Checking in from New England (67 GMC 4x4 help) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Patsfan34 · 12-29-2008, 10:08 AM

HAHA, now that's funny!!!

Patsfan34 · 01-09-2009, 12:29 PM

Quote:

Originally Posted by Patsfan34

msgross, sorry that the Colts are gonna loose to the Chargers in the first round...you heard it hear first!!! Hey, at least Manning got a superbowl right, now all he can look forward to is the Hall of Fame.

OUCH!

Update! Chassis has been delivered...finally. I'll be taking pictures tomorrow and uploading by Monday...This is exciting as a mofo!!!

Patsfan34 · 01-11-2009, 09:58 PM

Well, now I’m not sure what I have. First and most importantly, it’s definitely the 292…YES. But, I’m not sure if this truck was a GMC or a Chevy now because the engine, tranny and transfer case are all original orange paint. I read somewhere (I think on this site) that the GMC engines were usually blue. Also, I could NOT find a VIN plate anywhere on this frame, and I checked everywhere like 5 times. So now I’m not even sure if the guy I bought this chassis from was correct telling me it’s a 1967 GMC.

I do have pics but can’t upload until tomorrow but I do have all the numbers off the engine, intake, tranny and transfer case:

Engine (these numbers are on passenger side of block): C0N 2 E51 3994258
Intake: 3923418 GM 28
Top of Tranny: 3901131 D88 GM2
Side of Tranny: 3901127 D288 GM2
Transfer Case: Rockwell Standard Corp.
Model: T-221 N3
Ratio: 1.94
Serial No: 12 67-0 34

So, what do you guys think? Did I make a score or is this stuff not that good?

arkracing · 01-11-2009, 10:15 PM

Wow, I missed this the first time around. I'm a New Englander and a PATS fan as well. Lets see some picts of the truck.

Giants lost today - I'm happy about that!

msgross · 01-11-2009, 10:39 PM

The VIN on my frame is on the top side of the frame just inside the driver front tire... really light stamping..

Patsfan34 · 01-11-2009, 10:47 PM

Quote:

Originally Posted by msgross

The VIN on my frame is on the top side of the frame just inside the driver front tire... really light stamping..

There's no specific plate just etched directly on the frame itself?

msgross · 01-11-2009, 11:09 PM

nope... just some numbers stamped into the steel... very light too..

there are other numbers on parts of the frames but they aren't the VIN..

Patsfan34 · 01-11-2009, 11:33 PM

Quote:

Originally Posted by msgross

nope... just some numbers stamped into the steel... very light too..

there are other numbers on parts of the frames but they aren't the VIN..

You Sir, just made my day!

The only thing that sucks now is that I won't be able to look again until the 24th. Damn! The chassis is at my parents house in MA...LOL!

Patsfan34 · 01-12-2009, 10:30 AM

Pics are coming!

12-29-2008, 10:08 AM	#26
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Checking in from New England (67 GMC 4x4 help) HAHA, now that's funny!!!

01-11-2009, 09:58 PM	#28
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Checking in from New England (67 GMC 4x4 help) Well, now I’m not sure what I have. First and most importantly, it’s definitely the 292…YES. But, I’m not sure if this truck was a GMC or a Chevy now because the engine, tranny and transfer case are all original orange paint. I read somewhere (I think on this site) that the GMC engines were usually blue. Also, I could NOT find a VIN plate anywhere on this frame, and I checked everywhere like 5 times. So now I’m not even sure if the guy I bought this chassis from was correct telling me it’s a 1967 GMC. I do have pics but can’t upload until tomorrow but I do have all the numbers off the engine, intake, tranny and transfer case: Engine (these numbers are on passenger side of block): C0N 2 E51 3994258 Intake: 3923418 GM 28 Top of Tranny: 3901131 D88 GM2 Side of Tranny: 3901127 D288 GM2 Transfer Case: Rockwell Standard Corp. Model: T-221 N3 Ratio: 1.94 Serial No: 12 67-0 34 So, what do you guys think? Did I make a score or is this stuff not that good?

01-11-2009, 10:15 PM	#29
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: Checking in from New England (67 GMC 4x4 help) Wow, I missed this the first time around. I'm a New Englander and a PATS fan as well. Lets see some picts of the truck. Giants lost today - I'm happy about that! __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

01-11-2009, 10:39 PM	#30
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Checking in from New England (67 GMC 4x4 help) The VIN on my frame is on the top side of the frame just inside the driver front tire... really light stamping.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-11-2009, 11:09 PM	#32
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Checking in from New England (67 GMC 4x4 help) nope... just some numbers stamped into the steel... very light too.. there are other numbers on parts of the frames but they aren't the VIN.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-12-2009, 10:30 AM	#34
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Checking in from New England (67 GMC 4x4 help) Pics are coming!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.