Gas pedal

[Ole Blue 68]

Originally Posted by Jim_PA

Is there a way to keep the pedal from falling off the pins? It just pops off.

Invest in a new pedal....

Seriously though, that's what I wound up doing. The pins wear out the back of the plastic pedal over time. Or depending on how bad the wear is, you might be able to use some sort of filler to tighten those holes up again.

[Jim_PA]

Originally Posted by Ole Blue 68

Invest in a new pedal....

Seriously though, that's what I wound up doing. The pins wear out the back of the plastic pedal over time. Or depending on how bad the wear is, you might be able to use some sort of filler to tighten those holes up again.

I figured that. I also thought about putting some self-tappers down through the very bottom portion of the pedal. It seems like a new pedal might wear out pretty quickly too.

[Ole Blue 68]

Originally Posted by Jim_PA

I figured that. I also thought about putting some self-tappers down through the very bottom portion of the pedal. It seems like a new pedal might wear out pretty quickly too.

When I got my truck it didn't even have a gas pedal and I actually prefer driving it like that.

Some self tappers might work.