lets see some bagged c10s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dukes69 · 10-07-2008, 08:09 AM

thinking bout baggin my 60. also is it a pain in the A$$ to do?

vin63 · 10-07-2008, 02:34 PM

Here's what mine looked like just after I finished the front and rear suspension. This is at full drop (resting on the stops, so I can drive it in case there is a problem with the air bags).

c10addict · 10-07-2008, 04:37 PM

heres mine..

Reyals Bemus · 10-07-2008, 07:47 PM

Quote:

Originally Posted by c10addict

heres mine..

So sick...

billdo · 10-07-2008, 09:44 PM

leftcoast66 · 10-07-2008, 09:48 PM

Here's mine, horrible pic... Still had exhaust underneath body. Now is in a million pieces again getting front end z'd then onto backhalf

PrerunnerRob · 10-07-2008, 11:19 PM

Mine-
bagged the first time

Bed has no wood so it sits lower

Stuffing 29" tall tire!

Lose the stock trailing arms, they are WAY more of a pain in the butt to work with then they are worth! This is the frame clip I made to clear them, I ended up cutting the whole rear of the truck off....

and you have to also remember to shave or remake the crossmember for the driveshaft...

Cutting off the rear clip progressed to crewcabbing it...

and here is where it sits now, back on the ground with the damn driveshaft crossmember holding it up again!

If you have any questions, PM me or ask them here, I'll tell you all I know and what to look out for!

dukes69 · 10-10-2008, 12:49 AM

i am thinking about doing it to my truck. did you guys buy a kit or build the air system? is it possable to not have to do any notching?

leftcoast66 · 10-10-2008, 01:03 AM

Quote:

Originally Posted by dukes69

i am thinking about doing it to my truck. did you guys buy a kit or build the air system? is it possable to not have to do any notching?

I used to run mine w/o a notch. Just don't expect a ton of drop. Atleast c notch it. Those are pretty simple and don't go all the way through the frame, but their also not as low. I bought a kit, but next time I would either talk w/ a shop and have them custom do kit to what I need, or piece something together.

c10addict · 10-10-2008, 07:19 AM

Quote:

Originally Posted by leftcoast66

I used to run mine w/o a notch. Just don't expect a ton of drop. Atleast c notch it. Those are pretty simple and don't go all the way through the frame, but their also not as low. I bought a kit, but next time I would either talk w/ a shop and have them custom do kit to what I need, or piece something together.

My 68 is C notched to the top of the frame rail, not through...

the kid · 10-12-2008, 09:22 PM

it is a pain!!!!! heads up order a straight notch due to the torsion x member the 63-72 wont work and depending on the size tires u want to run u may have to step it up. for the front is straight forward with a suicide doors member or porterbuilt good luck with the adventure

Slammed66 · 10-12-2008, 09:33 PM

Heres my ole heap...

vin63 · 11-20-2008, 12:54 PM

Quote:

Originally Posted by Slammed66

Heres my ole heap...

Sweet! What rear bumper is that?

the kid · 11-21-2008, 12:44 AM

yes sr. it is a lot of work especially working with a torsion bar frame

**ChiefRocka** · 11-21-2008, 09:56 AM

Quote:

Originally Posted by PrerunnerRob

Mine-
bagged the first time

Bed has no wood so it sits lower

Stuffing 29" tall tire!

Lose the stock trailing arms, they are WAY more of a pain in the butt to work with then they are worth! This is the frame clip I made to clear them, I ended up cutting the whole rear of the truck off....

and you have to also remember to shave or remake the crossmember for the driveshaft...

Cutting off the rear clip progressed to crewcabbing it...

and here is where it sits now, back on the ground with the damn driveshaft crossmember holding it up again!

If you have any questions, PM me or ask them here, I'll tell you all I know and what to look out for!

Your truck is way cool man....the more I look at it the more I can't wait till the end.....

Although, I think the stock "nascar" style trailing arms work great...no axle wrap and all you need is a sweet Watts link and your good to go !!!

**scotts62** · 11-21-2008, 11:08 AM

Mine. Getting there slowly, have to finish up the link arms in the back.

joe231 · 11-21-2008, 04:48 PM

Quote:

Originally Posted by vin63

Sweet! What rear bumper is that?

looks like a stock step side bumper

Imperial Kustom · 11-21-2008, 09:12 PM

Here's my pile. '62 with a pretty simple set-up.

Dustin07 · 11-21-2008, 10:22 PM

hey imperial, do you have more pics of the bd work? that's a great lookin' ride. I'd like to see the inside of the bed too.

badbowtieguy · 12-14-2008, 04:31 AM

1963 chevy truck

64CBagged · 09-02-2010, 07:01 PM

here's my 65' C-10

10-07-2008, 08:09 AM	#1
dukes69 Junior Member Join Date: Jun 2007 Location: owatonna mn Posts: 133	lets see some bagged c10s thinking bout baggin my 60. also is it a pain in the A$$ to do? __________________ 1968 chevelle ss 396 4spd 1969 chevy 4wd 350 4spd 1970 chevy c10 long box 1970 GMC 4wd long box

10-07-2008, 02:34 PM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: lets see some bagged c10s Here's what mine looked like just after I finished the front and rear suspension. This is at full drop (resting on the stops, so I can drive it in case there is a problem with the air bags). __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

10-07-2008, 04:37 PM	#3
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: lets see some bagged c10s heres mine.. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

10-07-2008, 09:44 PM	#5
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: lets see some bagged c10s

10-07-2008, 09:48 PM	#6
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: lets see some bagged c10s Here's mine, horrible pic... Still had exhaust underneath body. Now is in a million pieces again getting front end z'd then onto backhalf Last edited by leftcoast66; 10-07-2008 at 09:48 PM.

10-07-2008, 11:19 PM	#7
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: lets see some bagged c10s Mine- bagged the first time Bed has no wood so it sits lower Stuffing 29" tall tire! Lose the stock trailing arms, they are WAY more of a pain in the butt to work with then they are worth! This is the frame clip I made to clear them, I ended up cutting the whole rear of the truck off.... and you have to also remember to shave or remake the crossmember for the driveshaft... Cutting off the rear clip progressed to crewcabbing it... and here is where it sits now, back on the ground with the damn driveshaft crossmember holding it up again! If you have any questions, PM me or ask them here, I'll tell you all I know and what to look out for!

10-10-2008, 12:49 AM	#8
dukes69 Junior Member Join Date: Jun 2007 Location: owatonna mn Posts: 133	Re: lets see some bagged c10s i am thinking about doing it to my truck. did you guys buy a kit or build the air system? is it possable to not have to do any notching? __________________ 1968 chevelle ss 396 4spd 1969 chevy 4wd 350 4spd 1970 chevy c10 long box 1970 GMC 4wd long box

10-12-2008, 09:22 PM	#11
the kid Registered User Join Date: Aug 2008 Location: santa clara ca Posts: 47	Re: lets see some bagged c10s it is a pain!!!!! heads up order a straight notch due to the torsion x member the 63-72 wont work and depending on the size tires u want to run u may have to step it up. for the front is straight forward with a suicide doors member or porterbuilt good luck with the adventure __________________ making trucks pointless 1 at a time

10-12-2008, 09:33 PM	#12
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: lets see some bagged c10s Heres my ole heap... __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

11-21-2008, 12:44 AM	#14
the kid Registered User Join Date: Aug 2008 Location: santa clara ca Posts: 47	Re: lets see some bagged c10s yes sr. it is a lot of work especially working with a torsion bar frame __________________ making trucks pointless 1 at a time

11-21-2008, 11:08 AM	#16
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: lets see some bagged c10s Mine. Getting there slowly, have to finish up the link arms in the back. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 11-21-2008 at 11:09 AM.

11-21-2008, 09:12 PM	#18
Imperial Kustom 100% gearhead Join Date: Apr 2007 Location: Boise, Idaho Posts: 313	Re: lets see some bagged c10s Here's my pile. '62 with a pretty simple set-up. Attached Images

11-21-2008, 10:22 PM	#19
Dustin07 Stirrer of the Pot Join Date: Mar 2008 Location: washington Posts: 477	Re: lets see some bagged c10s hey imperial, do you have more pics of the bd work? that's a great lookin' ride. I'd like to see the inside of the bed too.

12-14-2008, 04:31 AM	#20
badbowtieguy Registered User Join Date: Nov 2008 Location: lott tx Posts: 29	Re: lets see some bagged c10s 1963 chevy truck Attached Images

09-02-2010, 07:01 PM	#21
64CBagged Registered User Join Date: Aug 2010 Location: Mammoth Lakes Ca Posts: 9	Re: lets see some bagged c10s here's my 65' C-10 Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.