TX WTB: 16.5 x10" steel wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

classicchev · 01-03-2010, 01:48 AM

I have a set of wagon wheels in 16.5, 2 have been blasted, 2 are somewhat chrome. If you cant find any others let me know.

Darren

nutsforchevys · 01-14-2010, 06:31 PM

Quote:

Originally Posted by classicchev

I have a set of wagon wheels in 16.5, 2 have been blasted, 2 are somewhat chrome. If you cant find any others let me know.

Darren

Thanks I have wagon wheels on it now that I am wanting to replace.

f.monroe · 01-14-2010, 11:16 PM

Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front .
Frank

nutsforchevys · 01-15-2010, 11:23 AM

Quote:

Originally Posted by f.monroe

Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front .
Frank

Thanks for the info!

1985-GMC · 01-29-2010, 06:14 PM

Hey, look what I found. Their probably a lot more than what you want to spend but hey their brand new. Check out the "Heavy Duty Truck - 20 Series"
http://www.stocktonwheel.com/4wd_offroad.htm

01-03-2010, 01:48 AM	#1
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: WTB: 16.5 x10" steel wheels I have a set of wagon wheels in 16.5, 2 have been blasted, 2 are somewhat chrome. If you cant find any others let me know. Darren Attached Images __________________ 67- 72 Parts collecter

01-14-2010, 11:16 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: WTB: 16.5 x10" steel wheels Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front . Frank __________________ Born and proudly residing in a Red State !

01-29-2010, 06:14 PM	#5
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: WTB: 16.5 x10" steel wheels Hey, look what I found. Their probably a lot more than what you want to spend but hey their brand new. Check out the "Heavy Duty Truck - 20 Series" http://www.stocktonwheel.com/4wd_offroad.htm __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) Last edited by 1985-GMC; 01-30-2010 at 12:00 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.