I need a set of these valve covers!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

onelow69 · 02-24-2004, 02:20 AM

Those are from a corvett and I love the way they look on our trucks and with good rubber seals they never leak.

onelow69 · 02-24-2004, 03:43 AM

Here our mine on my 62 Nova.

onelow69 · 02-24-2004, 03:44 AM

other

onelow69 · 02-24-2004, 03:45 AM

one more

arkracing · 11-23-2004, 11:32 PM

You can also buy new ones from MoonEyes...with the "screw - in style" oil fill and a PVC hole in the other...but be prepared to spend some $$$$

$265i think

http://69.20.111.53/index.asp?PageAc...ROD&ProdID=490

**pound41** · 11-24-2004, 12:01 AM

69Z 28 and some ss came with the small block covers in the last picture they have oil fill and PCV with a flat circles for a crossed flag emblem and I am sure some vettes had them. My camaro came with them. Also have a set like that with fins and long flat spot with corvette in cursive. No holes though. Was told from earlier sixtys

racer94 · 11-24-2004, 12:04 AM

jerry i have an original set off a corvette WITH THE OIL FILL HOLES,but i cannot sale them for $60,i wish i could but they are a collector item and are worth a hole lot more than that,i dont blame you for not wanting to pay more for them,keep your eyes open and they will pop up..later!

superchevy · 11-24-2004, 04:55 AM

You will not find a set of staggered-bolt hole early Cal Customs or factory Chevrolet Corvette or non-Corvette valve covers with oil fill holes as they were not produced this way....oil fill and breather were through oil-fill "tube" mounted in the intake manifold...again, that is why you see so many with breathers and oil fill holes machined in them by individuals.
This is a a pair of late 50's early 60's Cal Custom covers with staggered bolt holes:

71-longbed · 11-24-2004, 06:06 AM

just curious .. what years did they use the staggered valve cover bolts ???

Bamm · 11-24-2004, 09:21 AM

I bought a new set of valve covers at Charlotte last spring. No longer looking for them, thanks anyway guys.............Jerry

racer94 · 11-24-2004, 09:54 AM

super chevy is correct,although mine are original with fill holes but they were machined in,but the were machined to use the old style oil filler cap...the original peices did not have the filler holes though that is correct

02-24-2004, 02:20 AM	#26
onelow69 Registered User Join Date: Jan 2003 Location: Central Cal Posts: 124	Those are from a corvett and I love the way they look on our trucks and with good rubber seals they never leak. __________________ 69 Chevy Truck, 350, 400trans, Lowered 3.5/6, Disc brake conv, All early classic stuff. 62 Chevy Nova 350, 700R4, 2400stall, F9in, 3.70gear, AlburnPosi, Chevelle Disc Brakes, ect.

02-24-2004, 03:43 AM	#27
onelow69 Registered User Join Date: Jan 2003 Location: Central Cal Posts: 124	Here our mine on my 62 Nova. Attached Images __________________ 69 Chevy Truck, 350, 400trans, Lowered 3.5/6, Disc brake conv, All early classic stuff. 62 Chevy Nova 350, 700R4, 2400stall, F9in, 3.70gear, AlburnPosi, Chevelle Disc Brakes, ect.

02-24-2004, 03:44 AM	#28
onelow69 Registered User Join Date: Jan 2003 Location: Central Cal Posts: 124	other Attached Images __________________ 69 Chevy Truck, 350, 400trans, Lowered 3.5/6, Disc brake conv, All early classic stuff. 62 Chevy Nova 350, 700R4, 2400stall, F9in, 3.70gear, AlburnPosi, Chevelle Disc Brakes, ect.

02-24-2004, 03:45 AM	#29
onelow69 Registered User Join Date: Jan 2003 Location: Central Cal Posts: 124	one more Attached Images __________________ 69 Chevy Truck, 350, 400trans, Lowered 3.5/6, Disc brake conv, All early classic stuff. 62 Chevy Nova 350, 700R4, 2400stall, F9in, 3.70gear, AlburnPosi, Chevelle Disc Brakes, ect.

11-23-2004, 11:32 PM	#30
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Moon You can also buy new ones from MoonEyes...with the "screw - in style" oil fill and a PVC hole in the other...but be prepared to spend some $$$$ $265i think http://69.20.111.53/index.asp?PageAc...ROD&ProdID=490 __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

11-24-2004, 12:01 AM	#31
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	69Z 28 and some ss came with the small block covers in the last picture they have oil fill and PCV with a flat circles for a crossed flag emblem and I am sure some vettes had them. My camaro came with them. Also have a set like that with fins and long flat spot with corvette in cursive. No holes though. Was told from earlier sixtys

11-24-2004, 12:04 AM	#32
racer94 Registered User Join Date: Oct 2004 Location: central missouri Posts: 215	jerry i have an original set off a corvette WITH THE OIL FILL HOLES,but i cannot sale them for $60,i wish i could but they are a collector item and are worth a hole lot more than that,i dont blame you for not wanting to pay more for them,keep your eyes open and they will pop up..later!

11-24-2004, 04:55 AM	#33
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	You will not find a set of staggered-bolt hole early Cal Customs or factory Chevrolet Corvette or non-Corvette valve covers with oil fill holes as they were not produced this way....oil fill and breather were through oil-fill "tube" mounted in the intake manifold...again, that is why you see so many with breathers and oil fill holes machined in them by individuals. This is a a pair of late 50's early 60's Cal Custom covers with staggered bolt holes: Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

11-24-2004, 06:06 AM	#34
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	just curious .. what years did they use the staggered valve cover bolts ??? __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

11-24-2004, 09:21 AM	#35
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I bought a new set of valve covers at Charlotte last spring. No longer looking for them, thanks anyway guys.............Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

11-24-2004, 09:54 AM	#36
racer94 Registered User Join Date: Oct 2004 Location: central missouri Posts: 215	super chevy is correct,although mine are original with fill holes but they were machined in,but the were machined to use the old style oil filler cap...the original peices did not have the filler holes though that is correct



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.