Anybody making and selling side marker filler metal blanks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevLoRay · 10-24-2005, 03:01 PM

Figured someone may know if anyone has any such thing available for sale to the board.

Want to fill in the holes on the sides of the body, left by the removal of the side marker reflectors/lights.

Anybody?

Joe67 · 10-24-2005, 03:05 PM

Anyone I've known who did that just cut out scrap pieces and used them

**Chevy4Life** · 10-24-2005, 03:29 PM

There is a guy on ebay selling them. http://cgi.ebay.com/ebaymotors/67-72...QQcmdZViewItem

tomatocity · 10-24-2005, 03:56 PM

Quote:

Originally Posted by Chevy4Life

There is a guy on ebay selling them.

that is a heck of a deal and a simple fix.

**dennislbrooks** · 10-24-2005, 04:17 PM

agree with 67 c10step --- can be cut out with large snips from body metal or similar in 15 mins. But as they said above are also available on ebay. If you weld this should be no problem --if you are taking them somewhere to get them welded in, let them worry about it.

matthufham · 10-24-2005, 06:06 PM

it's called scrap metal! i used some and bondo'd over to smooth it out. that guy on ebay is makin me mad because you don't need some stupid piece of metal like that. if you have the skill to weld in the filler panel, you should have the skill to cut a piece of scrap metal to size.

edit: warping was an issue on the first fender i did. take it sloooooow

pics: bondo in progress

**special-K** · 10-24-2005, 07:13 PM

It`s a bit more involved on a Stepside fender.WHY DON`T THEY MAKE`67 STEPSIDE FENDERS?

matthufham · 10-24-2005, 07:42 PM

Quote:

Originally Posted by special-K

It`s a bit more involved on a Stepside fender.WHY DON`T THEY MAKE`67 STEPSIDE FENDERS?

oh it's just as easy. infact since you can easily unbolt that small little fender, it's twice as easy to work on.

*72CSTC5* · 10-24-2005, 09:58 PM

Glue your patches in with 3M 8115 metal to metal panel adhesive and save having to buy a welder or paying someone to weld the patches in and prevent warping the panel. Try it, I think you will like the results. I know the gun is about 100.00 dollars and the adhesive about 30-40 or so but alot cheaper in the long run. Many uses for the gun too such as applying seam sealer throughout the whole cab.

**special-K** · 10-24-2005, 11:23 PM

Actually,what makes the Stepside hard is,to mount the flat light on the curved surface the body is raised to the rear making a high spot that needs cut-out and filled,not just the hole for the marker light.Then,the backside is exposed to road spray so it has to be sealed up real good or it`ll bubble up real quick.

pissonNOS · 10-25-2005, 12:19 AM

i have bought from that guy on ebay there good people to deal with if you wanted some input on that issue

**dennislbrooks** · 10-25-2005, 07:04 AM

The donor truck you take the collar off of -- I want the 4 speed......PM me.

larry may · 10-25-2005, 07:24 AM

I asked for srap metal once. Guy had a hopper full of it. He told me NO I DO NOT HAVE SCRAP ! However ; I do have odds and ends peices. Got same story at a lumber yard .Odds and ends only . No Scrap.

**special-K** · 10-25-2005, 09:15 AM

Cut your door for speakers and fill your lights!

10-24-2005, 03:01 PM	#1
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Anybody making and selling side marker filler metal blanks? Figured someone may know if anyone has any such thing available for sale to the board. Want to fill in the holes on the sides of the body, left by the removal of the side marker reflectors/lights. Anybody? __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

10-24-2005, 03:05 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: Anybody making and selling side marker filler metal blanks? Anyone I've known who did that just cut out scrap pieces and used them __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-24-2005, 03:29 PM	#3
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: Anybody making and selling side marker filler metal blanks? There is a guy on ebay selling them. http://cgi.ebay.com/ebaymotors/67-72...QQcmdZViewItem

10-24-2005, 04:17 PM	#5
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	Re: Anybody making and selling side marker filler metal blanks? agree with 67 c10step --- can be cut out with large snips from body metal or similar in 15 mins. But as they said above are also available on ebay. If you weld this should be no problem --if you are taking them somewhere to get them welded in, let them worry about it.

10-24-2005, 06:06 PM	#6
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Anybody making and selling side marker filler metal blanks? it's called scrap metal! i used some and bondo'd over to smooth it out. that guy on ebay is makin me mad because you don't need some stupid piece of metal like that. if you have the skill to weld in the filler panel, you should have the skill to cut a piece of scrap metal to size. edit: warping was an issue on the first fender i did. take it sloooooow pics: bondo in progress Attached Images Last edited by matthufham; 10-24-2005 at 06:08 PM.

10-24-2005, 07:13 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Anybody making and selling side marker filler metal blanks? It`s a bit more involved on a Stepside fender.WHY DON`T THEY MAKE`67 STEPSIDE FENDERS? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-24-2005, 09:58 PM	#9
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: Anybody making and selling side marker filler metal blanks? Glue your patches in with 3M 8115 metal to metal panel adhesive and save having to buy a welder or paying someone to weld the patches in and prevent warping the panel. Try it, I think you will like the results. I know the gun is about 100.00 dollars and the adhesive about 30-40 or so but alot cheaper in the long run. Many uses for the gun too such as applying seam sealer throughout the whole cab.

10-24-2005, 11:23 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Anybody making and selling side marker filler metal blanks? Actually,what makes the Stepside hard is,to mount the flat light on the curved surface the body is raised to the rear making a high spot that needs cut-out and filled,not just the hole for the marker light.Then,the backside is exposed to road spray so it has to be sealed up real good or it`ll bubble up real quick. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-25-2005, 12:19 AM	#11
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: Anybody making and selling side marker filler metal blanks? i have bought from that guy on ebay there good people to deal with if you wanted some input on that issue __________________ 69 GMC bagged

10-25-2005, 07:04 AM	#12
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	Re: Anybody making and selling side marker filler metal blanks? The donor truck you take the collar off of -- I want the 4 speed......PM me.

10-25-2005, 07:24 AM	#13
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Anybody making and selling side marker filler metal blanks? I asked for srap metal once. Guy had a hopper full of it. He told me NO I DO NOT HAVE SCRAP ! However ; I do have odds and ends peices. Got same story at a lumber yard .Odds and ends only . No Scrap.

10-25-2005, 09:15 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Anybody making and selling side marker filler metal blanks? Cut your door for speakers and fill your lights! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.