Never thought a 3/3 and 20's would look so good! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 04-10-2003, 12:04 PM

Damn man! I woulda guessed them'z was 18's, but they'z 20's! I went down to Wal-Mart last night to pickup some snacks for our Halo Tournament, and I noticed a CLEAN white C10 pull in the parking lot. So when I came back out, luckily it was still there and the owner was sitting on the tailgate. I went over and asked him how low it was and he said "3/3, I didn't do a spindle though, I just heated the coils and used shackle/hanger in the back." It was NICE though, I asked him how much he paid for his wheels and he said $1500 rims/tires. (Centerline Archer's) It was an 82..lucky him, he has overdrive.

(But I bet it was a 305!)

Low87 · 04-10-2003, 12:37 PM

I wouldn't be bragging about heating the springs if I was him.
You want to see a 3/3 on 20s, look at Dave's truck.

TIMSPEED · 04-10-2003, 01:08 PM

I thought Dave's was a 4/6?

LOHRTBT · 04-10-2003, 01:14 PM

It is 4/6 Greg has been sniffing Paint fumes.....
And yeah you can get Centerline ARchers for cheap....THey are not the best looking wheel in the world.

TIMSPEED · 04-10-2003, 01:27 PM

Quote:

Originally posted by LOHRTBT
You can get Centerline Archers for cheap....They are not the best looking wheel in the world.

Yeah, but when they're 20's, they sure do look good! I'm thinkin I should have got 18's now...

But I race too much

LOHRTBT · 04-10-2003, 02:01 PM

I race with 20's????
THey are no taller than my 16's I had with a 50 series tire
Heavier..yes..taller...no

Low87 · 04-10-2003, 02:34 PM

Quote:

Originally posted by LOHRTBT
It is 4/6 Greg has been sniffing Paint fumes.....

Sorry Dave, your truck looks much higher than that....

low 84 · 04-10-2003, 02:59 PM

Quote:

Originally posted by Low87

Sorry Dave, your truck looks much higher than that....

lay off the reefer bro

daves looks right at 4/6 to me.

Low87 · 04-10-2003, 03:35 PM

Quote:

Originally posted by low 84

lay off the reefer bro daves looks right at 4/6 to me.

No reefer for me, I got plenty of Krylon last night. BTW, I was giving Dave a hard time.

LOHRTBT · 04-10-2003, 03:51 PM

Quote:

Originally posted by Low87

No reefer for me, I got plenty of Krylon last night. BTW, I was trying to give Dave a hard on.

GROSS!! damn man you need to get therapy!! hahaa

Low87 · 04-10-2003, 03:57 PM

AW DAMMIT! I should have seen that one.

79BIG10 · 04-10-2003, 04:06 PM

Quote:

Originally posted by LOHRTBT

GROSS!! damn man you need to get therapy!! hahaa

You going to carpool together to therapy with him Mr. Anal Andy?

**Captkaos** · 04-10-2003, 04:22 PM

Quote:

Originally posted by TIMSPEED
It was an 82..lucky him, he has overdrive. (But I bet it was a 305!)

If it was factory, it definitely was a 305.

TIMSPEED · 04-10-2003, 04:52 PM

Quote:

Originally posted by Captkaos
If it was factory, it definitely was a 305.

How do you know that??

**Captkaos** · 04-10-2003, 05:51 PM

81-86 pickups you couldn't get a 350 in the US.

*1FaastC10* · 04-10-2003, 09:46 PM

Quote:

Originally posted by Captkaos
81-86 pickups you couldn't get a 350 in the US.

isnt that just for 1/2 ton 2wds>?

bagged81 · 04-10-2003, 10:06 PM

All this talk and still no pics. What gives???

BTW, my 305 sucks.

apstguy · 04-10-2003, 10:07 PM

Quote:

Originally posted by 1FaastC10

isnt that just for 1/2 ton 2wds>?

I think it was on all 1/2 tons.

LOHRTBT · 04-10-2003, 11:12 PM

You all need to attend G's Skool of Racing 305's!!

*1FaastC10* · 04-11-2003, 12:23 AM

im sure someone will chime in with how great 305s are when you add a 3.75" stroke crank. you know, shrouding the valves makes more power, right?

Prerunner1982 · 04-11-2003, 12:43 AM

82 doesnt mean it has over drive, my 82 doesnt.... th350 here. and yes it had a 305.

*1FaastC10* · 04-11-2003, 01:52 PM

my 82 doesnt have OD YET! actually, it may not either... but no 305 for me, i gots a 350. (factory 4.1 truck)

**Captkaos** · 04-11-2003, 05:55 PM

Yes, all 1/2T US trucks between 81 and 86 only had 305.
Not sure where the OD remark came from, but it could have been either TH350 or 700R4, although the 700R4's were crap until 88-89.

LOHRTBT · 04-11-2003, 06:25 PM

My 86 has a 350!!! nanny nanny boo boo!! hahah

04-10-2003, 12:04 PM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Never thought a 3/3 and 20's would look so good! Damn man! I woulda guessed them'z was 18's, but they'z 20's! I went down to Wal-Mart last night to pickup some snacks for our Halo Tournament, and I noticed a CLEAN white C10 pull in the parking lot. So when I came back out, luckily it was still there and the owner was sitting on the tailgate. I went over and asked him how low it was and he said "3/3, I didn't do a spindle though, I just heated the coils and used shackle/hanger in the back." It was NICE though, I asked him how much he paid for his wheels and he said $1500 rims/tires. (Centerline Archer's) It was an 82..lucky him, he has overdrive. (But I bet it was a 305!) __________________ I have a few cars... See Them Here

04-10-2003, 12:37 PM	#2
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	I wouldn't be bragging about heating the springs if I was him. You want to see a 3/3 on 20s, look at Dave's truck. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-10-2003, 01:08 PM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	I thought Dave's was a 4/6? __________________ I have a few cars... See Them Here

04-10-2003, 01:14 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	It is 4/6 Greg has been sniffing Paint fumes..... And yeah you can get Centerline ARchers for cheap....THey are not the best looking wheel in the world. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-10-2003, 02:01 PM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I race with 20's???? THey are no taller than my 16's I had with a 50 series tire Heavier..yes..taller...no __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-10-2003, 03:57 PM	#11
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	AW DAMMIT! I should have seen that one. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-10-2003, 05:51 PM	#15
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	81-86 pickups you couldn't get a 350 in the US. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-10-2003, 10:06 PM	#17
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	All this talk and still no pics. What gives??? BTW, my 305 sucks. __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

04-10-2003, 11:12 PM	#19
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	You all need to attend G's Skool of Racing 305's!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-11-2003, 12:23 AM	#20
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	im sure someone will chime in with how great 305s are when you add a 3.75" stroke crank. you know, shrouding the valves makes more power, right?

04-11-2003, 12:43 AM	#21
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	82 doesnt mean it has over drive, my 82 doesnt.... th350 here. and yes it had a 305. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

04-11-2003, 01:52 PM	#22
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	my 82 doesnt have OD YET! actually, it may not either... but no 305 for me, i gots a 350. (factory 4.1 truck)

04-11-2003, 05:55 PM	#23
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Yes, all 1/2T US trucks between 81 and 86 only had 305. Not sure where the OD remark came from, but it could have been either TH350 or 700R4, although the 700R4's were crap until 88-89. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-11-2003, 06:25 PM	#24
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	My 86 has a 350!!! nanny nanny boo boo!! hahah __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.