Van tilt for sale $130 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 01-12-2007, 09:49 PM

Traded a board member for this. Was going to switch the 68 to auto, but I'm putting a 5 speed in. Has truck levers. Missing the little red indicator. Nice and tight. $130 shipped.

*67BABYBLUE* · 01-12-2007, 10:11 PM

I'm interested. Could you get me some better pics. Thanks

Burnsman · 01-13-2007, 09:28 AM

I'll get some today. Brian

Burnsman · 01-13-2007, 12:33 PM

Here's a couple more pics. Let me know if there is anything else you need in particular. Brian

Burnsman · 01-14-2007, 08:45 PM

ttt one last time.

project1971 · 01-18-2007, 11:32 AM

you still have this for sale?

*67BABYBLUE* · 01-18-2007, 11:52 AM

I am still interested. Pics were a little blurry. How is the area where the shifter & shifter pin go? Appearance wise is it in good shape? If so I'll take it. Let me know as soon as possible. Thanks

Burnsman · 01-18-2007, 12:48 PM

My camera is showing it's age. Appearance wise it is in good shape. It's good around the shifter hole. If you are not happy, I would stand behind it. I don't need an unhappy board member! Just let me know. Thanks.

*67BABYBLUE* · 01-18-2007, 12:58 PM

I'll take it. PM your info. Do you accept Paypal? Thanks

Longhorn Man · 01-19-2007, 10:01 PM

blue... here's some better photos. it is a very nice unrestored van tilt.

project1971 · 01-19-2007, 10:14 PM

if blue happens to back out put me in line Thanks

Burnsman · 01-19-2007, 10:23 PM

Thanks Andy! To the rescue!

*67BABYBLUE* · 01-19-2007, 10:41 PM

Brian, Did you get the payment? I sent it to you through Paypal this afternoon. Please let me know asap. Thanks

Bob Moore · 01-19-2007, 11:29 PM

The PRNDLL style of lettering is the same as the true truck tilt. That is a bonus in my opinion. Andy is correct - that is a VERY nice column.

Congrats - Bob

Burnsman · 01-19-2007, 11:59 PM

Payment received. Thanks!

Longhorn Man · 01-20-2007, 01:54 PM

i got that out of an early 70's van. I wanna say 73, but it's been 6 months since I've even seen that column. The levers are all correct, the perndle is correct, the harness plug is correct, I *THINK* there is a hole for the neutral safety switch in the right location. The only things that aren't dead on right for a truck is the 4 way flasher button, and the length.
I was gonna use that one in the longhorn, but it was way too good as trading matirial for an axle Brian had.

Longhorn Man · 01-20-2007, 06:04 PM

Brian, baby blue's truck looks a lot like the one you picked up here... what did you do with that one anyways? I can't even find the photos I took of that one.

Burnsman · 01-20-2007, 11:35 PM

Andy, I just bought some 17" wheels from a board member and I just got the motor buttoned up today (461). I'm also working on a 5 speed manual trans for it. I'm going to leave the rest alone for now. Even thought about sanding down the exterior and making it uglier than what it is. Haven't decided on that yet. I just want something to drive and beat on. I'm getting burned out on the show car stuff............

Longhorn Man · 01-21-2007, 01:06 AM

so much for just getting it home and driving it huh?

*67BABYBLUE* · 01-21-2007, 04:08 AM

What about the length?

Burnsman · 01-21-2007, 12:58 PM

I think there is a write-up in the FAQ section. The intermediate shaft just needs shortened. I think you just rap it with a hammer? to get it to shorten (one section slide inside the other). Maybe Andy or someone else can chime in. Brian

Longhorn Man · 01-21-2007, 01:05 PM

you got it brian, on a late 68 to 72, you need to remove the intermediate shaft...the one between the column and the steering gear box, and shorten it by rapping one end with a hammer. Place a 2X4 piece of wood on it to protect the splines... I've damaged them before.
On a 67 and early 68, you need to obtain a colapsable shaft to install.

01-12-2007, 09:49 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Van tilt for sale $130 shipped Traded a board member for this. Was going to switch the 68 to auto, but I'm putting a 5 speed in. Has truck levers. Missing the little red indicator. Nice and tight. $130 shipped. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-12-2007, 10:11 PM	#2
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Van tilt for sale $130 shipped I'm interested. Could you get me some better pics. Thanks

01-13-2007, 09:28 AM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped I'll get some today. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-13-2007, 12:33 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped Here's a couple more pics. Let me know if there is anything else you need in particular. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461 Last edited by Burnsman; 01-13-2007 at 12:33 PM.

01-14-2007, 08:45 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped ttt one last time. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-18-2007, 11:32 AM	#6
project1971 Registered User Join Date: Apr 2003 Location: Oklahoma City Posts: 605	Re: Van tilt for sale $130 shipped you still have this for sale? __________________ 2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver)

01-18-2007, 11:52 AM	#7
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Van tilt for sale $130 shipped I am still interested. Pics were a little blurry. How is the area where the shifter & shifter pin go? Appearance wise is it in good shape? If so I'll take it. Let me know as soon as possible. Thanks

01-18-2007, 12:48 PM	#8
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped My camera is showing it's age. Appearance wise it is in good shape. It's good around the shifter hole. If you are not happy, I would stand behind it. I don't need an unhappy board member! Just let me know. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-18-2007, 12:58 PM	#9
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Van tilt for sale $130 shipped I'll take it. PM your info. Do you accept Paypal? Thanks

01-19-2007, 10:01 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Van tilt for sale $130 shipped blue... here's some better photos. it is a very nice unrestored van tilt.

01-19-2007, 10:14 PM	#11
project1971 Registered User Join Date: Apr 2003 Location: Oklahoma City Posts: 605	Re: Van tilt for sale $130 shipped if blue happens to back out put me in line Thanks __________________ 2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver)

01-19-2007, 10:23 PM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped Thanks Andy! To the rescue! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-19-2007, 10:41 PM	#13
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Van tilt for sale $130 shipped Brian, Did you get the payment? I sent it to you through Paypal this afternoon. Please let me know asap. Thanks

01-19-2007, 11:29 PM	#14
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Van tilt for sale $130 shipped The PRNDLL style of lettering is the same as the true truck tilt. That is a bonus in my opinion. Andy is correct - that is a VERY nice column. Congrats - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

01-19-2007, 11:59 PM	#15
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped Payment received. Thanks! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

01-20-2007, 01:54 PM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Van tilt for sale $130 shipped i got that out of an early 70's van. I wanna say 73, but it's been 6 months since I've even seen that column. The levers are all correct, the perndle is correct, the harness plug is correct, I THINK there is a hole for the neutral safety switch in the right location. The only things that aren't dead on right for a truck is the 4 way flasher button, and the length. I was gonna use that one in the longhorn, but it was way too good as trading matirial for an axle Brian had.

01-20-2007, 06:04 PM	#17
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Van tilt for sale $130 shipped Brian, baby blue's truck looks a lot like the one you picked up here... what did you do with that one anyways? I can't even find the photos I took of that one.

01-20-2007, 11:35 PM	#18
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped Andy, I just bought some 17" wheels from a board member and I just got the motor buttoned up today (461). I'm also working on a 5 speed manual trans for it. I'm going to leave the rest alone for now. Even thought about sanding down the exterior and making it uglier than what it is. Haven't decided on that yet. I just want something to drive and beat on. I'm getting burned out on the show car stuff............ __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-21-2007, 01:06 AM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Van tilt for sale $130 shipped so much for just getting it home and driving it huh?

01-21-2007, 04:08 AM	#20
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: Van tilt for sale $130 shipped What about the length?

01-21-2007, 12:58 PM	#21
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Van tilt for sale $130 shipped I think there is a write-up in the FAQ section. The intermediate shaft just needs shortened. I think you just rap it with a hammer? to get it to shorten (one section slide inside the other). Maybe Andy or someone else can chime in. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

01-21-2007, 01:05 PM	#22
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Van tilt for sale $130 shipped you got it brian, on a late 68 to 72, you need to remove the intermediate shaft...the one between the column and the steering gear box, and shorten it by rapping one end with a hammer. Place a 2X4 piece of wood on it to protect the splines... I've damaged them before. On a 67 and early 68, you need to obtain a colapsable shaft to install.

Register or Log In To remove these advertisements.