sittin lower!

[nlped]

It looks fantastic!!! I would drive the wheels of that beauty.

[joe1982]

Originally Posted by lo72

Joe1982 truck for truck, i believe you have one of the best sitting truck on this board without the high dollar alloy wheels and exotic suspensions, don't get me wrong they are all sharp rides. So tell me what would you do different to get this look? I recall you talking about bottoming out is this still a problem or just something you have to deal with? how did you drop the rear? All in all this is one sharp truck! Where did you get the goodyear tires in a 295?

thanks a lot man. i wasnt going for a flashy look when i started working on my truck. just a stockish look. as far as doing anything differant? i would notch my rear first and just save myself the time. by the way, the rear is dropped with a flip and shackle setup. the scrapping up front is just some thing i deal with now, mainly around my apartment complex, there are speed bumps everywhere. but in case you were wondering, i used 2.5'' ground force coils and 2'' drop springs. and i got these tires about 2 and a half years ago when i had on my cragars. i got them at discount tire. but as far as i know, they dont make them any more

[lo72]

Yeah i couldn't find them on the goodyear site either. BFG was making them and they have stopped as well...dang! you said 2.5 spindle and a 2 in spring. I thought it was a 3 in spring

[joe1982]

the first pics i posted were with the 3''spring. i installed the front 2''springs when i lowered the rear. there was a bit to much of a rake for me.

[atopper]

cooper cobras in a 295/50 maybe ?? i had them yrs ago on my 95 mustang

found this ...

http://www.coopertire.com/html/tires...&artw=50&rd=15