Power steering pump shaft thread size - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue85 · 08-01-2006, 08:10 PM

Picked up a puller/installer kit for the power steering pump pulley, got the old one off but can't thread the installer bolt into the shaft. Does anyone know what thread size/type is in the shaft, I don't wanna rethread it, just clean them up.

Solver · 08-01-2006, 09:10 PM

I didn't think the keyway style pump shafts were threaded
On keyway style I just put the pulley on in alignment with keyway and tighten the nut. I suppose that is wrong but I have had to do that quite a few times lately with no problems

Blue85 · 08-01-2006, 09:56 PM

It is a newer 73 and up style without a keyway, the pulley is just press fit over the shaft

phantom dually · 08-01-2006, 10:14 PM

Mine was a 3/8-16

Blue85 · 08-01-2006, 10:27 PM

thanks bud!

08-01-2006, 08:10 PM	#1
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Power steering pump shaft thread size Picked up a puller/installer kit for the power steering pump pulley, got the old one off but can't thread the installer bolt into the shaft. Does anyone know what thread size/type is in the shaft, I don't wanna rethread it, just clean them up. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

08-01-2006, 09:10 PM	#2
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Power steering pump shaft thread size I didn't think the keyway style pump shafts were threaded On keyway style I just put the pulley on in alignment with keyway and tighten the nut. I suppose that is wrong but I have had to do that quite a few times lately with no problems __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

08-01-2006, 09:56 PM	#3
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Power steering pump shaft thread size It is a newer 73 and up style without a keyway, the pulley is just press fit over the shaft __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

08-01-2006, 10:14 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: Power steering pump shaft thread size Mine was a 3/8-16 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-01-2006, 10:27 PM	#5
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Power steering pump shaft thread size thanks bud! __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr. Last edited by Blue85; 08-01-2006 at 10:54 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.