vendor for a 4" drop shackle & Hanger set - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 07-17-2009, 01:53 PM

I was going to flip the rearend on my truck, but it is going to be to low for what I use the truck for. So, I'm trying to find a 4" shackle and hanger set to drop the rear of my '87 SWB GMC. Can anyone tell me who is a vendor who sells good kits at fair pricesThanks,

Ed

BTW...I have the flip brackets for my '87...they won't fit my '96 rearend that is going under the truck...Didn't think about the axle tube being larger diameter on the newer one...

bigarmzz · 07-17-2009, 03:11 PM

Quote:

Originally Posted by nlped

I was going to flip the rearend on my truck, but it is going to be to low for what I use the truck for. So, I'm trying to find a 4" shackle and hanger set to drop the rear of my '87 SWB GMC. Can anyone tell me who is a vendor who sells good kits at fair pricesThanks,

Ed

BTW...I have the flip brackets for my '87...they won't fit my '96 rearend that is going under the truck...Didn't think about the axle tube being larger diameter on the newer one...

i got all my lowering components from www.sporttruckdirect.com , you might try them, they sell the western chassis stuff, and its top notch in my opinion

Driveway Dreams · 07-17-2009, 03:34 PM

You could always go the route that KeithSeymore introduced us too. Cut off your stock ones, move them up 2" or so and drill new holes, then bolt it in with grade 8 hardware. Then just get a 2" drop shackle to do the rest. Save some money and get the same effect.

96t/acj · 07-17-2009, 08:11 PM

Now thats what im talking about i will be doing that for sure. -cancels order

07-17-2009, 01:53 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	vendor for a 4" drop shackle & Hanger set I was going to flip the rearend on my truck, but it is going to be to low for what I use the truck for. So, I'm trying to find a 4" shackle and hanger set to drop the rear of my '87 SWB GMC. Can anyone tell me who is a vendor who sells good kits at fair pricesThanks, Ed BTW...I have the flip brackets for my '87...they won't fit my '96 rearend that is going under the truck...Didn't think about the axle tube being larger diameter on the newer one... Last edited by old Rusty C10; 07-17-2009 at 02:16 PM.

07-17-2009, 03:34 PM	#3
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: vendor for a 4" drop shackle & Hanger set You could always go the route that KeithSeymore introduced us too. Cut off your stock ones, move them up 2" or so and drill new holes, then bolt it in with grade 8 hardware. Then just get a 2" drop shackle to do the rest. Save some money and get the same effect. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

07-17-2009, 08:11 PM	#4
96t/acj Registered User Join Date: Jul 2009 Location: San jose ca Posts: 29	Re: vendor for a 4" drop shackle & Hanger set Now thats what im talking about i will be doing that for sure. -cancels order



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.