FS: NEW Hooker Comp. Headers (Ceramic Coated) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**COBALT** · 11-03-2007, 03:47 PM

These ceramic coated Hooker Competition Headers were bought brand new a couple of years ago for a major project I was planning, but I had to shift priorities. I had to move the headers into dry storage until I could get back to them...but never did.

THEY ARE BRAND NEW! I've only had them out of the box twice. Once when the UPS guy dropped them off and once to take pictures for this posting! They have ZERO rust and ZERO scratches or dents. They are still wrapped in the plastic and in the box they came in. I'm asking $300. They retail for about $360, so that's 20% off just for storing them for a while.

Additional Info:

* I originally purchased them online from Summit Racing
* Make sure they fit your application! Technical Specs, and other important details can be found here.
* Includes original hardware (flange nuts, header and collector gaskets, etc.)

I'm inclined to sell these locally (Seattle area only) because shipping them would be a pain.

whatnow123 · 11-03-2007, 04:02 PM

I might be interested in them if you change your mind about shipping.

**COBALT** · 11-03-2007, 04:05 PM

hmmm...give me your zip code, and I'll do some math. I would send them via UPS most likely.

whatnow123 · 11-03-2007, 04:20 PM

85281

**COBALT** · 11-03-2007, 06:01 PM

Via UPS Ground:

Weight: 37lbs
Dimensions: 38"x10"x18"
From: 98105
To: 85281
Cost: $34.95
It can be there by middle of next week.

Still interested?

whatnow123 · 11-03-2007, 07:01 PM

The state my truck currently is in, I don't need them right at moment. Try to sell them locally since that is what you prefer and to avoid any possible damage during shipping etc...just keep me in mind of you don't get any takers.

**COBALT** · 11-03-2007, 07:23 PM

Ok....

*Billla* · 11-03-2007, 07:56 PM

$275? I'll even pick them up

**COBALT** · 11-04-2007, 03:00 AM

For untouched headers that usually cost $360 plus shipping still in the box? Tempting, but no, I want $300. $60 bucks off is pretty good.

Call me Mr. Scrooge.

70GMCer · 11-04-2007, 04:24 PM

DHL is way cheaper on the shipping than UPS or FEDEX....

**COBALT** · 11-04-2007, 04:47 PM

Sure they are...if you want the box in pieces and the headers to bang together for 1000 miles...

Seriously, chances are it will get handled better because it weighs 37 lbs anyway, but I like to make sure the package gets there w/o huge holes in the box.

Incidentally I managed to get the FedEx and DHL cost for the same zip code (delivered to a residence), and here is how they compare to AZ (all ground service):

UPS: $34.95
FedEx: $27.29
DHL: $22.73

**COBALT** · 11-05-2007, 01:15 AM

Ttt

**COBALT** · 11-06-2007, 07:37 PM

ttt

Jerblazer72 · 11-07-2007, 11:14 PM

Do you know if they will fit a 72 blazer with factory air and 4wd sb 350? I am interested and can pick up in seattle. Thanks.

**COBALT** · 11-08-2007, 05:24 PM

No idea, but you can check here:
http://store.summitracing.com/partde...%2D2452%2D1HKR

**COBALT** · 11-08-2007, 05:28 PM

Well, aparently it's in the list of applications that work with these headers. If you use the link near the bottom to check you can narrow down the search to a 72 blazer sb350:

http://store.summitracing.com/partde...=1#Application

**COBALT** · 11-08-2007, 05:33 PM

Hmmm....but I don't see anything in there about 4wd, so maybe not. I'm sending them a question via email to find out.

Jerblazer72 · 11-09-2007, 10:49 PM

That was what I found, everything was 2wd. Let me know what you find out.

**COBALT** · 11-10-2007, 03:00 AM

Nope. They told me 4wd is a different part number.

Jerblazer72 · 11-10-2007, 12:54 PM

Thanks, I will have to pass.

**COBALT** · 11-12-2007, 04:44 PM

Still for sale...make an offer. I'm willing to come down.

**COBALT** · 11-14-2007, 11:18 PM

Sold

11-03-2007, 03:47 PM	#1
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	FS: NEW Hooker Comp. Headers (Ceramic Coated) These ceramic coated Hooker Competition Headers were bought brand new a couple of years ago for a major project I was planning, but I had to shift priorities. I had to move the headers into dry storage until I could get back to them...but never did. THEY ARE BRAND NEW! I've only had them out of the box twice. Once when the UPS guy dropped them off and once to take pictures for this posting! They have ZERO rust and ZERO scratches or dents. They are still wrapped in the plastic and in the box they came in. I'm asking $300. They retail for about $360, so that's 20% off just for storing them for a while. Additional Info: * I originally purchased them online from Summit Racing * Make sure they fit your application! Technical Specs, and other important details can be found here. * Includes original hardware (flange nuts, header and collector gaskets, etc.) I'm inclined to sell these locally (Seattle area only) because shipping them would be a pain. Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 11-03-2007 at 03:47 PM.

11-03-2007, 04:02 PM	#2
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) I might be interested in them if you change your mind about shipping. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

11-03-2007, 04:05 PM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) hmmm...give me your zip code, and I'll do some math. I would send them via UPS most likely. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-03-2007, 04:20 PM	#4
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) 85281 __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

11-03-2007, 06:01 PM	#5
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Via UPS Ground: Weight: 37lbs Dimensions: 38"x10"x18" From: 98105 To: 85281 Cost: $34.95 It can be there by middle of next week. Still interested? __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-03-2007, 07:01 PM	#6
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) The state my truck currently is in, I don't need them right at moment. Try to sell them locally since that is what you prefer and to avoid any possible damage during shipping etc...just keep me in mind of you don't get any takers. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

11-03-2007, 07:23 PM	#7
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Ok.... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-03-2007, 07:56 PM	#8
Billla Account Suspended Join Date: Sep 2005 Location: Monroe, WA Posts: 3,814	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) $275? I'll even pick them up

11-04-2007, 03:00 AM	#9
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) For untouched headers that usually cost $360 plus shipping still in the box? Tempting, but no, I want $300. $60 bucks off is pretty good. Call me Mr. Scrooge. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-04-2007, 04:24 PM	#10
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) DHL is way cheaper on the shipping than UPS or FEDEX.... __________________ 1997 GMC Sierra Ext 1965 Mustang

11-04-2007, 04:47 PM	#11
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Sure they are...if you want the box in pieces and the headers to bang together for 1000 miles... Seriously, chances are it will get handled better because it weighs 37 lbs anyway, but I like to make sure the package gets there w/o huge holes in the box. Incidentally I managed to get the FedEx and DHL cost for the same zip code (delivered to a residence), and here is how they compare to AZ (all ground service): UPS: $34.95 FedEx: $27.29 DHL: $22.73 __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-05-2007, 01:15 AM	#12
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Ttt __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-06-2007, 07:37 PM	#13
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) ttt __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-07-2007, 11:14 PM	#14
Jerblazer72 Registered User Join Date: Aug 2007 Location: Kaysville, Utah Posts: 119	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Do you know if they will fit a 72 blazer with factory air and 4wd sb 350? I am interested and can pick up in seattle. Thanks.

11-08-2007, 05:24 PM	#15
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) No idea, but you can check here: http://store.summitracing.com/partde...%2D2452%2D1HKR __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.



Register or Log In To remove these advertisements.

11-08-2007, 05:28 PM	#16
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Well, aparently it's in the list of applications that work with these headers. If you use the link near the bottom to check you can narrow down the search to a 72 blazer sb350: http://store.summitracing.com/partde...=1#Application __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-08-2007, 05:33 PM	#17
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Hmmm....but I don't see anything in there about 4wd, so maybe not. I'm sending them a question via email to find out. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-09-2007, 10:49 PM	#18
Jerblazer72 Registered User Join Date: Aug 2007 Location: Kaysville, Utah Posts: 119	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) That was what I found, everything was 2wd. Let me know what you find out.

11-10-2007, 03:00 AM	#19
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Nope. They told me 4wd is a different part number. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-10-2007, 12:54 PM	#20
Jerblazer72 Registered User Join Date: Aug 2007 Location: Kaysville, Utah Posts: 119	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Thanks, I will have to pass.

11-12-2007, 04:44 PM	#21
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Still for sale...make an offer. I'm willing to come down. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

11-14-2007, 11:18 PM	#22
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: FS: NEW Hooker Comp. Headers (Ceramic Coated) Sold __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

Register or Log In To remove these advertisements.