 07:58 PM

What if I measure mine from the same places? That way you'll know for sure. I think those will work though.
Posted via Mobile Device

shawno72 · 11-09-2012, 08:29 PM

Quote:

Originally Posted by CC69Rat

What if I measure mine from the same places? That way you'll know for sure. I think those will work though.
Posted via Mobile Device

Just to be sure, lets do it.

nds1968 · 11-09-2012, 10:23 PM

Check out the diagram http://www.dtscustom.com/axle-order-form.html Letter C measures 30 1/2" on the axles I have from Moser for my 67 C10 stock rearend.

shawno72 · 11-09-2012, 10:37 PM

Quote:

Originally Posted by nds1968

Check out the diagram http://www.dtscustom.com/axle-order-form.html Letter C measures 30 1/2" on the axles I have from Moser for my 67 C10 stock rearend.

Can you take a picture of this measurement?
Posted via Mobile Device

nds1968 · 11-09-2012, 11:02 PM

Hope this helps

shawno72 · 11-09-2012, 11:07 PM

That helps a lot. Thank you.
Edit can you pull the tape the same way as tony did in his pictures?
Posted via Mobile Device

shawno72 · 11-10-2012, 01:33 AM

I'm thinking that if you pull the tape from the bottom of the flange it will be the same as wha Tony measured.
Posted via Mobile Device

nds1968 · 11-10-2012, 02:18 AM

Quote:

Originally Posted by shawno72

I'm thinking that if you pull the tape from the bottom of the flange it will be the same as wha Tony measured.
Posted via Mobile Device

If I measure it from the back side the measurement will be shorter. I'm thinkin' Tony has the longer axles.

shawno72 · 11-10-2012, 09:15 AM

Quote:

Originally Posted by nds1968

If I measure it from the back side the measurement will be shorter. I'm thinkin' Tony has the longer axles.

You may be right. That's why I was hoping to get one more measurement to be sure.
Posted via Mobile Device

CC69Rat · 11-10-2012, 09:46 AM

Outside Mounting surface to end of axle = 30.5. (nds)
Inside of the mounting plate to the end of axle = 30 11/16 (Tony)

Im seeing it as if (nds) measurement was taken from the backside of that plate it would be shorter than 30.5

Seeing the additional pics and posts, I think Tonys might be the longer 71-72 style. 85% sure.
Posted via Mobile Device

shawno72 · 11-10-2012, 09:55 AM

Yeah I'm thinking the same thing Chad.

in my mind I was hoping it wasn't so but the more I think about it, it looks as though they are the longer ones. Chad do you remember how much shipping was on your axles?
Posted via Mobile Device

CC69Rat · 11-10-2012, 11:33 AM

318.xx seems to come to mind but, Im on the East coast of course.. and I got new bearings and seals included.

Sometimes Summit will do free shipping? Jegs maybe?
Posted via Mobile Device

shawno72 · 11-10-2012, 11:40 AM

Quote:

Originally Posted by CC69Rat

318.xx seems to come to mind but, Im on the East coast of course.. and I got new bearings and seals included.

Sometimes Summit will do free shipping? Jegs maybe?
Posted via Mobile Device

Yeah I found them for 272.90 shipped from Summit, no bearings or seals.

CC69Rat · 11-10-2012, 11:55 AM

Yeah man.. if the budget allows, IMO thats the way to go. Just remember, youll need 5 lug drums too.
Posted via Mobile Device

shawno72 · 11-10-2012, 12:13 PM

Quote:

Originally Posted by CC69Rat

Yeah man.. if the budget allows, IMO thats the way to go. Just remember, youll need 5 lug drums too.
Posted via Mobile Device

Those I can get for next to nothing from my job

HotRod C/10 · 11-10-2012, 12:17 PM

Quote:

Originally Posted by shawno72

I just sold my 3.73 gear set

No chance of parting that thing out, huh??

I have another 3:73 setup if interested.
Posted via Mobile Device

ortegamotor · 11-10-2012, 12:22 PM

I have another set in the shop. I better go measure again.

shawno72 · 11-10-2012, 12:26 PM

Quote:

Originally Posted by ortegamotor

I have another set in the shop. I better go measure again.

Thank you Tony, I really appreciate it.

shawno72 · 11-10-2012, 12:27 PM

Quote:

Originally Posted by HotRod C/10

I have another 3:73 setup if interested.
Posted via Mobile Device

I am staying with the 3.08 posi for now but thank you. I just need a set of short axles to go with my 15x7, yes 15x7, new 5 lug steelies

shawno72 · 11-11-2012, 03:54 PM

Ttt
Posted via Mobile Device

shawno72 · 11-12-2012, 04:24 PM

ttt

11-09-2012, 04:03 PM	#26
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles No problem Tony but I think they are measured to the outside lip of the flange. What is the measurement to the outside of the flange? Can anyone clarify this? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-09-2012, 07:38 PM	#28
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: WTB 5 lug axles hey Shawn you got it. Tony Attached Images __________________ ORTEGAMOTOR

11-09-2012, 07:43 PM	#29
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles I'll see you in a couple of weeks __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-09-2012, 07:58 PM	#30
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: WTB 5 lug axles What if I measure mine from the same places? That way you'll know for sure. I think those will work though. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-09-2012, 10:23 PM	#32
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WTB 5 lug axles Check out the diagram http://www.dtscustom.com/axle-order-form.html Letter C measures 30 1/2" on the axles I have from Moser for my 67 C10 stock rearend. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-09-2012, 11:02 PM	#34
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WTB 5 lug axles Hope this helps Attached Images __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

11-09-2012, 11:07 PM	#35
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles That helps a lot. Thank you. Edit can you pull the tape the same way as tony did in his pictures? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" Last edited by shawno72; 11-10-2012 at 01:30 AM.

11-10-2012, 01:33 AM	#36
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles I'm thinking that if you pull the tape from the bottom of the flange it will be the same as wha Tony measured. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-10-2012, 09:46 AM	#39
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: WTB 5 lug axles Outside Mounting surface to end of axle = 30.5. (nds) Inside of the mounting plate to the end of axle = 30 11/16 (Tony) Im seeing it as if (nds) measurement was taken from the backside of that plate it would be shorter than 30.5 Seeing the additional pics and posts, I think Tonys might be the longer 71-72 style. 85% sure. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-10-2012, 09:55 AM	#40
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles Yeah I'm thinking the same thing Chad. in my mind I was hoping it wasn't so but the more I think about it, it looks as though they are the longer ones. Chad do you remember how much shipping was on your axles? Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-10-2012, 11:33 AM	#41
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: WTB 5 lug axles 318.xx seems to come to mind but, Im on the East coast of course.. and I got new bearings and seals included. Sometimes Summit will do free shipping? Jegs maybe? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-10-2012, 11:55 AM	#43
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: WTB 5 lug axles Yeah man.. if the budget allows, IMO thats the way to go. Just remember, youll need 5 lug drums too. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-10-2012, 12:22 PM	#46
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: WTB 5 lug axles I have another set in the shop. I better go measure again. __________________ ORTEGAMOTOR

11-11-2012, 03:54 PM	#49
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles Ttt Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-12-2012, 04:24 PM	#50
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: WTB 5 lug axles ttt __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.