WTB three speed cross member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Don Brace** · 07-08-2009, 12:31 PM

Currently I have an automatic crosss member under my 3 speed overdrive and none under the bell housing. I have lots of clutch chatter and think that not having the member under the bell housing maybe part of the problem.
Thanks for the replies.
Don MN

Livrat · 07-09-2009, 12:43 AM

oops, replied to your original post before I saw this one..
If you have alot of clutch chatter it is more than likely for some other reason than the rear mounted crossmember... probably either a warped flywheel, bad clutch disc.. pilot bearing worn out.. bad input bearing in the trans etc..

Quote:

Originally Posted by Don Brace

Currently I have an automatic crosss member under my 3 speed overdrive and none under the bell housing. I have lots of clutch chatter and think that not having the member under the bell housing maybe part of the problem.
Thanks for the replies.
Don MN

**Don Brace** · 07-11-2009, 05:42 PM

I'll check on the clutch and the pilot bearing and let you know.
Thanks
Don

**too much stuff** · 07-11-2009, 06:38 PM

Don, did you find your parts at iola? If not, i will see if i have something here on a parts truck if you still need it. Eric

**Don Brace** · 07-12-2009, 08:18 AM

Eric
I am still looking for the three speed cross member and the inner passenger side rear bumper bracket. Also trying to figure out why my power steering pump is so close to the alternator bracket that I cannot get the P/S cap off.
Don

07-08-2009, 12:31 PM	#1
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: WTB three speed cross member Currently I have an automatic crosss member under my 3 speed overdrive and none under the bell housing. I have lots of clutch chatter and think that not having the member under the bell housing maybe part of the problem. Thanks for the replies. Don MN __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-11-2009, 05:42 PM	#3
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: WTB three speed cross member I'll check on the clutch and the pilot bearing and let you know. Thanks Don __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-11-2009, 06:38 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,871	Re: WTB three speed cross member Don, did you find your parts at iola? If not, i will see if i have something here on a parts truck if you still need it. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back... And sold again... 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-12-2009, 08:18 AM	#5
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: WTB three speed cross member Eric I am still looking for the three speed cross member and the inner passenger side rear bumper bracket. Also trying to figure out why my power steering pump is so close to the alternator bracket that I cannot get the P/S cap off. Don __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.