67 custom cowl emblem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mater · 01-15-2009, 01:20 PM

Is a Custom emblem on the cowl of a 67 c10 orginal? rare? I have never seen it before. It is cursive and just say "Custom"

theyammieguy · 01-15-2009, 03:01 PM

I'd have to say no.

*OBTG62* · 01-15-2009, 03:09 PM

I am pretty sure it belongs on the door, just below glass and in the middle.

**too much stuff** · 01-15-2009, 03:15 PM

Sounds like the standard 67-68 custom door emblem. A pic would verify it.

**special-K** · 01-15-2009, 07:04 PM

The 67/68 Custom badge on a Chevy goes under the door windows about center and is script within a horizontal rectangle.
The`67 GMC Custom badge goes on the fender where all badges go.It is unique.It is a Custom script at the top of a veryicle rectangle.
The`68 GMC Custom badge is just the script and is located under the door windows rearward on the door.

67mater · 01-15-2009, 07:12 PM

texanidiot25 · 01-15-2009, 07:13 PM

I too have holes in the side of the cowl panel for an emblem..

**too much stuff** · 01-15-2009, 07:15 PM

Not sure what that is from. Not correct for 67-72s...
Texan idiot, alot of times the dealers would put their metal dealer plate in that spot.

10pointgmc · 01-15-2009, 07:24 PM

I had a 71 custom with emblems like that but they were under the window on the door just above the door handle

**too much stuff** · 01-15-2009, 07:28 PM

Quote:

Originally Posted by 10pointgmc

I had a 71 custom with emblems like that but they were under the window on the door just above the door handle

There was a very similar one as you describe. This one isn't it. That one is mounted in a flat area and the door ones were rounded. Also it is a little different style of script.

ChevLoRay · 01-15-2009, 09:28 PM

Back in the day, dealers would put their chrome-plated logos on the cowl. I'm talking back in the Fifties, with the 48-54 style. It didn't matter what brand of truck it was, it was just what they did. Sometimes it was the cowl, other times it was the fender (on later models).

But, none of the '67-72's had any trim on the cowl panel, except for the antenna. My guess is that someone wanted to "gussie" up their truck and put the Custom label on the cowl....to be different. It ain't stock.

01-15-2009, 01:20 PM	#1
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	67 custom cowl emblem Is a Custom emblem on the cowl of a 67 c10 orginal? rare? I have never seen it before. It is cursive and just say "Custom" __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

01-15-2009, 03:01 PM	#2
theyammieguy accepting donations Join Date: Oct 2008 Location: houston tx Posts: 521	Re: 67 custom cowl emblem I'd have to say no. __________________ 1999 Yamaha roadstar 1600 chop. (in progress.) See my builds here>http://s113.photobucket.com/albums/n238/nickrp_2006/ "Ya'll can go to hell, I'm going to Texas." David Crockett

01-15-2009, 03:09 PM	#3
OBTG62 Account Suspended Join Date: Nov 2008 Location: Knoxville, Tn. Posts: 63	Re: 67 custom cowl emblem I am pretty sure it belongs on the door, just below glass and in the middle.

01-15-2009, 03:15 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,737	Re: 67 custom cowl emblem Sounds like the standard 67-68 custom door emblem. A pic would verify it. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-15-2009, 07:04 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: 67 custom cowl emblem The 67/68 Custom badge on a Chevy goes under the door windows about center and is script within a horizontal rectangle. The`67 GMC Custom badge goes on the fender where all badges go.It is unique.It is a Custom script at the top of a veryicle rectangle. The`68 GMC Custom badge is just the script and is located under the door windows rearward on the door. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-15-2009, 07:12 PM	#6
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: 67 custom cowl emblem __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

01-15-2009, 07:13 PM	#7
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: 67 custom cowl emblem I too have holes in the side of the cowl panel for an emblem..

01-15-2009, 07:15 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,737	Re: 67 custom cowl emblem Not sure what that is from. Not correct for 67-72s... Texan idiot, alot of times the dealers would put their metal dealer plate in that spot. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-15-2009, 07:24 PM	#9
10pointgmc Registered User Join Date: Dec 2008 Location: Moores Hill Indiana Posts: 144	Re: 67 custom cowl emblem I had a 71 custom with emblems like that but they were under the window on the door just above the door handle

01-15-2009, 09:28 PM	#11
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: 67 custom cowl emblem Back in the day, dealers would put their chrome-plated logos on the cowl. I'm talking back in the Fifties, with the 48-54 style. It didn't matter what brand of truck it was, it was just what they did. Sometimes it was the cowl, other times it was the fender (on later models). But, none of the '67-72's had any trim on the cowl panel, except for the antenna. My guess is that someone wanted to "gussie" up their truck and put the Custom label on the cowl....to be different. It ain't stock. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.