Where can I get a "tailgate band" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hazieview · 02-21-2008, 05:24 PM

In LMC they are almost $500 for a brushed aluminum "tailgate band"
http://lmctruck.com/icatalog/cc/full.asp?page=46

Please tell me you guys know where to get one cheaper than that.....

Thanks

bigblock73 · 02-21-2008, 06:18 PM

eBay...there are always some on there.

**old Rusty C10** · 02-21-2008, 09:51 PM

i keep checking the boneyards ive found a few in there

smashingchuck · 02-21-2008, 09:56 PM

I also see them on eBay all the time.

boatpuller · 02-21-2008, 10:39 PM

i just sold an old one i had that was nice for 85.00 on ebay.i had alot of watchers and bids.the good ones are hot and you'll have to pay.most of the aftermarket ones iv'e seen don't have chevrolet script on them.

Twisted78SS · 02-22-2008, 12:30 AM

Another option I was considering is to do the following;

LMC sells the band for a Blazer
http://www.lmctruck.com/icatalog/bzc/full.asp?page=74
at $149.00 and then convert my handle to inside release using something like this.
http://www.carolinaclassictrucks.com...relocator.html

So it would look like this when finished.

Hazieview · 02-22-2008, 03:23 AM

Quote:

Originally Posted by Twisted78SS

Another option I was considering is to do the following;

LMC sells the band for a Blazer
http://www.lmctruck.com/icatalog/bzc/full.asp?page=74
at $149.00 and then convert my handle to inside release using something like this.
http://www.carolinaclassictrucks.com...relocator.html

So it would look like this when finished.

Hey you guys thanks for all the offers...

However I kind of like this look. has anyone else tried this application?

pcmcobra · 02-22-2008, 03:51 AM

I've got a blazer band sitting in my garage. 2 small dents. I'm probably not going to use it. Has the clips and screws.

kevinr1970 · 02-22-2008, 03:58 AM

Quote:

Originally Posted by Hazieview

However I kind of like this look. has anyone else tried this application?

This came up in the not so distant past and I think N2TRUX and the member that owns the truck in the picture agreed that the fit was a little off. IIRC, it sticks out a little farther than the truck version.

$149 for the Blazer and $499 for the truck???? That seems like and awfully big gap.

**N2TRUX** · 02-22-2008, 11:21 AM

I hate to do this, but you guys managed to turn his request for info in to a Wanted to Buy post so I have to close it.

To answer your question the Blazer band works just fine. There is a bit of gap around the edge but it's not terrible.

02-21-2008, 05:24 PM	#1
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	Where can I get a "tailgate band" In LMC they are almost $500 for a brushed aluminum "tailgate band" http://lmctruck.com/icatalog/cc/full.asp?page=46 Please tell me you guys know where to get one cheaper than that..... Thanks

02-21-2008, 06:18 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Where can I get a "tailgate band" eBay...there are always some on there. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-21-2008, 09:51 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: Where can I get a "tailgate band" i keep checking the boneyards ive found a few in there __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-21-2008, 09:56 PM	#4
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Where can I get a "tailgate band" I also see them on eBay all the time. __________________ 78 Build Thread 4Runner Build

02-21-2008, 10:39 PM	#5
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: Where can I get a "tailgate band" i just sold an old one i had that was nice for 85.00 on ebay.i had alot of watchers and bids.the good ones are hot and you'll have to pay.most of the aftermarket ones iv'e seen don't have chevrolet script on them. __________________ " Never look up a dead dogs butt."

02-22-2008, 12:30 AM	#6
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Where can I get a "tailgate band" Another option I was considering is to do the following; LMC sells the band for a Blazer http://www.lmctruck.com/icatalog/bzc/full.asp?page=74 at $149.00 and then convert my handle to inside release using something like this. http://www.carolinaclassictrucks.com...relocator.html So it would look like this when finished. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

02-22-2008, 03:51 AM	#8
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Where can I get a "tailgate band" I've got a blazer band sitting in my garage. 2 small dents. I'm probably not going to use it. Has the clips and screws. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

02-22-2008, 11:21 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Where can I get a "tailgate band" I hate to do this, but you guys managed to turn his request for info in to a Wanted to Buy post so I have to close it. To answer your question the Blazer band works just fine. There is a bit of gap around the edge but it's not terrible. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 02-22-2008 at 11:25 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.