Flywheel insp cover Q... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 11-06-2005, 05:48 PM

The cover for a 4.3/700R4 would fit on an old school TH350 or TH400, right?
How about under a 2004R?
How about under a 2.8 powered rear wheel drive?
What about the powerglide?

Longhorn Man · 11-06-2005, 08:18 PM

bump

stllookn · 11-06-2005, 11:40 PM

Good question! I swear my Powerglide, TH350 or TH400 are all different and will not interchange. Did every tranny have a different cover?

**VetteVet** · 11-07-2005, 12:19 AM

Andy the e dimensions in this website are different for the 350/400ths and the 200/700r4s so I don't know for sure. I have a 350th and a 700r4 but I couldn't find the cover for the 700 and I don't have one for the 350 so I'll look tomorrow and see if I can find the 700 cover and see if it will fit the th350 and get back to you. Meanwhile check this site..

http://www.tciauto.com/tech_info/trans_dims.htm

*FormerMember* · 11-07-2005, 12:24 AM

4L60E/700R4 will fit a 350 (done it with the crappy sheet metal ones)
4L80E will fit a th400

Th400 and Th350 are different patterns, methinks.

Longhorn Man · 11-18-2005, 11:57 PM

anyone confirm/deny grendals statement?

*FormerMember* · 11-19-2005, 09:16 AM

I wish I had a 4L60 around to take pics of for you.

I can take pics of a th350 and th400 though.

Also, stllookn and I agree at least on the different patterns of the th400, th350 and powerglide.

dwaite72lnghrn · 11-19-2005, 04:58 PM

I put a 4l80e dust cover on my TH400. It will only accept the top 2 bolts and extends down to the bottom of the trans pan(th400). I did this because the 502 had the 1 piece rear seal and the th400 cover would not go on it.

dznucks · 02-07-2006, 09:12 AM

Does anyone know where to get a replacement flywheel dust cover for a 3 speed column shift tranny? By the way what is the correct name for this transmission?

*FormerMember* · 02-07-2006, 09:18 AM

Quote:

Originally Posted by dwaite72lnghrn

I put a 4l80e dust cover on my TH400. It will only accept the top 2 bolts and extends down to the bottom of the trans pan(th400). I did this because the 502 had the 1 piece rear seal and the th400 cover would not go on it.

Sheet metal (2wd) or cast aluminum (4wd) one?

Sheet metal fit 4L80E cover fit on the Th400 I have in my C10.

dznucks · 02-07-2006, 03:59 PM

it is a sheet metal dust cover that fits a 343 saginaw.
does anyone know where to find one?

11-06-2005, 05:48 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Flywheel insp cover Q... The cover for a 4.3/700R4 would fit on an old school TH350 or TH400, right? How about under a 2004R? How about under a 2.8 powered rear wheel drive? What about the powerglide?

11-06-2005, 08:18 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Flywheel insp cover Q... bump

11-06-2005, 11:40 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Flywheel insp cover Q... Good question! I swear my Powerglide, TH350 or TH400 are all different and will not interchange. Did every tranny have a different cover? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-07-2005, 12:19 AM	#4
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	Re: Flywheel insp cover Q... Andy the e dimensions in this website are different for the 350/400ths and the 200/700r4s so I don't know for sure. I have a 350th and a 700r4 but I couldn't find the cover for the 700 and I don't have one for the 350 so I'll look tomorrow and see if I can find the 700 cover and see if it will fit the th350 and get back to you. Meanwhile check this site.. http://www.tciauto.com/tech_info/trans_dims.htm __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

11-07-2005, 12:24 AM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Flywheel insp cover Q... 4L60E/700R4 will fit a 350 (done it with the crappy sheet metal ones) 4L80E will fit a th400 Th400 and Th350 are different patterns, methinks. Last edited by FormerMember; 11-07-2005 at 12:24 AM.

11-18-2005, 11:57 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Flywheel insp cover Q... anyone confirm/deny grendals statement?

11-19-2005, 09:16 AM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Flywheel insp cover Q... I wish I had a 4L60 around to take pics of for you. I can take pics of a th350 and th400 though. Also, stllookn and I agree at least on the different patterns of the th400, th350 and powerglide.

11-19-2005, 04:58 PM	#8
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	Re: Flywheel insp cover Q... I put a 4l80e dust cover on my TH400. It will only accept the top 2 bolts and extends down to the bottom of the trans pan(th400). I did this because the 502 had the 1 piece rear seal and the th400 cover would not go on it. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

02-07-2006, 09:12 AM	#9
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Flywheel insp cover Q... Does anyone know where to get a replacement flywheel dust cover for a 3 speed column shift tranny? By the way what is the correct name for this transmission?

02-07-2006, 03:59 PM	#11
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Flywheel insp cover Q... it is a sheet metal dust cover that fits a 343 saginaw. does anyone know where to find one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.