The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-26-2002, 11:21 AM   #1
gabet40
Registered User
 
Join Date: Dec 1999
Location: Modesto, CA
Posts: 565
Post where to get steering column components?

im also looking for some components in the steering column. is there a manufacturer that we havent found? or are parts like these just hard to come by?

------------------
69 1/2 ton, 350ci/th400, change from long/fleet to short/fleet, shaved door handles, custom sounds, dual headman blockhuggers/flowmasters exhaust, shaved tailgate, 18" budniks with matching steering wheel, 4/6 drop, power windows

__________________
Current owner of 2016 2500 Silverado Midnight Edition.

Former owner of:
69 1/2 ton, change from long/fleet to short/fleet, shaved door handles, shaved tailgate, 4/6 drop, power windows, 700r4
72 blazer, 350 with Holley Commander 950 DFI, crane energizer cam, 350 tranny, dual sanderson blockhuggers/magnaflow exhaust
gabet40 is offline   Reply With Quote
Old 05-01-2002, 09:21 AM   #2
Shorty Cox
Registered User
 
Join Date: May 2001
Location: Liberal, Ks, Us
Posts: 1,091
Post

What parts are you looking for?
Shorty Cox is offline   Reply With Quote
Old 05-01-2002, 11:57 AM   #3
gabet40
Registered User
 
Join Date: Dec 1999
Location: Modesto, CA
Posts: 565
Post

i havent taken a look at it myself but im taking orders from my dad. he said something about a shaft that went all the way down, and one of the parts that holds everything together. i know this isnt helping at all but i havent been over to where the truck is to take a look for myself. he was also asking how much a complete unit would be. thanx for any help
__________________
Current owner of 2016 2500 Silverado Midnight Edition.

Former owner of:
69 1/2 ton, change from long/fleet to short/fleet, shaved door handles, shaved tailgate, 4/6 drop, power windows, 700r4
72 blazer, 350 with Holley Commander 950 DFI, crane energizer cam, 350 tranny, dual sanderson blockhuggers/magnaflow exhaust
gabet40 is offline   Reply With Quote
Old 05-02-2002, 08:12 AM   #4
Shorty Cox
Registered User
 
Join Date: May 2001
Location: Liberal, Ks, Us
Posts: 1,091
Post

Gabet, Have you checked salvage yards. I purchased the entire steering column out of a 65 c10 for $10.00. All i needed was the signal light switch and shift tube. The shift tube, on 3sp manual trannys, is was gives the problem in the old chevys. Linkage crosses up.

So, i would suggest you check salvage yards. Also, when you are driving in the country, always keep a look out behind farmers houses and barns for old pickups. I've located parts that way. Cheap

good luck

Shorty
Shorty Cox is offline   Reply With Quote
Old 05-06-2002, 04:14 PM   #5
gabet40
Registered User
 
Join Date: Dec 1999
Location: Modesto, CA
Posts: 565
Post

is there a diagram anywhere that shows the steering column parted apart? the problem is that were missing parts so were not sure what were missing. but a diagram would clear things up
__________________
Current owner of 2016 2500 Silverado Midnight Edition.

Former owner of:
69 1/2 ton, change from long/fleet to short/fleet, shaved door handles, shaved tailgate, 4/6 drop, power windows, 700r4
72 blazer, 350 with Holley Commander 950 DFI, crane energizer cam, 350 tranny, dual sanderson blockhuggers/magnaflow exhaust
gabet40 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com