![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
steering column
I have a 78 swb that i am doing a enginge swap from an 89 1500. My question is if the steering column will work in my 78. thanks steve
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
Re: steering column
if this wont work what column will that has a 4 speed automatic. thanks steve
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: steering column
your factory column should work you just need an overdrive inicator for everything to look correct
__________________
![]() 1949 Five Window, 1973 Step Side, 2000 Z71 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
Re: steering column
my factory column was a 3 speed manual , plus i would like tilt. what column will work for this? thanks steve
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: steering column
Any auto column and tilt columns are always a little more $.
__________________
![]() 1949 Five Window, 1973 Step Side, 2000 Z71 |
![]() |
![]() |
![]() |
#6 |
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,369
|
Re: steering column
The 89 column is slightly different than the 78 column. 73-83 had the wiper switch on the dash, starting in 84 the wiper switch was moved to the column...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2009
Location: Tulare, California
Posts: 38
|
Re: steering column
yup. hes right. my new crew cab that i just got had a tilt column swap and now i have two windshield wiper switches and i dunno which one actually works
![]() |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
Re: steering column
so the 89 column will bolt up and i can just wire the wipers thru the column and do away with my switch on the dash,? thanks steve
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
Re: steering column
does any1 else know anything about the columns ? What is my best bet ? Should i just put a shifter on the floor? The 89 column bolts up on the inside of the firewall and the 78 column bolts up on the outside of the firewall. So what do i need to do to get tilt and also an indicator for the new 700r tranny auto? thanks steve
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: steering column
The 89 will not work due to the body style change. You need 73-87 and a 73-83 is direct replacement as stated above. 84-87 will work you will just have an extra wiper switch unless you decide to wire the one on the column up, 88-91 blazers and crew cabs will also work the same as the 84-87. The column from the 89 half ton will not work.
__________________
![]() 1949 Five Window, 1973 Step Side, 2000 Z71 |
![]() |
![]() |
![]() |
#11 |
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,369
|
Re: steering column
The column from a 88-91 suburban is the same as a 88-91 blazer. The PRNDL21 indicator screws into the dash cluster. You will need one from an overdrive truck from 81-87 pickup or 81-91 blazer or suburban...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2009
Location: escondido,ca
Posts: 94
|
Re: steering column
thank you ghettoluxury
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: steering column
no prob
__________________
![]() 1949 Five Window, 1973 Step Side, 2000 Z71 |
![]() |
![]() |
![]() |
Bookmarks |
|
|