What do I have here? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ozzyracing · 03-18-2006, 12:04 PM

can anyone tell me if this is the original column with a weird adapter or? It does not have a switch for hazard lights. Pics are below, any help greatly appreciated as I want to replace the steering wheel but need to know what adapter to get? It might be original? I don;t know.

SIR · 03-18-2006, 01:13 PM

looks like a standard colunm to me but the turn signal arm snapped off and it looks like there may be a addapter on it allready...

ozzyracing · 03-18-2006, 01:31 PM

Standard being stock right? I want to change the adapter because of its condition and it slighlty rubs against the column.

ozzyracing · 03-18-2006, 01:33 PM

SIR

Thanks for your prompt response above. I think I will just pickup a 60-66 adapter today and see if it works. I just didn't want to buy one that didn't work and try to keep exchanging until i found the right one.

jgrh64 · 03-19-2006, 08:33 AM

Befor replacement parts were offered, I put one of these on my old truck. I just allows bypass of internal mech. for turn signals and gives emergency flashers, but I see you have a signal stat on dash ( emergency flashers) so why not see whats wrong with column turn signals or just get a 70's to early 80's chevy van column to replace it there are articles posted on conversion and you would regain self cancelling feature.

03-18-2006, 12:04 PM	#1
ozzyracing Registered User Join Date: Mar 2005 Location: Arizona Posts: 260	What do I have here? can anyone tell me if this is the original column with a weird adapter or? It does not have a switch for hazard lights. Pics are below, any help greatly appreciated as I want to replace the steering wheel but need to know what adapter to get? It might be original? I don;t know. Attached Images __________________ 65 SWB 454 350T

03-18-2006, 01:13 PM	#2
SIR SIR Join Date: Apr 2005 Location: grants pass oregon,usa Posts: 658	Re: What do I have here? *looks like a standard colunm to me but the turn signal arm snapped off and it looks like there may be a addapter on it allready...* __________________ 66long low fleet http://community.webshots.com/user/LVNR66

03-18-2006, 01:31 PM	#3
ozzyracing Registered User Join Date: Mar 2005 Location: Arizona Posts: 260	Re: What do I have here? Standard being stock right? I want to change the adapter because of its condition and it slighlty rubs against the column. __________________ 65 SWB 454 350T

03-18-2006, 01:33 PM	#4
ozzyracing Registered User Join Date: Mar 2005 Location: Arizona Posts: 260	Re: What do I have here? SIR Thanks for your prompt response above. I think I will just pickup a 60-66 adapter today and see if it works. I just didn't want to buy one that didn't work and try to keep exchanging until i found the right one. __________________ 65 SWB 454 350T

03-19-2006, 08:33 AM	#5
jgrh64 Prestige member Old Farts Club Join Date: Nov 2005 Location: Cleveland Posts: 502	Re: What do I have here? Befor replacement parts were offered, I put one of these on my old truck. I just allows bypass of internal mech. for turn signals and gives emergency flashers, but I see you have a signal stat on dash ( emergency flashers) so why not see whats wrong with column turn signals or just get a 70's to early 80's chevy van column to replace it there are articles posted on conversion and you would regain self cancelling feature. __________________ Hey sombodys gotta do it!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.