700 R4 help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pmercer · 10-20-2009, 06:12 AM

Looking for help.

Planning on installing a 700 R4 in my '61 GMC to a 283. I have found one from a 1994 Chevy truck with 60,000 miles on it. Owner says it is not electrinic, has the kick down cable, and was working fine whwn removed. He wants $400.00 for it.

Is this the correct transmission to install and do you think the price is good?

Thanks

Peter

HotRodYJ · 10-20-2009, 09:53 AM

Must not be a 94 model transmission then. Last of the true 700R4 was about 91 or 92 then the 4L60E took over by 92-93.

**Chevy Fleetside** · 10-20-2009, 11:14 AM

ask him for the serial # on the side of the case above the pan and I can decifer it for you if it is in my book.

steverino66 · 10-20-2009, 03:41 PM

HotrodYJ's right on the years - I believe you can swap speedo cable driver to the older gear; TV cable setup is tricky on the manifold if you don't have original pieces for your carb - I had to buy a custom cable setup for Holley 4-barrel, which is pricey. You'll also need to move the frame crossmember if you have one for automatic and shorten or replace driveshaft (700r4 is longer); auto shifter/linkage may also be an issue depending on what you have now

toms84ss · 10-20-2009, 08:44 PM

Bowtie Overdrives has a nice TV cable set up for just about any carb set up you can think of. Don't know about the trucks, but cars started running electric speedos in 86.

10-20-2009, 06:12 AM	#1
pmercer Registered User Join Date: Oct 2009 Location: St. John's NL Canada Posts: 18	700 R4 help Looking for help. Planning on installing a 700 R4 in my '61 GMC to a 283. I have found one from a 1994 Chevy truck with 60,000 miles on it. Owner says it is not electrinic, has the kick down cable, and was working fine whwn removed. He wants $400.00 for it. Is this the correct transmission to install and do you think the price is good? Thanks Peter

10-20-2009, 09:53 AM	#2
HotRodYJ Registered User Join Date: Jan 2008 Location: Johnson City, TN Posts: 264	Re: 700 R4 help Must not be a 94 model transmission then. Last of the true 700R4 was about 91 or 92 then the 4L60E took over by 92-93. __________________ 66 Chevy Stepside tandem project My junk: http://67-72chevytrucks.com/vboard/s...d.php?t=480902

10-20-2009, 11:14 AM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,780	Re: 700 R4 help ask him for the serial # on the side of the case above the pan and I can decifer it for you if it is in my book. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

10-20-2009, 03:41 PM	#4
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: 700 R4 help HotrodYJ's right on the years - I believe you can swap speedo cable driver to the older gear; TV cable setup is tricky on the manifold if you don't have original pieces for your carb - I had to buy a custom cable setup for Holley 4-barrel, which is pricey. You'll also need to move the frame crossmember if you have one for automatic and shorten or replace driveshaft (700r4 is longer); auto shifter/linkage may also be an issue depending on what you have now

10-20-2009, 08:44 PM	#5
toms84ss Registered User Join Date: Nov 2006 Location: Arizona Posts: 121	Re: 700 R4 help Bowtie Overdrives has a nice TV cable set up for just about any carb set up you can think of. Don't know about the trucks, but cars started running electric speedos in 86.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.