lift, crossover, new engine build (two week deadline) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IGOR · 08-28-2006, 12:09 PM

Where's the show this weekend at?

badchev69 · 08-28-2006, 01:10 PM

This saturday the 2nd there is the Carosel Cruise show in Salem, OR at the riverfront. Its a cool show next to the water on nice grass.

On sunday the 3rd there is a show in Brooks OR at the Antuiqe Powerland.

I belive both are free to spectators and like 15 bucks for an entry.

makovai · 08-28-2006, 02:14 PM

damn I'm going camping this weekend or i would go. Hmm maybe I wont leave till sat night and goto the show.
Awesome pics BTW

badchev69 · 08-28-2006, 06:24 PM

Well ill see you all there if you make it! Come and support the K5's , im the only one at these shows....

IGOR · 08-28-2006, 06:35 PM

Well I won't be there anytime soon - need to rebuild my engine, etc, etc, etc... I guess i could just go and walk around though.

Going to the Stanford game in Eugene on Saturday - so won't make this show either.

GO BEAVS!!!

badchev69 · 08-28-2006, 06:43 PM

gotta love them damn Beavers!
You see the Beaver bus i took a pic of?
Used to be my wifes parents and this guy took it and built it to what it is now in 8 weeks. It was a pile before... Now it has a full bar and flat screen tvs and couches all around.... Not a bad little tailgating machine if i do say so..

IGOR · 08-28-2006, 06:45 PM

No - missed that one.

There was an ugly green & yellow one on Craigslist about a year ago.

Are you going to school there? I graduated from there the same year they were #4 in the nation.

badchev69 · 08-29-2006, 12:09 AM

Ya ive gone to school here the last 5 years. The Beaver bus is on the previous page.. Im expecting good things out of the team this year, we'll see what happens...

badchev69 · 08-29-2006, 05:31 PM

oops forgot to put up pics of the new motor, here ya go..

IGOR · 08-29-2006, 06:00 PM

Very nice

If Moore can keep from throwing interceptions - the Beavs might have a decent shot at a good season - last year killed me!

badchev69 · 08-29-2006, 06:26 PM

Agreed!

jaros44sr · 08-29-2006, 06:46 PM

Nice truck, my vote-you won first, oh well I'm partial. Nice serpentine set up, makes a big differance. Nice that you can pick them up in the junkyard.

badchev69 · 09-06-2006, 10:50 PM

Well it was a good weekend, At the Salem show i took 1st place for "best 4x4" and the next day in brooks i did a repeate for best 4x4 against a few guys that thought a Blinged out 05 Hummer and a 03 Silverado had a chance at a classic car show.... Ha ha better luck next time guys!

And that elusive dually that kicked my but last weekend was at the show and left with nuthin this time.

Feels good to see that 2 weeks of work pay off. More to come, Projects are never really done.

IGOR · 09-07-2006, 10:52 AM

Good job!

08-28-2006, 12:09 PM	#26
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: lift, crossover, new engine build (two week deadline) Where's the show this weekend at? __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/

08-28-2006, 01:10 PM	#27
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) This saturday the 2nd there is the Carosel Cruise show in Salem, OR at the riverfront. Its a cool show next to the water on nice grass. On sunday the 3rd there is a show in Brooks OR at the Antuiqe Powerland. I belive both are free to spectators and like 15 bucks for an entry. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-28-2006, 02:14 PM	#28
makovai Senior Member Join Date: Feb 2006 Location: oregon city Posts: 335	Re: lift, crossover, new engine build (two week deadline) damn I'm going camping this weekend or i would go. Hmm maybe I wont leave till sat night and goto the show. Awesome pics BTW __________________ If it aint broke..............fix it till it is. www.fast77.com 1972 - 330 hp crate, 11" lift with 39x18 mickeys. 3/4 ton, cross steer, 4 wheel disc brakes 1996 Z71 w/ 35's

08-28-2006, 06:24 PM	#29
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) Well ill see you all there if you make it! Come and support the K5's , im the only one at these shows.... __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-28-2006, 06:35 PM	#30
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: lift, crossover, new engine build (two week deadline) Well I won't be there anytime soon - need to rebuild my engine, etc, etc, etc... I guess i could just go and walk around though. Going to the Stanford game in Eugene on Saturday - so won't make this show either. GO BEAVS!!! __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/ Last edited by IGOR; 08-28-2006 at 06:36 PM.

08-28-2006, 06:43 PM	#31
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) gotta love them damn Beavers! You see the Beaver bus i took a pic of? Used to be my wifes parents and this guy took it and built it to what it is now in 8 weeks. It was a pile before... Now it has a full bar and flat screen tvs and couches all around.... Not a bad little tailgating machine if i do say so.. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-28-2006, 06:45 PM	#32
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: lift, crossover, new engine build (two week deadline) No - missed that one. There was an ugly green & yellow one on Craigslist about a year ago. Are you going to school there? I graduated from there the same year they were #4 in the nation. __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/

08-29-2006, 12:09 AM	#33
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) Ya ive gone to school here the last 5 years. The Beaver bus is on the previous page.. Im expecting good things out of the team this year, we'll see what happens... __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-29-2006, 05:31 PM	#34
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) oops forgot to put up pics of the new motor, here ya go.. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-29-2006, 06:00 PM	#35
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: lift, crossover, new engine build (two week deadline) Very nice If Moore can keep from throwing interceptions - the Beavs might have a decent shot at a good season - last year killed me! __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/

08-29-2006, 06:26 PM	#36
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) Agreed! __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-29-2006, 06:46 PM	#37
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,437	Re: lift, crossover, new engine build (two week deadline) Nice truck, my vote-you won first, oh well I'm partial. Nice serpentine set up, makes a big differance. Nice that you can pick them up in the junkyard. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-06-2006, 10:50 PM	#38
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: lift, crossover, new engine build (two week deadline) Well it was a good weekend, At the Salem show i took 1st place for "best 4x4" and the next day in brooks i did a repeate for best 4x4 against a few guys that thought a Blinged out 05 Hummer and a 03 Silverado had a chance at a classic car show.... Ha ha better luck next time guys! And that elusive dually that kicked my but last weekend was at the show and left with nuthin this time. Feels good to see that 2 weeks of work pay off. More to come, Projects are never really done. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

09-07-2006, 10:52 AM	#39
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: lift, crossover, new engine build (two week deadline) Good job! __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.