Delco vs Bendix bosster ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 12-15-2002, 03:07 PM

I decided to buy a new booster when my truck goes back together but what one is the best to get . I think Delco is better just because , and I know i need a new master so it dosent matter what booster i buy. And does on look diffirent from the other ? Thanks

:p

72MARIO · 12-15-2002, 04:57 PM

One of you knows the diff !!!!!

**john** · 12-15-2002, 07:54 PM

When I changed mine I found there was a difference in the spacing of the mounting holes and the length of rod. Both boosters looked about the same. I would take your old one with and match it up. Im not sure what my cab came off of origionally. It could be a 1/2ton 3/4ton thing. good luck.

72MARIO · 12-15-2002, 08:42 PM

hey is that your truck in the avatar ? I think I have seen a pic of it on the net before . How hard was the keyless entry install?

**john** · 12-15-2002, 09:10 PM

72 MARIO yes its my truck. the keyless entry is an easy install. I think some of the board members sell kits. I bought the acutators and use my alarm system to operate them. John

72MARIO · 12-15-2002, 09:16 PM

What did it cost ? I think that keyless entry would be kinda Kool. Does that kit give you powerlocks aswell ? Thanks for the help

**john** · 12-15-2002, 09:36 PM

Yes it gives you power locks. I did not want the extra switches in my door so I use the keyless only. I put mine in four years ago. J.C.Whitney had a sale on at the time,$29.95 for a four actuator kit and $29.95 for the keyless kit. I have had no problems at all with it. good luck John

72MARIO · 12-15-2002, 09:38 PM

Thanks alot !!!

72MARIO · 12-16-2002, 12:38 PM

ttt

72K10 · 12-16-2002, 09:48 PM

Delco and Bendix are different. You have to know your present type to get the right replacement. That was my experience when I replaced mine.

Chris

12-15-2002, 03:07 PM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Delco vs Bendix bosster ? I decided to buy a new booster when my truck goes back together but what one is the best to get . I think Delco is better just because , and I know i need a new master so it dosent matter what booster i buy. And does on look diffirent from the other ? Thanks :p __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-15-2002, 04:57 PM	#2
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	One of you knows the diff !!!!! __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-15-2002, 07:54 PM	#3
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	When I changed mine I found there was a difference in the spacing of the mounting holes and the length of rod. Both boosters looked about the same. I would take your old one with and match it up. Im not sure what my cab came off of origionally. It could be a 1/2ton 3/4ton thing. good luck. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

12-15-2002, 08:42 PM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	hey is that your truck in the avatar ? I think I have seen a pic of it on the net before . How hard was the keyless entry install? __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-15-2002, 09:10 PM	#5
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	72 MARIO yes its my truck. the keyless entry is an easy install. I think some of the board members sell kits. I bought the acutators and use my alarm system to operate them. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

12-15-2002, 09:16 PM	#6
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	What did it cost ? I think that keyless entry would be kinda Kool. Does that kit give you powerlocks aswell ? Thanks for the help __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-15-2002, 09:36 PM	#7
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Yes it gives you power locks. I did not want the extra switches in my door so I use the keyless only. I put mine in four years ago. J.C.Whitney had a sale on at the time,$29.95 for a four actuator kit and $29.95 for the keyless kit. I have had no problems at all with it. good luck John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

12-15-2002, 09:38 PM	#8
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Thanks alot !!! __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-16-2002, 12:38 PM	#9
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	ttt __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

12-16-2002, 09:48 PM	#10
72K10 Registered User Join Date: Dec 1999 Location: New York Posts: 288	Delco and Bendix are different. You have to know your present type to get the right replacement. That was my experience when I replaced mine. Chris __________________ RLTW 70C10 72K10 72K10 Cheyenne 72C10 Cheyenne Super



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.