67 - 72 w/ newer beds? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed72chevy · 02-04-2006, 09:41 PM

what all beds fit on the 67-72 c10 ive seen pictures of some kool stepside beds, but what all does it take to put one on? Does any one have any pictures. i would appreciate it.

70c10 · 02-04-2006, 09:51 PM

There are alot on ebay. The wheel arches are flatter on the rear than our old trucks. So when you look at it from the side the front arch is more curved.

67ChevyRedneck · 02-04-2006, 10:10 PM

The bed you are referring to is a 88-98 Silverado stepside bed. I don't know what all it takes to install one, but I think it is fairly simple. Some people dont like them because the wheel arches are different. You can use any bed you want and be creative. I've seen one truck with a 88-98 fleetside bed cut down to a stepside width with 67-72 stepside fenders grafted on it, that baby looked sweet.

nyncompute · 02-04-2006, 10:14 PM

Not a big fan of the look.. just doesn't seem right

67ChevyRedneck · 02-04-2006, 10:21 PM

Quote:

Originally Posted by nyncompute

Not a big fan of the look.. just doesn't seem right

I PREFER stock as well, but have seen some nice ones. You see more of these trucks in the rust belt areas. A lot of the 88-98 stepside beds were fiberglass, so no rust. Take your rusty crusy NY or Ohio or whatever bed off and viola, rust free bed. The stepside bodylines match the original on the cab fairly well, but like it has been said, the wheel well thing looks a little off.

**special-K** · 02-04-2006, 11:09 PM

Quote:

Originally Posted by shortbed72chevy

what all beds fit on the 67-72 c10 ive seen pictures of some kool stepside beds, but what all does it take to put one on? Does any one have any pictures. i would appreciate it.

67-72 fits perfect.It doesn`t get any better`n that.

pebbleboy · 02-04-2006, 11:22 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=123833

beamers69 · 02-05-2006, 07:25 AM

I started to do this to my 69, here's a picture with the bed
on the truck. I checked around before mounting and
found that the factory holes don't line up. Alternatives are
to either drill holes in bed or do as I did and get some
brackets made. I went to local welding shop and they did
it for about $100.00. Since that time I went back to stock
bed. Still working on it. db

02-04-2006, 09:41 PM	#1
shortbed72chevy Registered User Join Date: Dec 2005 Location: Braselton, Ga Posts: 9	67 - 72 w/ newer beds? what all beds fit on the 67-72 c10 ive seen pictures of some kool stepside beds, but what all does it take to put one on? Does any one have any pictures. i would appreciate it.

02-04-2006, 09:51 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: 67 - 72 w/ newer beds? There are alot on ebay. The wheel arches are flatter on the rear than our old trucks. So when you look at it from the side the front arch is more curved. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-04-2006, 10:10 PM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 67 - 72 w/ newer beds? The bed you are referring to is a 88-98 Silverado stepside bed. I don't know what all it takes to install one, but I think it is fairly simple. Some people dont like them because the wheel arches are different. You can use any bed you want and be creative. I've seen one truck with a 88-98 fleetside bed cut down to a stepside width with 67-72 stepside fenders grafted on it, that baby looked sweet. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-04-2006, 10:14 PM	#4
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	Re: 67 - 72 w/ newer beds? Not a big fan of the look.. just doesn't seem right

02-05-2006, 07:25 AM	#8
beamers69 Active Member Join Date: Aug 2003 Location: Pearl, Mississippi Posts: 195	Re: 67 - 72 w/ newer beds? I started to do this to my 69, here's a picture with the bed on the truck. I checked around before mounting and found that the factory holes don't line up. Alternatives are to either drill holes in bed or do as I did and get some brackets made. I went to local welding shop and they did it for about $100.00. Since that time I went back to stock bed. Still working on it. db Attached Images __________________ 69_67_92 C-10 Drivable/Under Construction 2002 Impala 1999 Toyota 4-runner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.