late model seats?

[tvblazer78]

You do have to make some new holes but it is easy. And they look like 95-99 seats.

Here is mine, I put 01-05 seats in.

[68c10owner]

Originally Posted by tvblazer78

You do have to make some new holes but it is easy. And they look like 95-99 seats.

Here is mine, I put 01-05 seats in.

is there a big difference from the 95-99 seats and the 01-05 seats? Does the later console fit pretty easy? I`m not real partial to the original one so I don`t mind swapping it out. Does either year seats sit higher or lower? I`m happy with the height but could use something a little wider like the later seats.

[tvblazer78]

Originally Posted by 68c10owner

is there a big difference from the 95-99 seats and the 01-05 seats? Does the later console fit pretty easy? I`m not real partial to the original one so I don`t mind swapping it out. Does either year seats sit higher or lower? I`m happy with the height but could use something a little wider like the later seats.

The biggest difference in them are the build in seat belts on the 01-05, and they sit close to the stock seats. The console fits like it was made for it.

[ROLLIN' TOPLEZZ]

Originally Posted by tvblazer78

The biggest difference in them are the build in seat belts on the 01-05, and they sit close to the stock seats. The console fits like it was made for it.

Im also going with this style seats. travis do you picks of the plate/bracket you made and mounting pics? Is it hard for passengers to get in the rear?

[tvblazer78]

I would have to dig out some pics, I know I have some. It's not bad, I did not get the full power so the seat will fold up easy. I just mad a plat 4x4 and weled a nut on the bottom of the floor.

[68c10owner]

Originally Posted by tvblazer78

The biggest difference in them are the build in seat belts on the 01-05, and they sit close to the stock seats. The console fits like it was made for it.

I came across some 2001 or 2002 Tahoe buckets for $150. Whats the deal with the built in seat belt? Can they be removed so I can use my stock ones or can/should i use the built in ones and remove the stock ones?

[tvblazer78]

I would use the ones in the seats but, you would have to have the seat coverd if you take them out of the seats. And if you take them out of your blazer you will only have 3 small holes. So it's all about what you going for. Hope that helped you out and for $150 for new seats that is killer!