71BlazerCST

[scott123]

can't upload them. trying to figure out how to reduce the size...s.

[vtblazer]

Originally Posted by scott123

can't upload them. trying to figure out how to reduce the size...s.

Send a few to my e-mail, I'll post em up for ya.

triaddelec@trans-video.net

[vtblazer]

Got these two from scott123:

[scott123]

thanks vtblazer...the entire bottom has about a thousand rivets...even trimmed the top and bottom of the inside doors with aluminum and riveted it all...my buddy said it would be at least a 5lb spool of wire to fix them..LOL...tub looks OK for no more than i have torn back to look...i have a 69 fleetside SWB 4X4 in the works so this one will get pushed back for awhile...it was bought for no more reason than it was on the way to the crusher...i need this about like i need another hole in my head....thanks for the pics VTBLAZER

[vtblazer]

Anything more on this one...?

[scott123]

pretty much the same as the day i got it. got a 69 shortbed 4WD in the shop now. just set the engine in recently and finishing up the mechanicals before going back with body parts. so i have done pretty much nothing with the blazer since bringing it home.
it is a very workable project. it needs rocker boxes and some rocker work. the floor pans are rough on the edges but solid. the bed floor and wheel wells look good as far as i could pull the rubber mat up. top is a goner. previous owner made fiberglass repairs with body filler and it has cracked just about everywhere.
the toughest part will be the rivet repairs. this guy trimmed the blazer inside and out with sheet aluminum, and attached with rivets...i mean like hundreds, maybe even thousands...LOL...the doors are in really good shape inside and out except for the rivet repairs that will be needed.
overall, considering what is there it was well worth what ia paid, plus it was on the way to the scrap yard....i have not committed to doing the project totally as i still have a ton of $$$ left on the 69 project. scott