Burb Rear Doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DREW67** · 10-02-2007, 09:01 AM

Question are the burb doors inter-changable with out any modifications?

LuckyHG · 10-02-2007, 04:36 PM

I believe the bolt holes are there for either set up.

Long Roof · 10-02-2007, 07:54 PM

As you can see in those pics the gate/hatch hinge points are not on the burb with doors, BUT you should be able to put the doors on a gate/hatch burb as the hinge holes will be there.

So you can go from gate/hatch to doors but not doors to gate/hatch.

**DREW67** · 10-02-2007, 10:41 PM

And that's the way I would like ot go. doors to gate

CG · 10-03-2007, 01:13 AM

I hope you have a nice gate and hatch cause they are super hard to find in decent shape.

decade22ten · 10-03-2007, 12:07 PM

howdy. what shape are your doors in? are you going to gst rid of them? thanks.

**DREW67** · 10-03-2007, 03:58 PM

Quote:

Originally Posted by decade22ten

howdy. what shape are your doors in? are you going to gst rid of them? thanks.

I have been thinking about buying a burb and it has the barn doors and I wanted one with a gate just wanted to see how difficult it was to switch them out.

Thanks

earl87gta · 10-04-2007, 03:55 AM

I like what Wes has done with his pannle barn dors on the bottom with hatch on top best of both worlds. Im a barn door fan but it would be nice to have the big back window.

1sik7t2 · 10-08-2007, 04:16 PM

yes upper hatch's are hard to find in desent shape i payed $300.00 for just the hatch(fortunatly my gate was still good gate and hatch are better just an opinion

Demmit_Hemmit's 65 · 11-01-2007, 09:58 AM

When changing from barn doors to a lift gate setup you also need to change the rear valance panel also..........................because you have to have the indentations for the hinges to sit into.................go back and compare pictures and you'll see what i'm talking about..................the same is true when changing them on a 60-66 burb................HEMMIT

olblue60@aol.com · 11-01-2007, 04:59 PM

And, is the iron inside that the gate hinges bolt to on an original door truck?? I dunno???

sbrban · 11-19-2007, 12:07 AM

The threaded bolt plate for the gate is not underneath the skin on a barn set up-you would have to weld it in.

70 Suburban · 11-26-2007, 05:39 PM

awww I want the barn doors... I want do do the barn bottom hatch top

Frizzle Fry · 11-27-2007, 11:33 AM

If you have gates you can easily switch to doors. All the door hinge privisions are there. It's switching from doors to gates that takes some cutting/welding.

That's my understanding, and is true for my gated burb.

10-02-2007, 09:01 AM	#1
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Burb Rear Doors Question are the burb doors inter-changable with out any modifications? Attached Images __________________ DREW67

10-02-2007, 04:36 PM	#2
LuckyHG Registered User Join Date: Nov 2005 Location: So. Md Posts: 43	Re: Burb Rear Doors I believe the bolt holes are there for either set up. __________________ 71' 2wd sub <------parts donations accepted 99' 4wd big block sub 92' K2500 ext cab Lb 95' S-10 sfbd, hydro's, etc. 02' Ram bagged etc. 83' International School bus...flat black with alot of room www.Homegrowncustoms.com

10-02-2007, 07:54 PM	#3
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: Burb Rear Doors As you can see in those pics the gate/hatch hinge points are not on the burb with doors, BUT you should be able to put the doors on a gate/hatch burb as the hinge holes will be there. So you can go from gate/hatch to doors but not doors to gate/hatch. __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck

10-02-2007, 10:41 PM	#4
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Burb Rear Doors And that's the way I would like ot go. doors to gate __________________ DREW67

10-03-2007, 01:13 AM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Burb Rear Doors I hope you have a nice gate and hatch cause they are super hard to find in decent shape.

10-03-2007, 12:07 PM	#6
decade22ten Registered User Join Date: Mar 2004 Location: houston,texas Posts: 103	Re: Burb Rear Doors howdy. what shape are your doors in? are you going to gst rid of them? thanks.

10-04-2007, 03:55 AM	#8
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Burb Rear Doors I like what Wes has done with his pannle barn dors on the bottom with hatch on top best of both worlds. Im a barn door fan but it would be nice to have the big back window. __________________ Earl 68 2500 4x4 GMC Burb

10-08-2007, 04:16 PM	#9
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Burb Rear Doors yes upper hatch's are hard to find in desent shape i payed $300.00 for just the hatch(fortunatly my gate was still good gate and hatch are better just an opinion __________________ check out my build "DIRTY BURB"

11-01-2007, 09:58 AM	#10
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: Burb Rear Doors When changing from barn doors to a lift gate setup you also need to change the rear valance panel also..........................because you have to have the indentations for the hinges to sit into.................go back and compare pictures and you'll see what i'm talking about..................the same is true when changing them on a 60-66 burb................HEMMIT

11-01-2007, 04:59 PM	#11
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Burb Rear Doors And, is the iron inside that the gate hinges bolt to on an original door truck?? I dunno??? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-19-2007, 12:07 AM	#12
sbrban Registered User Join Date: Sep 2002 Location: Iowa Posts: 236	Re: Burb Rear Doors The threaded bolt plate for the gate is not underneath the skin on a barn set up-you would have to weld it in. __________________ you never have too many suburbans....

11-26-2007, 05:39 PM	#13
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Burb Rear Doors awww I want the barn doors... I want do do the barn bottom hatch top

11-27-2007, 11:33 AM	#14
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Burb Rear Doors If you have gates you can easily switch to doors. All the door hinge privisions are there. It's switching from doors to gates that takes some cutting/welding. That's my understanding, and is true for my gated burb. Last edited by Frizzle Fry; 11-27-2007 at 11:34 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.