door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tapeworm · 05-04-2010, 11:12 PM

Got a pic?

You may have put a cut in the door, get if where you want, and reweld it. Do it on the truck if possible to make sure the door fits with the rocker and door opening

jonzcustomshop · 05-04-2010, 11:18 PM

Quote:

Originally Posted by tapeworm

Got a pic?

You may have put a cut in the door, get if where you want, and reweld it. Do it on the truck if possible to make sure the door fits with the rocker and door opening

also check that the rocker is not the problem, and be sure to mount the fender as well to get all three pieces lined up.

05-04-2010, 11:12 PM	#1
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: door Got a pic? You may have put a cut in the door, get if where you want, and reweld it. Do it on the truck if possible to make sure the door fits with the rocker and door opening __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.